i just downloaded an RSS Toolkit for .net.
where do i need to place it? in which folder so it will become available on my visual toolbars?
and what types of files do i need to place in this folders? is it the *.dll only or more?
I have downloaded all the required setup to use windows application. I am using vs 2008, already downloaded Windows Mobile 6 Professional SDK Refresh, Windows Mobile 6 Standard SDK Refresh. its buliding and deploying successfully. But I am not able to place tools, because there are no tool in toolbox. What i should do to see the tools in tool box.
installing visual studio 2010 pro RC in windows Xp SP3 and getting a message prompt : invalid windows installer package contact vendorlog file says
Error Message:
[02/22/10,17:09:07] Microsoft Application Error Reporting: [2] CMsiComponent::Install() expects the setup file for Microsoft Application Error Reporting, but the file failed verification.
[02/22/10,17:09:07] setup.exe: [2] ISetupComponent::Pre/Post/Install() failed in ISetupManager::InternalInstallManager() with HRESULT -2147467259.
[02/22/10,17:09:08] VS70pgui: [2] DepCheck indicates Microsoft Application Error Reporting is not installed.
I'm trying to migrate an old asp.net 1.1 application to target the new .net 4.0 framework. There are good guides available on this [URL]. However, all approaches start with the assumption that the 1.1 project contains a solution file which one has to open using VS 2010 and go through the conversion wizard.
In my case, the project does not have any solution file, giving me a sort of chicken and egg issue.
Is there a way to add a 1.1 .net soution file with or without VS 2010? Using command line tools? What is so special about a solution file anyway?
I'm trying to deploy my MVC 2.0 web application to a Windows 2003 server with IIS6, and can't find the means to do it. I read about clicking Build/Deploy, but I don't have this showing on my menu, and I have the professional version.
View 1 RepliesWhere is ASP.NET Configuration Tool located in Visual Studio 2010?
View 1 RepliesI have a clean installation of Windows 7 with VS2010 RTM and am trying to get the ASP.NET Development Server to work. When I run the project, the WebDev server starts and shows that it's listening on port x on localhost. I've tried:telnet to the port. The port is not listening. running netstat -o shows that the WebDev server is in fact not listening on any port. manually changing the WebDev port to a different port and restarted VS without effect. I have Windows Firewall turned off entirely and am not running any other firewall software either.
View 1 Repliestry to install visual web developer 2010 from web installer,http://www.microsoft.com/express/Downloads/#2010-Visual-Web-Developer once installer screen pop up, it stated that it is not supported for windows vista platform. However, previously before formatting pc, it has successfully installed once.
View 1 RepliesI am lookinf for a Unit testing Tool for asp.net web application. i intended to use visual studio 2008 web test. Please tell me where can i get nice tutorials to start up on this tool. and also suggest me is any other web testing tools out there.
View 1 Repliesi am installing on windows 7 visual studio 2010 but still continuing about 2 hours
View 1 Replies[Code]....
I'm working on the following aspx file, and for some reason VS2010 is messing with my code. I have no idea why, and was hoping one of you could have a look at it.
What happens is that most of the times when I hit ctrl+s, it add some code to the end of the file.
I'm trying to publish my ASP.NET web application in Visual Studio 2010. I'm then trying to install it as a website on a server using IIS. I've gotten my application to publish (to a .zip file) but it points to the physical directory on my hard drive. This obviously will not work on the server.
View 3 RepliesVS 2010 crashes instantly when I press = when adding the class attribute to anything.
The exact error I get is
Microsoft visual studio 2010 has stopped working.
Adding any other attribute works fine.
I have a vs 2008 project that I converted to vs 2010. I added a label to my aspx page but I couldn't get it be recognized in the c sharp until I realized that it wasn't added to the designer.cs file. I added it to that file like this:
[Code]....
and it worked fine. Why would I have to add something to the designer.cs file though? Shouldn't this have been created automatically when I built the project?
would like to ask about how can I insert a menu bar in a Web site that is created in visual studio 2010.
My toolbox seems to not have a menu tool inside.
Is there a way to drop a menu in my page like I drop a button?
I tried to install Visual Studio Prof 2010 trail version in my system, but i got an error saying 'Please remove/uninstall Visual Studio 2010 load test controller' to proceed installation. i uninstalled my previous VS2008 software from system and i could not find anything like 'Remove/Uninstall Visual Studio 2010 load test controller' software in my Add/Remove Programs.
View 1 RepliesCan Visual Web Developer 2010 Express Edition install on Windows 7 Home Basic Edition?
Any official links of microsoft website which states that are great.
Is there anything special to do with Windows 2008 R2 Server and Visual Studio 2010 to get Oracle quereis to work? I have the same DB Connnection.string I have used before and it works. I am at a loss here.
View 6 RepliesI'm about to start a new module in my existing web application project (already completed 3 modules), due to more data entry and volume of data handling my PM informed me to go this module on windows application (vb.net), but i'm requesting him to go with web application since i'm much familiar in web applcation and all my completed module on web.
But he is thinking on performance part too, if i get some idea / suggestion on the same so that i can clear and i will go with either option.
The module is Service Billing with LPO Control, Billing, Proforma, eBilling, eApproval, online billing etc.
can Visual Studio 2008 be All-In-One tool to integrate source code continuously from team members, build, unit test?
Having used Visual Studio Team Edition 2005, unit testing each method within VS itself. I strongly believe that it is feasible to add-on tools. Example ankhsvn tool to use SVN from Visual studio [URL]
In my investigating i have come across number of tools(shown below) to use with Visual Studio 2008 professional
Development tool:- Visual Studio 2008 professional using Subversion as source control tool. Continuous Integration:- Hudson or Cruise control Build tool:- NAnt Testing:- NUnit, Selinium As Visual Studio 2008 can be used for unit testing I think NUnit is out of consideration.
In the same way i would like to have any other tools/add-ons to Visual studio to implement continuous integration, building and unit testing. This process should be automated such a way source code between team members is continuously integrated, built and unit testing is done as configured.
Objective is to use few number of tools as add-on to Visual Studio or achieve most from Visual studio itself (example unit testing). Visual Studio should be all in one tool.
I am aware that Team Foundation Server best suits my requirement, but it is out of scope due to its cost.
I'm thinking about installing vwd 2010 or vs 2010 express but want to know if either offer integrated jquery support.
View 4 RepliesI'm trying to build a windows application running in Windows 7 that access the TFS work items and I'm getting an error messenge that says:
Could not load file or assembly 'Microsoft.TeamFoundation.Client, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies.
I dig up a little bit to find out what is happening and I found out that the assembly must have a strong name which I'm still trying to understand how to give one to it but before that I tried to run the same code but as aweb application and it's running just fine. Running the same windows application in
windows Vista also works. Debuging the windows application in windows 7 code the error throws when a rotine that has an object been stantiated to the class TeamFoundationServer is called. This class is into the Microsoft.TeamFoundation.Client.dll which is the dll that I should give the strong name, and may be solve the problem. What I would like to know is if it already have happened with you to some reference doesn't work to a specifc kind of application and if giving a strong name solved your problem or from your experience what might be occurring?
A reply to the following post says not:
[URL]
If it is possible, can anyone point me at an example?
I have a directory with sources of a web application (developed with visual studio 2008) without solution's files. Now I want to create a new web application in visual studio 2010, whit the existing sources.
View 2 RepliesI am getting this error, and cant figure out what the issue is.
Server Error in '/' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: 'JobManager.Contact' is not allowed here because it does not extend class 'System.Web.UI.Page'.
Source Error:
Line 1: <%@ Page Title="Contact" Language="C#" MasterPageFile="~/Site.master" AutoEventWireup="true"
Line 2: CodeBehind="Contact.aspx.cs" Inherits="JobManager.Contact" %>
Line 3:
Source File: /Contact.aspx Line: 1
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
The code behind syntax is:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
namespace JobManager
{
public partial class Contact : System.Web.UI.Page
{
protected void Page_Load(object sender, EventArgs e)
{
}
}
