I had a powerbuilder application which i converted to web application in the format of ASP.Net (aspx) files.after deploying and publishing the converted web application (copy it and add ASP.Net and network Service AND IUser permissions to enable users to access it) in IIS V6.0 over Windows server 2003 and The ASP.Net version is 2.0
View 1 RepliesI have a website in IIS 6.0 using an application pool with a custom service account. when I browse the website, I get an error "service unavailable" and the error in event log says "The identity of application pool 'SampleAppPool' is invalid, so the World Wide Web Publishing Service can not create a worker process to serve the application pool. Therefore, the application pool has been disabled". I think the utility "Aspnet_regiis" can be used to grant access to an account to IIS metabase according to the article [URL but is that the right way to fix this issue? because this utility is used for multiple things and may do more than just granting the permissions to the account, or should I just add the account manually to "IIS_WPG" group?
View 2 RepliesIn asp.net c# , i want to implement auto website browsing i.e. when the user enters his user id and password on login page, the login button should be clicked automatically and a new browser should open and then the page should be redirected to desired page and then on the new page another linkbutton gets clicked and again redirect and so on.
View 1 RepliesI sent a lot of time trying to trouble shoot IIS 6.0 yesterday on a pre-compiled website. I could never browse the default web page. I got the initial bar on the bottom right when I set up the site but then got a blank page. The I got frustrated with IIS and decided to try just copying all my web application files to the IIS server. When I did this the application worked! I have used pre-compiled sites before with no problem.
View 2 RepliesI have a website on visual studio 2008 on my local machine. When I run through the debugger I get the following error, however when I browse the same website through the IIS manager (running IIS7.5), I can browse it. What do I need to fix to run it through debugger? The website is set as an application.
Error:
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. review the specific error details below and modify your configuration file appropriately.
[Code]....
I just want to see error insteas of asp.net showing me default error Server Error in '/' Application. What should i change in web config?
mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors
We are Running Windows 7 or Windows 2008 using integrated pipeline (not classic) and we are Getting 404 Errors when mixing MVC with Website and / or WebApplication ProjectsHowever, this problem doesn't exist when I run off the web server locally in visual studio, only when I use IIS 7.5. Is there anything special you need to configure in IIS 7.5 in order for website and webapplication projects to use MVC? I wouldn't think so, but when I run mvcapplication on IIS 7.5
View 21 RepliesVisual Studio 2008 shows a lot of erroneous errors when building a website (not a web project) in the errors list. These errors are usually corrected (removed) when I rebuild the site a couple times but they cost me wasted time.Is there anyway to hide the erroneous errors?
Update:
I've decided to look into this to see if I could reproduce it. This is the exact behavior I am seeing, using the website model, I type some invalid syntax on a page. The errors list fills up with errors. I correct the error and the errors list does not update. I build the project and the errors list still shows the errors but the build shows as build completed. I build the project a second time and the errors list is cleared.
My question is there anyway to make the errors list clear on the first build? I thought it might have something to do with page build vs website build but it seems to make no difference. I am not using any third party dlls on this website.
i have a website, which i have designed almost 3 months ago. it is totally html site and no database is used. basically it is a site having PDF books on it. i have more then 300 books on my website. but now i want to change my website into dynamic asp.net, so that i can easily handle my data of over 300 books. is there any tool available to convert the site? or i have to make the site from start?
View 9 RepliesI've read different posts on both of these issues and maybe I'm just not understanding what needs to be done. Here is my dilimma. I am running Windows Vista with IIS 6 and coding in VS 2010 using .NET 4 for the ASP.NET site. I installed the AjaxControlToolkit.NET4 in VS 2010 with no issues. I even used the TabContainer and had no problems on my machine, at least when debugging. When I publish it out and install on my remote Webserver 2008 with IIS6, I get the following errors:
Webpage error details
Message: ASP.NET Ajax client-side framework failed to load.
[code]....
I can't see the tab container...Likewise My reports (using reportviewer) on local machine are displaying perfectly but on my webserver they are not showing...
I recently upgraded one of my hosting accounts on Godaddy to unlimited in order to eliminate several redundant hosting accounts. I ftp'd a website and published the databases into the unlimited account ok but I'm getting server errors which seem to be caused by the fact that the primary website is somehow interfering with the website which was transfered into the hosting account. The latest error is
[Code]....
We recently migrated from VS 2008 to VS 2010. The migration went fine, except for our web project. Before, in VS 2008, the site showed up as http://localhost/Website. Now, it appears as C:...Website. It appears that when we did the migration, VS started to treat it as a file system website.
I've tried removing the existing site and re-adding it as an existing website, but it still displays it as C:...Website. Is there any way to convert it back to show it as a http://localhost/website, and run through IIS, as opposed to the default ASP.NET Development Server?
After following the instructions in Scott Guthrie's blog for converting a web site to a web application project, I am getting many, many errors. Most are either 'Name <control> is not declared.' or 'Type <type> is not defined.' And most, but not all of these errors are in the same .vb page.
Does anyone know the best way to fix this?
I have a C# web forms ASP.NET 4.0 web application that uses Routing for URLs for some reason custom errors defined in the system.web section of my web.config is entirely ignored and it will fall back the IIS errors.
This gets entirely ignored
[code]....
This would be a minor inconvenience except that by the fact it falls back to IIS native instead of my application it completely circumvents Elmah logging my 404 exceptions correctly.
I wasn't sure which subforum to post this in as it appears to be a complex widespread issue. I have a WebApplication that was mostly coded in VB but had two C# classes and everything was working fine and it was created in VisualStudio 2005 as a Website. I finally finished converting the existing WebApplication as it was to C# and everything compiled fine. Trying to organize and such I created new Classes, DAL and BLL and migrated the existing classes into the appropriate location. Still compiled fine. Here's where the problems started.
Wanting to move from a Website to a Project, I created a new project WebApplication and migrated all the files from the Website into the Project. I re-added the references to the classes and .Net components and updated all the project settings to mirror what was in place before. Now when I try to compile. BAM. 171 Errors, mostly "The name '' does not exist in the current context." It appears most of them are in regard to Profile or accessing page components (Labels, Textboxes, etc) I can provide more detail about specific errors if needed but I was hoping maybe I just didn't do something incorrectly when moving to a Project from a website.
I've just spent the last few days writing a website using Visual Studio 2010, in ASP.NET. I've just gone to publish it to my website, and found ASP.NET is not supported! Apparently ASP is supported though - is the solution to convert from ASP.NET to ASP? Is this possible? Is there a better alternative?I'm not the best programmer in the world (hence my mistake)
View 1 RepliesI'm getting two of these errors when trying to build the full solution for our website. Here's the full text of the errors:
Error 91 Cannot copy assembly 'Emcom.DataAccess.dll' to file 'C:workevan-moor.com-trunk2007.evan-moor.comBinEmcom.DataAccess.dll'. Unable to add 'C:workevan-moor.com-developmentEmcom.DataAccessinDebugEmcom.DataAccess.dll' to the Web site. Unable to add file 'BinEmcom.DataAccess.dll'. The process cannot access the file because it is being used by another process.
C:...2007.evan-moor.com
Error 92 Cannot copy assembly 'Emcom.DataAccess.Generated.dll' to file 'C:workevan-moor.com-trunk2007.evan-moor.comBinEmcom.DataAccess.Generated.dll'. Unable to add 'C:workevan-moor.com-developmentEmcom.DataAccessinDebugEmcom.DataAccess.Generated.dll' to the Web site. Unable to add file 'BinEmcom.DataAccess.Generated.dll'. The process cannot access the file because it is being used by another process.
C:...2007.evan-moor.com
I've done everything I can think of short of reinstalling Visual Studio to try and fix this and nothing works. One of my co-workers also gets these errors, but another one does not. I suspect one of us might have done a merge incorrectly to cause this given that it's referring to the development folder in here while I'm trying to build the solution of the trunk.
I've checked and double checked all the dlls, and the two projects referenced here and neither of them are using the development folder, which I suspected might have caused this. I also did a clean brand new checkout of our trunk, and still got these errors. Then I tried deleting all the .NET temporary files to solve it, and still no luck. I did a google search for this issue and found a Microsoft hotfix for the problem which involved replacing a dll - but that was for Visual Studio 2003, and I'm using 2008. The dll in question on my computer is two full versions newer than the replacement version they list in the hotfix, so I'm not sure it'd be a good idea to replace what I've got with what's mentioned there.
Short of reinstalling Visual Studio and reformatting my computer, I'm out of ideas. Reinstalling might do it, but reformatting would be too much work just to fix this bug.
How can i convert an asp.net website as application in IIS?Are there set steps i need to follow? How can i do this?
View 24 RepliesI would like to understand if it is possible to convert a windows application project written in vb.net into an ASP.net website. I'm editing the code of a project, and I want to integrate the code into my WEBSITE written in vb.net I have a solution which when I open, it contains a class library and a windows application. There are only 3 files viewable under each of two folders. The folder Charlotte with Myproject, Assemblyinfo.vb and Charlotte.vb and the folder TestCharlotte with Myproject, AssemblyInfo.vb and frmTest.vb. How do I go about taking this thing and integrating the pages into my website application? WHen I look in the folders on my hard drive, I can see other things including a bin folder and an object folder.
View 4 RepliesI have a large application in Asp.Net 2.0.
How do i convert my application in different language..
Some google api is there but it provides me line by line convertion it will take long time to show page with different language.
way to use another language like Hindi,Gujarati,.
My question about I created a web site as a file system if I need to publish it what is the rules I follow.
View 2 Replies[URL]
In above web site,there is a drop down of "language" which convert the web site in various languages.How to create this type of drop down laungauge which can convert my web site in various Indian launguages.
When I build my program, if there's one error that prevents it from running, instead of just getting the one error I'll get around 50 additional errors in addition to the real one such as:
Error 27 Validation (XHTML 1.0 Transitional): This name contains uppercase characters, which is not allowed.
Is there any way to not show these?
I have a web application project that I have been working on for a long time now (about 7-8 months of work). I have been recently asked to convert it to web site project as boss wants the pages to be able to be updated independently instead of re-submitting the DLLs in BIN folder every time.
Is there a conventional step-by-step procedure to follow in order to do such conversion? Or create a web site project, copy all files, and hope that you will get less than 1000 errors?
I want to convert some contents of my website in some language I applied following procedure:
using System.Threading;
using System.Globalization;
public partial class Default2 : System.Web.UI.Page
{
protected override void InitializeCulture()
{
Thread.CurrentThread.CurrentCulture =
CultureInfo.CreateSpecificCulture("pa-IN");
Thread.CurrentThread.CurrentUICulture = new
CultureInfo("pa");
}
base.InitializeCulture();
}
I also add local resources and meta reference tag is appearing in source code of controls like label, textboxes on the page.
But desired language is not yet seen, it continues to appear in English Only.