After i publish my web.config i get null reference to all the code that uses the webconfig.What could be happening?I checked my web.config property and its set to Embedded Resource.
View 2 RepliesI am struggling to publish a site built (and working locally) using VWD 2010 Express to a production server.I realise that this is because I don't understand enough about the relationship between the website and SQL server and I certainly don't know enough about the way SQL server works in general. Can anybody recommend some learning resources - books, tutorials, vids etc, that explain the background and in particular address the issue of how to publish to a production server.
View 2 RepliesThis is just a small problem with some form of workaround im sure.I'm ready to publish my ASP.NET website, however, there is no 'Publish' option when I right click the project in solution explorer or even a Build Tab on the menu. I'm using Visual Web Developer 2010 and having done some research they all refer to this option in the Tab menu when I don't even have the Build tab myself.I did also see something to Download but I accidently closed the tab in a hurry - WebPI is it? Will this work?
The reason I want to 'Publish' ideally via MS VWD 2010 Express is that in previous versions (VS 08) when it 'Publishes' is combines the .cs/vb files with their respective pages rather than upload them as seperate files through FTP.I know some changes need to be done with the web.config file so If there is any info on that and other essential info I need to know please help me out (links references wud do! :P)
I just recently upgrade my asp.net web project from visual studio 2005 to visual studio 2010. The upgrade was successful with no problems however im missing some features with this project. The One Click Publish feature(which is greyed out) in the header area of Visual Studio 2010 and the Add Config Transforms feature which is no where to be seen when you right click on web.config. When i create a new web project straight from visual studio 2010, these options work fine.
View 1 Replieswhen i opened my Visual Studio 2010 i noticed that my ajax tab was missing from my toolbox and ajax control kit too.Then i noticed even that when i create new website, there is no web.config in it and it should be.WHAT IS GOIN ON???? :/
View 13 RepliesI just installed VS2010 and opened the root machine.config and web.config files for review and I found some errors. In machine.config, the following line has errors in both entries for <Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior>. When I hover the cursor over them I get a tooltip text which displays: "The element 'endpointBehaviors' has invalid child element 'Microsoft.VisualStudio.Diagnostics.ServiceModelSink.Behavior'. List of possible elements expected: '...(list of options here)...'. The same problem happens for the second appereance in tag <serviceBehaviors>.
[Code]....
In web.config, there is a tag called <protocols> that has an error with a tooltip text that says "The element 'system.web' has invalid child element 'protocols'. List of possible elements expected: '...(list of options here)...'.
We have a shared drive where web applications are published to. When I attempt to publish I get the following error:
------ Publish started: Project: XXX.Web, Configuration: Release Any CPU ------
Connecting to T:WebSitesXXX...
Unable to create the Web site 'T:WebSitesXXX'. The path 'T:WebSitesXXX' does not exist or you do not have access. The system cannot find the path specified.
Details
OS: Windows 7
IDE: Visual Studio 2008 (running as administrator)
Path exists? Yup.
I assume it's some permissions issue, but I have no idea where to start.
If you could give me some guidelines It would mean a lot to me. what type of authentication I use, how to do id from localhost, how to modify web.config file etc
View 1 Repliesthis is an extremely frustrating situation. We have just upgraded to Visual Studio 2010, and very nice it is, except for when it won't do something really simple, like Publish your ASP.NET Web Application to a folder on your desktop.For some unearthly reason, what used to work flawlessly in 2008 is now generating an error: It stops Publishing, after successfully Building, saying:Error: Copying file ImagesProfile32_32.JPG to objx64ReleasePackagePackageTmpImagesProlfile32_32.JPG failed. Could not find file 'ImagesCelebrityProfileImages32_32.JPG'.The problem is that there isn't any reference to that file in the project code (in the database, yes, but not in the code itself), and we don't want to store such images with the project (and they're not).Why (and how) has it suddenly decided that this unreferenced image (and presumably more if I get it to move past this one) is suddenly necessary to run the project? How can I stop this from happening?
View 1 Repliesin Vs2008 ，I copy the ".dll" file to: ...Program
FilesMicrosoft Visual Studio 9.0Common7PackagesDebuggerVisualizers.
they works well。
but in Vs2010, copy the ".dll" file to: ...Program
FilesMicrosoft Visual Studio 10.0Common7PackagesDebuggerVisualizers.
there is a error.
I just moved into a new computer running Windows 7 pro, and I installed a new copy of VS2010. Now all of my old sites that I made in VS2008 do not have their web.config files. Does anyone know what happens to them in VS2010, or Windows 7?
View 3 RepliesI'm using VS 2010 Express Edition (VWD) to develop a website project that will be deployed to a Windows 2000 Server (targeting .NET 2.0). BACKGROUND: The website was new, so I chose the 'c# blank website' project template in VS 2010. This (as you may know) gave me an extremely more lean web.config file than VS 2008. I like that for 4.0 development, but I'm going to be deploying it to the testing region tomorrow and I'm getting concerned that all that extra stuff that used to be in the web.config is going to bite me.
View 1 RepliesI'm trying to publish my ASP.NET web application in Visual Studio 2010. I'm then trying to install it as a website on a server using IIS. I've gotten my application to publish (to a .zip file) but it points to the physical directory on my hard drive. This obviously will not work on the server.
View 3 RepliesI am working on an ASP.NET project in Visual Studio .NET 2010 and attempting to make an MSI installer using a Web Setup Project. I added the Primary output from the project (which seems to pull in the relevant dependencies) and the Content Files from the project (which pulls in the Web.config and the .svc files).
The issue is that rather than applying the XDT transform and creating the Web.config using the Web.Release.config, it just copies the Web.config, the Web.Release.config, and the Web.Debug.config into the installer without doing any transformation at all.
How do I get it to apply the Web.config transformation before creating the installer?
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 RepliesI have installed VS2010 ultimate and have read with interest about the new publish options, config transformations but none of them are available. I have tried creating different release versions and cannot see the option, also have no new options for publish, just look like the VS2008 ones.
Is there some service pack or pack that i need to install these or does it sound like a reinstall?
I'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesA reply to the following post says not:
[URL]
If it is possible, can anyone point me at an example?
I have a directory with sources of a web application (developed with visual studio 2008) without solution's files. Now I want to create a new web application in visual studio 2010, whit the existing sources.
View 2 RepliesI am facing an amazing problem in ASP.NET. I have a website with many sub directories. The sub directories have aspx and aspx.cs files but do not contain web.config files. I am using the web.config file of the parent directory for storing config items for the respective code files in sub directories. But when i m trying to read the web.config using ConfigurationManager.AppSettings[] with absolutely the correct keys, there's no value being returned. Most amazing fact is, this same code works fine in dev enviroment but not in staging.
View 1 RepliesI am getting this error, and cant figure out what the issue is.
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: 'JobManager.Contact' is not allowed here because it does not extend class 'System.Web.UI.Page'.
Source Error:
Line 1: <%@ Page Title="Contact" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
Line 2: CodeBehind="Contact.aspx.cs" Inherits="JobManager.Contact" %>
Line 3:
Source File: /Contact.aspx Line: 1
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
The code behind syntax is:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
namespace JobManager
{
public partial class Contact : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
}
My colleague and I are both using VS 2010 and we have created a web application each. We can both publish our own applications to a ftp (web host's) and it works fine. However, if my colleague send me his solution and I run it locally on my machine it works but when I try to publish it I get promped for password and I enter it (same as I use for my application) but it fails. Same for my colleague if he takes a copy of my solution and tries to publish it.
View 1 RepliesI'm using FCKEditor, and have downloaded a plugin for it. This plugin requires the folder (called 'integration') to be set up as a virtual application. Now I've managed to do this with my web hosts, but I want to do it locally too so I can test it locally. how to convert this folder into a web application? At the moment, all of the aspx pages cannot see an object which resides in the integrationin folder.
View 1 RepliesI'm trying to migrate an old asp.net 1.1 application to target the new .net 4.0 framework. There are good guides available on this [URL]. However, all approaches start with the assumption that the 1.1 project contains a solution file which one has to open using VS 2010 and go through the conversion wizard.
In my case, the project does not have any solution file, giving me a sort of chicken and egg issue.
Is there a way to add a 1.1 .net soution file with or without VS 2010? Using command line tools? What is so special about a solution file anyway?
i just downloaded an RSS Toolkit for .net.
where do i need to place it? in which folder so it will become available on my visual toolbars?
and what types of files do i need to place in this folders? is it the *.dll only or more?