I have an application that uses various script files. These files are not used for any AJAX purposes. However, I am using MS AJAX Libraries. My goal is to use the ScriptManager to manage release and debug versions of my JavaScript. Is this the right approach? Is there a better way to handle this task?
View 1 RepliesI have few confusions about build. What is release build and debug build? What are the output files for these builds? I had seen debug and release folders in bin folder. So the respective output goes into the respective folder? elaborate release and debug build. I dont want the difference.
View 3 RepliesI wish to compile my asp.net MVC application using aspnet_compiler.exe from the comandline to speed up cold startup.
I'm wondering how it determines if it should do a release or debug build. Is it always release? Does it depend on what the web.config file says when you run aspnet_compiler.exe?
What happens to an application that's been compiled w/ aspnet_compiler.exe if someone changed the debug attribute in the web.config file after it has been published?
My requirement is to check whether my application is in debug mode or release mode in DLL class.
View 6 RepliesWhat is a good approach to managing a debug and release connection string in a .NET / SQLServer application? I have two SQL Servers, a production and a build/debug and I need a method of switching between the two when my ASP.NET application is deployed. Currently I simply store them in the web.config and comment one or the other out, however that is error prone when deploying.
View 6 RepliesI'm on Windows Server 2008 with IIS 7.5 I have set up two web applications on the web site; one for the debug-build and one for the release-build for our system. I have not been able to figure out how to setup the two web applications so that they do not share the same native module.
When I access the debug-application (http://dev1/debug) it loads "G:workspaces ewreposdebuginRXWeb.dll" and the site works fine. However, when I access the relase-application (http://dev1/release) it also loads the "G:workspacesewreposdebuginRXWeb.dll" which is not want I want. I want it to load the "G:workspacesewreposeleaseinRXWeb.dll". Apart from that the relase-application works fine, loading for example its own database, javascript-files, images and so on.
I have tried many different configuration but obviously there is something I do not understand.
These are the changes I have made to applicationHost.config:
Under the section <globalModules> the following to rows are added at the end:
<add name="RXDebug" image="g:workspaces
ewreposdebuginRXWeb.dll" />
<add name="RXRelease" image="g:workspaces
ewrepos
eleaseinRXWeb.dll" />
The web.config for the debug-application looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<configuration>............
Is it possible to make some values in my Web.Config file dependent on whether I am building a release or debug based ASP.NET application?
View 3 Replies any way to deploy code with both release and debug mode together. I know it is logically impossible.
My requirement is to deploy debug based aspx page(for temporary) in release mode build in prod.. the concept is to avoid to put full release build on production again & again.
I am having a hardtime script debugging in VS2010 and IE8. I am using .net 4 framework.When i try to make a break point in my client script in VS2010, i get the respond "This is not a valid location for a breakpoint". Then I have tried to use IE8 Developebar, but when i try starting the script debugger it throws an alert, and tell's me that it couldent attatch to the process, because there may be another debugger attatched to the process.
View 4 RepliesI am developing a web site in Visual Studio 2008. I have a project for the web application and several class libraries as references. When I add the references I select the file under bin/debug in the class library folder. When changing the project to release mode the references still point to the .dll in the debug folder. Shouldn't this change automatically. How should I add the references so that debug and release are properly referenced?
View 1 RepliesPossible Duplicates: Debug/Release difference Performance differences between debug and release builds
What exactly is the different in compiling and running an asp.net/c# project in Debug mode VS Release Mode?
I'm trying to find a definite explanation of what effect compiling in release mode has on a .Net 3.5 web application versus debug="false". So far it looks like setting debug="false" has the same effect and compiling in release mode has been depreciated but I can't find any firm evidence this is the case.
This question looked promising but seems to be answering what's the difference between debug and release builds rather than release mode and debug="true":
[URL]
However it does link to this article:
[URL]
"This new compilation model makes the Configuration Manager for a web site obsolete. The only option appearing in a Visual Studio 2005 web site "project" is a Debug configuration. Don't fret - it means nothing. The web.config file now rules the school."
Now that is the closest I've had to an answer and it does seem to imply that release mode has been depreciated in favor of debug="false" but I can't find any confirmation of this on MSDN or any other source.
clarify this is a "Web Application Project" I am referring to.
To rephrase my question slightly, if I have the following setting in web.config:
<compilation defaultLanguage="c#" debug="false">
What effect (if any) does release and debug mode compile have?
how can i tell the diffence between a website that has been published in release mode and the same website that was published in debug mode
View 4 Repliesis there a way to use sql server to debug locally and mysql onthe remote published version ? perhaps with web.config and AppSettings ?
View 3 Replies I just upgraded to VS 2010 and MVC 2.0 and I noticed the web.config has two additional files attached to it? Are these files used to specify debug and release specific settings, so you don't clutter up the main web.config?
Does it even make sense to place a connection string in the root web.config file if I have have a local and remote one in the debug and release web.configs respectively.
I want to debug EditPanel.debug.js file of HTML Editor, but it never shows in VS 08 and Im sure it executes to that line.What I did to enable debuggingUnchecked both 2 checkboxes for disabling the debugging
Set ScriptMode="Debug"
Change following line
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.js")]
to
[ClientScriptResource("AjaxControlToolkit.HTMLEditor.EditPanel", "AjaxControlToolkit.HTMLEditor.EditPanel.debug.js")]
I have an existing site having a bulk of javascript used on the page. Now the page has to convert in AJAX but while using update panel my controls are not able to use existing javascript
It is not feasible to use ScriptManager.RegisterClientScriptBlock because script is around 200 to 300 of lines and also not feasible to move it in another JS File and Use ScriptManager.RegisterClientScriptInclude since each page has different script with almost same numbers of line Is there any way so that i can use existing script with minimum number of steps with full reusability
I have several ASP.NET sites, hosted on the same domain (different subdomains) and working via HTTPS.I have WCF service, hosted on the same domain.I have a separate state server for sessions. why - i will reply later, but it's a 'must') On my sites, I use grid components from Telerik (but actually it does not matter) that ask for data from WCF service and must be filled with this data.I cannot manage to make POST request to WCF service from javascript: for some reason it's always either GET or OPTIONS (no matter if I use Sys.Net.WebServiceProxy invoke or just a plain jquery AJAX request). It happens even if I indicate COOKIE mode
View 3 RepliesAs per Yahoo's guidelines for performance of web sites , javascripts should be combined in one to avoid extra http request , as i saw in YSlow asp.net loads 3 to 4 scripts one for MicrosoftAjax.js , one for microsoft MicrosoftAjaxForms.js & some other 2 which may tondle postbacks & client side validations , I want these 4 js to be in one.
View 2 RepliesConfiguration : Windows Vista,VS 2005,Ajax v1.0.61025 My Html Page
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Untitled Page</title>
<script language="javascript" type="text/javascript">
function fnCall()
{
try
{
var ans= Sim.Service.HelloWorld(OnMethodSucceeded, OnMethodFailed);
}
catch(e)
{
alert(e.message);
}
}
function OnMethodSucceeded(result)
{
alert('a');
}
function OnMethodFailed(result)
{
alert('b');
}
</script>
</head>
<body>
<form id="form1" runat="server">
<asp:ScriptManager ID="ScriptManager1" runat="server" ><Services>
<asp:ServiceReference Path="http://localhost/ajaxtest/service.asmx" /></Services>
</asp:ScriptManager>
<div><input id="Button1" type="button" value="button" onclick="fnCall();" /></div>
</form>
</body>
</html>
Web Service CS.
using System;
using System.Web;
using System.Web.Services;
using System.Web.Services.Protocols;
using System.Web.Script.Services;
namespace Sim
{
[WebService(Namespace = "http://tempuri.org/")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
[System.ComponentModel.ToolboxItem(false)]
// To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
[System.Web.Script.Services.ScriptService]
public class Service : System.Web.Services.WebService
{
public Service()
{
//Uncomment the following line if using designed components
//InitializeComponent();
}
[WebMethod,ScriptMethod(UseHttpGet=true)]
public string HelloWorld()
{
return "Hello World";
}
}
}
But i am getting Sim is not defined. Error. post ur comments. I have reviewed most of the forums. I am not able to clear
I am working with vs 2008 and C#. I am having a code behind function as follows(not complete)
protected void btnShowZone_Click(object sender, EventArgs e)
{
string setofalllatsandlongs = null;
foreach (string s in ar)
{
[Code].....
</div>In thIn the click event of the btnShowZone(in bold) i am calling the code behind method and from that i am trying to call the js function using the script manager class.
But the javascript method is not getting called.the control is not going to the js function.
I am successfully including a javascript resource by calling ScriptManager.RegisterClientScriptResource at the end of OnPreRender in my custom control. However, the resulting script tag is being included before the automatically included script tags that define things like Type and Sys which my script depends on. I thought they were defined in the order that they are included but I can't include my script any later then I am. How can I control the order in which the script tags are included?
View 2 RepliesI have a user control with both an UpdatePanel and a ScriptManager.
Some pages in the system have a ScriptManager of their own, and need to include the UserControl.
This throws the "You can only have 1 ScriptManager" exception.
If I remove UserControl's ScriptManager, I'll get 'UpdatePanel1 requires a Script Manager" exception.
I've tried to modify the UserControl to dynamically include it's own script manager if none exists. But all the methods I've used before involve adding a delegate to Page.OnInit-- which won't work, since the UserControl Init fires first.
Because the system designers here like making my life difficult, I can't create a MasterPage, or a BasePage for the system in inherit off of. I'd be stuck going to each page an adding a ScriptManager before the UserControl on each of them. Is there any way of, in the UserControl, detecting if the page has a ScriptManager, and if not, adding it dynamically in a way that makes the UpdatePanel happy?
I have a jQuery function in a .js file, and the function requires a querystring parameter to be passed. If I try to use the CompositeScript feature in the ScriptManager, it pukes on the file that has the querystring.
View 1 RepliesI use visual studio 2008. When I set breakpoints on code they don't break. So only thing I can do is to debug "manually" using firefox with firebug.Is there a way to debug with Visual studio?
View 1 Replies