Usercontrols - How To Load All Assemblies In Bin To Find A User Control
Oct 25, 2010
Part of a web application we have uses an in-house web control assembly. This assembly contains several web user controls where several of these are used by other web controls within the same assembly.
The assembly is built as a website with a web deployment project.
The main web application's pages are dynamically compiled through a service into a single assembly and placed into the appropriate bin folder. In our development server the old assemblies aren't always tidied up and removed, meaning the folder gets full of old assemblies.
When the page that uses the in-house web control assembly (mentioned above) runs, the asp.net instance throws an out of memory as it loads all the old assemblies in an attempt to determine which assembly houses the reference to the user control being used by the other user control inside the same assembly.
We've been using the following inside the top level user controls to register the other controls
<%@ Register Src="~/....ascx" TagPrefix="UC" TagName="...." %>
Of course when the application runs this gives no information as to which assembly it can find it in.
Is there anyone that's come across this problem before? It's not really a problem as our live servers use a clean up tool to remove old assemblies, but there are still potential situations where we could get out of memory caused by this (for example the tool stops working!), so it would be nice to resolve this problem.
Here is the stack trace
[Code]....
View 1 Replies
Similar Messages:
Jun 14, 2010
I got 15 tabs and 15 user controls assigned to each tab.All are loading at once which id delaying the process.
I want to load one user control on selection of a tab in tab container.
View 2 Replies
Sep 10, 2010
I'm doing a menu that loads levels dynamicly, when you click on a item the next level is loaded asynchronously. For each menu item I have a user control. Every user control is declared in its parent, for example, the "secondlevelcontrol" has the reference to "thirdlevelcontrol".With this level of nesting, I want to manage the asynchronous calls on every user control so, when the first level is loaded the javascript to load the second is loaded too. When the second level is loaded the javascript to load the third is loaded too.
To do asynchronous calls I'm implementing ICallbackEventHandler interface. As you can see in the examples, controls are added to the page as plain html. The method "ProcessOnLoadEvent" executes all lines of the "OnLoad" event of the user control.An example of the implementation is this for the user control of fourth level:
public string GetCallbackResult()
{
return _callbackRendering;
}
[code]...
View 1 Replies
Feb 18, 2010
I'm in the process of converting an ASP.Net webform into a User control and there an event that now says
no suitable method found to override
the event code causing the compile error
protected override void OnPreInit(EventArgs e)
{
//do some stuff
base.OnPreInit(e);
}
Is there any equivalent for a user control?
View 2 Replies
Jan 14, 2011
I need to look for specific types in all assemblies in a web site or windows app, is there an easy way to do this? Like how the controller factory for ASP.NET MVC looks across all assemblies for controllers.
View 3 Replies
Feb 2, 2010
I'm trying to write some code to use reflection to load new assemblies. I observed the file system with FileSystemWatcher, so that if anything in the folder changed, I can get notified and then reload them.
Firstly I have an assembly filters.dll loaded. Let's say its version is 1.0.0. Then when I have a new one v1.0.1, I paste it into the folder and replace the older one. Of course this fires "Change" event of FileSystemWatcher, and finally lead to assembly reloading.
Everything works fine, but I just want to know, what would happen to the firstly loaded assembly? Get replaced by the newer one? Or still somewhere in the memory?
View 11 Replies
Jun 1, 2010
I'm trying to deploy a website stored on a network shared storage. My problem is that I am unable to load assemblies that reside on the remote machine.I load some assemblies by using
assembly = Assembly.LoadFrom(Uri.UnescapeDataString(new UriBuilder(satelliteExpectedLocation).Path))
where the satelliteExpectedLocation is in the form "file:\10.0.0.85 mpappinMessages.resources.dll".
I got a FormatException on this one, so I modified the path to read "file:////\10.0.0.85\tmp\app\bin\Messages.resources.dll"
Now I get a "System.IO.FileNotFoundException".I read on MSDN that the "File" scheme is to be used for resources on the local machine. But how should I get the resources on the network share?
View 2 Replies
Nov 12, 2010
I have a project with hundreds of usercontrols but many of them are old and no longer used. Is there are quick way to find out which ones can be deleted?
View 1 Replies
Mar 23, 2010
When I use Project Reference to add dependent assemblies to my C# library project, I can use the "Go To Definition" popup menu item to go to the source file of the class defined in the dependent assembly. That is one of the most useful features of VS for me. However, when I add dependent assemblies as BIN References (via the Browse tab of the Add Reference dialog), I only get the class definition generated from metadata of the dependenat assembly, not the source file.
I realize that intellisense can't find the source directory of the dependent assembly, but where can I enter the directories so intellisense would know? There is a "VC++ Directories" page in the Options->Projects and Solutions dialog, but that is only for C/C++ projects. There should be one for C# as well. The bigger mystery is when I put my project in the debugger, I can step into methods defined in the dependent assembly and see its source file. Why could the debugger find the source file but not intellisense?
View 2 Replies
Jun 4, 2010
I have written a user control that captures some user input and has a Save button to save it to the DB. I use a repeater to render a number of these controls on the page - imagine a list of multiple choice questions with a Save button by each question.
I am loading the user control inside the repeater's ItemDataBound event like this (code simplified):
[code]....
The problem is that when the Save button is clicked, the page posts back, but lbnUpdate_Click is not called. The Page_Load event of the page itself is called however.
I should mention that the repeater is part of a user control, and that user control is loaded inside another user control (this is a DotNetNuke site which makes heavy use of user controls). The Save button link looks like this:
javascript:__doPostBack('dnn$ctr498$AssignmentsList$rptAssignments$ctl04$ctl00$lbnUpdate','')
View 3 Replies
Mar 17, 2011
I am trying to load a usercontrol with its own model, how does this work in practice? What I want really is to click on a button in a View which opens up a UserControl in the center of the page but there will be no sending my model to it because the model used on the page does not contain what I want it to display in the control (More detailed, the page is a memberpage and the uc is an admin page for approving images sent by other members). I've messed around with Inheritance but not really gotten any good results from that perhaps im doing it wrong). This is how it looks today:
The Model
[Code]....
The Controller
[Code]....
The Link
[Code]....
The UserControl
[Code]....
The Error
What can I do differently to make this thing work properly?
View 9 Replies
Jun 22, 2010
I am hoping someone can help me out. I have a web application that contains a usercontrol think "employment details" a user can enter a previous employment detail.
I have created a page that contains an update panel a placeholder and a button. The button I want to use to load a new copy of the same usercontrol. Can anyone point me in the right redirect?
View 2 Replies
Mar 18, 2011
I have built a "portal" that displays "widgets" (server side usercontrols). The page contains two columns, each containing an updatepanel. Each widget contains an updatepanel and multiview with the default view showing a "loading" message and the second view contains the actual content.
When a user logs in, I query the database to get a list of widgets the user has access to, along with their column and order number. During page init, I add all of the widgets to the page's columns in the order indicated. Once the page loads, a timer on each widget gets fired and the widget's multiview switches from the "loading" view to the content view and sets the content's visibility to true. This forces the content to load.
Setting up the load this way makes the page load appear faster because it doesn't process any of the widget data until after the initial page load. This all works fine but I have an issue with the order in which the widgets get loaded.
Currently, the page loads and the widgets will start loading from the top of the left column down to the bottom, then it will start loading the top of the right column. The page could potentially have many widgets so I end up staring at a bunch of loading messages on the right side while I wait for the full left column to load. I would really like to be able to load top down across both columns instead of the whole left column and then the right column. For example, load the first widget in the left column, then the first in the right, and so on. This way, the user would have something to look at the top instead of staring at a bunch of loading messages and having to scroll down the page while it loads.
View 1 Replies
Jan 11, 2010
i have:
- Default.aspx;
- user1.ascx: 1st user control containing repeater;
- user2.ascx: 2nd user control containing a detail view of row.
In page.aspx i dinamically load the repeater inside a user1.ascx.
after i want to dinamically load the 2nd user control also in default.aspx by a button inside a user1.ascx.
How i can do this? I can't load user2.ascx inside user1.ascx but only in aspx page.
View 2 Replies
Nov 10, 2010
I have on dropdown that show hide user control. In the user control i have Ok and Cancel button.
When the dropdown change i want to apply ValidationGroup on the Ok button that is inside UserControl.
View 2 Replies
Apr 4, 2010
I have a Master Page and in it I have two user controls,User control 'A' and User control 'B'.
so A and B are in the Same MAster page,I have a Button on Aand when ever i click a button I want to Load Usercontrol B(Call its Page_Load) Method...How will i do that?
this is the code but i get an error at line 'C' --- Null Reference Exception was unhandled
[Code]....
View 8 Replies
Apr 30, 2010
when I reference a assembly. It's reference gets added to the project file in my case ( ABC.csproj)
Also when I take a look at the web.config file there is a section called <assemblies>. And lot of assemblies are added there.
What is the difference between link to the assemblies in the Project file and the assemblies in the web.config file?
View 1 Replies
Jan 28, 2011
I have an aspx web application in which 1 aspx page and 1 web user controls exist. I added 4 instances of the user control in aspx page. There is a remove button in user control which is used to remove the control from the aspx page. If I click on remove button of the user control, how can I find that which user control's remove button is clicked from the aspx page.
View 3 Replies
Apr 15, 2010
<%@ Page Language="VB" AutoEventWireup="false" CodeFile="Default.aspx.vb" Inherits="_Default" AspCompat="True" %>
<%@ Register src="Modules/Content.ascx" tagname="Content" tagprefix="uc1" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
[code]...
But still no results unfortunately.
View 2 Replies
Dec 1, 2010
We have an application where the controls are dynamically added to the form based on the logged in user,
This user controls related data is stored in the database. There is lot of logic in the code behind in the asp.net webforms which is so messy to maintain it, we are planning to re-write it using the MVC framework.
I would say there would be rougly 50 different forms based on the user logged in, is it good idea to create so many views and redirect to the appropriate view based on the logged in user, in some of the forms there might be minor difference like the order of the Control might change.
View 3 Replies
Mar 31, 2010
So all I want to do is simply find a user control I load based on a drop down selection. I have the user control added but now I'm trying to find the control so I can access a couple properties off of it and I can't find the control for the life of me. I'm actually doing all of this in the master page and there is no code in the default.aspx page itself.
MasterPage.aspx
[Code]....
MasterPage.cs
protected void goToSelectedPage(object sender, System.EventArgs e)
{
temp1 ct = this.Page.Master.LoadControl("temp1.ascx") as temp1;
ct.ID = "TestMe";
this.UpdatePanel1.ContentTemplateContainer.Controls.Add(ct);
}
//This is where I CANNOT SEEM TO FIND THE CONTROL ////////////////////////////////////////
protected void lnkSave_Click(object sender, System.EventArgs e)
{
UpdatePanel teest = this.FindControl("UpdatePanel1") as UpdatePanel;
Control test2 = teest.ContentTemplateContainer.FindControl("ctl09") as Control;
temp1 test3 = test2.FindControl("TestMe") as temp1;
string maybe = test3.Col1TopTitle;
}
Here I don't understand what it's telling me. for "par" I get "ctl09" and I have no idea how I am supposed to find this control. temp1.ascx.cs
protected void Page_Load(object sender, EventArgs e)
{
string ppp = this.ID;
string par = this.Parent.ID;
}
View 1 Replies
Apr 26, 2010
let say i have Two user control U1 and U2. I have a treeview control T1 U1 include a one datalist. U2 include a one datalist. I Place a U1 in a aspx file call home.aspx where i use a placeholder for dynamicly load user control. t1 is a treeview for menu so when i click on a parent item i load u1 in placeholder and when i click a child node in t1 then i can load u2 in place holder. Here u1 content parent data like product category. U2 content child data like product sub category. click t1 parent node load u1 and child node load u2 ok.but if a user click on u1 dataitem it also need to laod u2 and unload u1.
can it be possible? or if anyone can guid me how to use single page with multiple user control response each other event.
View 2 Replies
Mar 5, 2011
Is there a way to instantiate and use a usercontrol (.ascx) if given you have its Type (ie. typeof(MyUserControl))?With regular asp.net controls like a textbox or a dropdownlist you can just make a new instance and add it to a controls collection. This doesnt appear to work for User controls. While you can make a new instance and add it to a collection, and have all of its events fire, it will not actually render to the page. Typically you would call Page.LoadControl() with the path to the .ascxThis presents a problem if all you have is its type. How can you get the path to the .ascx to give to the LoadControl method. Ideally I would also like to not have to have a reference to the Page object
View 1 Replies
Jun 18, 2010
I just want to call a user control using AJAX and get the rendered html of the control. However, when I try and fetch the control I get the following error message:
This type of page is not served.
Description: The type of page you have requested is not served because it has been explicitly forbidden. The extension '.ascx' may be incorrect. review the URL below and make sure that it is spelled correctly.
Requested URL: /Controls/ClientFormControl.ascx
Is it possible to make this type of page servable, or is there a specific way you need to call it? I know such things are easy in MVC frameworks...
View 2 Replies
Sep 30, 2010
Im working with Sitefinity and I'm developing a Control Designer - however i dont think my question is specific to SiteFinity.
I have a class such as:
public class CaseStudyFeaturedItem : CaseStudySelectorControlDEsignerBase
The class it is inherriting from is itself inheriting from UserControl, like so:
public class CaseStudySelectorControlDesignerBase : System.Web.UI.UserControl {
Within CaseStudyFeaturedItem is it possible to load a template which is an embedded resource and then access the controls on that control?
So essentially, I have usercontrol.ascx which is an embedded resource so has a string like:
mynamespace.myclass.usercontrol.ascx;
And from within CaseStudyFeaturedItem I want to be able to load that usercontrol and then modify the controls (i.e. literals/labels) that are within it?
View 2 Replies
