When I build my program, if there's one error that prevents it from running, instead of just getting the one error I'll get around 50 additional errors in addition to the real one such as:
Error 27 Validation (XHTML 1.0 Transitional): This name contains uppercase characters, which is not allowed.
Is there any way to not show these?
I have a C# web forms ASP.NET 4.0 web application that uses Routing for URLs for some reason custom errors defined in the system.web section of my web.config is entirely ignored and it will fall back the IIS errors.
This gets entirely ignored
[code]....
This would be a minor inconvenience except that by the fact it falls back to IIS native instead of my application it completely circumvents Elmah logging my 404 exceptions correctly.
I just want to see error insteas of asp.net showing me default error Server Error in '/' Application. What should i change in web config?
mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors
I am trying to publish an MVC 2 site in Visual Studio 2010 on Windows Server 2008 R2.
As I read to do, I expand References and select:
- System.Web.MVC
- System.Web.Routing
- System.Web.Abstractions and set Copy Local to True.
Then I right click the MVC Web Project and select Publish. I select Publish Method of File System. This publishes to the local file directory I specified in a compiled down version. My first question is this: The MVC specific references whose Copy Local I set to true do not show up in the published bin file like I thought they were supposed to do. Now when I copy the files over to production it does not work.
For the top level [URL] I get: 403 - Forbidden: Access is denied. You do not have permission to view this directory or page using the credentials that you supplied.
For [URL] I get: 404 - File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
For [URL] I get: 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. Can someone point me to the right way to do this?
Last night i have ran my application which was workin 100%, but in the morning when i run it, it shows the error message in IE Status Bar Done but with some errors on Page due to this, my Menu and TreeView is not appearing well.
View 10 RepliesI have an application where I use the AJAX Tabpanel. It works 99 times out of 100. But sometimes a JavaScript error appears on the site saying that the Tabpanel cannot be found.
What I want is to check the site for JS errors and if JS errors appear then I will reload the site. In Pseudo-code:
Code:
If noJavaScriptErrorsAppear then
Ok
Else
reloadTheSite
Endif
Is that possible to implement in the serverside code e.g. in the page events?
I've developed a fairly simple web service which receives an xml string, validates it and passes it on to our internal database. This has been written to enable one of our clients to send us idocs from their SAP system. The trouble is that, although the web service works fine from a .net program, over the internet, the client's SAP system can't access it. They either get just an http 200 back (rather than the status code that the web service should supply) or they get http 500 'Internal Server Error'. I was wondering if anyone else has had issue's with ASP.NET web services from non 1qs`asp.net applications, or whether anyone can give me any advice on debugging http 500 errors.
View 4 RepliesI want to perform some simple form validation in my controller.
Here's an excerpt from the controller action:
[code]....
It appears that must use a string as the error's key. Is there a way i can generate the corect key from the model, or should I just check for what input name Html.PasswordFor(x => x.NewPassword) returns?
i have a website, i want to place the compile code on the production server, now i took the code on the local machine and trying to compile source code on local machine, but whenever i compile the code, in one of my control(ascx.cs) file i am getting error that the control does not exists in current context, i checked everything, Inherits, CodeFile, even in the code behind(.cs) file, everything is perfect, even i get the control id in the intellisense, when i remove the control and again add the same using intellisense, the errors gets removed but after i publish site, the same error comes again
View 2 RepliesWe are Running Windows 7 or Windows 2008 using integrated pipeline (not classic) and we are Getting 404 Errors when mixing MVC with Website and / or WebApplication ProjectsHowever, this problem doesn't exist when I run off the web server locally in visual studio, only when I use IIS 7.5. Is there anything special you need to configure in IIS 7.5 in order for website and webapplication projects to use MVC? I wouldn't think so, but when I run mvcapplication on IIS 7.5
View 21 RepliesI am currently using Server.CreateObject("MSXML2.ServerXMLHTTP.3.0") to get information via XML. The App was built connecting from Point A to Point B, with A & B being 2 servers in different locations. Through a cloud, we setup both locations on the same server with different hostheaders... Since this happened, we are getting an "invalid cert." error when we try and make the XML connection. I changed to code to invoke SXH_OPTION_IGNORE_SERVER_SSL_CERT_ERROR_FLAGS, but it was recently brought to my attention that this could in fact be invalidating the SSL, and the connection is no longer secure. Does anyone know if thats the case?
If so, is there typically a problem with 1 server establishing an SSL connection between itself? The certificate has remained the same (a wildcard cert. enabling *.mysite.com) just the physical location of the servers is what moved (And technically the version of IIS was upped to 7).
I'm using ELMAH to handle the exceptions in my ASP.Net MVC project. I would like to use it to log errors like database connection timeout, query connection timeout and others. Is this possible with ELMAH?
View 2 RepliesI get all the web errors from my website emailed to me. My job is to google the client ip address and check if it is a real error with the website, or if it is an error caused by mcafee secure (just from crawling the site). There is another type of error that I only have to worry about sometimes. That error, when I google the ip address, will come up as botsvsbrowsers. If it's a bot then I don't think it's of concern, but a browser is. My question is how am I to tell the difference. I also completely don't understand the whole concept of botsvsbrowsers ip in the first place. If it's a bot, then who or what caused the error?
View 5 RepliesI've just starting looking at a site in place at work. They're using Elmah to log errors.It seems to be logging fine, but in the web interface, when I tell Elmah to show me 100 errors per page, it only shows the most recent 15.Then when I click on "Download Log" I only get shown 15 errors in the CSV.Anyone know how I can configure it to keep all the errors?Or can someone point me to some docs on how to do this?
View 2 RepliesI have 2 lines in a text file like this
empid Name Salary Year
1234Johnny Wright 100002009
2344Travis Frank 302002009
For ex : my errors are in empid.. 2 empid's have alphabets which has error.
I m able to display only one error at a time. either 1st or 2nd.
How to display both errors at a time.?
I have written an ADO.net (with MS Access) script that should update one record and inserts another. However, when I run it can't seem to find the parameters and I get the familar 'no value give for one or more parameters' error. The values that I am converting into parameters are sessions (and they do exist since I print them out on the previous page).
Here's my code:
[Code]....
I'm using the suggestion from this question: How to get ELMAH to work with ASP.NET MVC [HandleError] attribute?I used Aziz's second code sample.I ran the debugger to see what happens when an error occurs. The main function in the HandleErrorAttribute class is:
public override void OnException(ExceptionContext context)
{
base.OnException(context);
[code]...
What would be the best way to catch exceptions and display a detailed message in ASP.NET? I know in regular windows development, you can use an MessageBox.Show(ex.Message) to display the error details. How is this possible in ASP.NET? Is there an example out there someone could direct me to? I have not been able to find anything yet.
View 3 RepliesI have setup an MVC application to log errors with log4net. In my global.asax I catch Application errors using the Application_Error method (s_log is my logging manager which is a wrapper around Log4net).
protected void Application_Error(Object sender, EventArgs e)
{
Exception ex = Server.GetLastError().GetBaseException();
s_log.LogException(true, ex, "Application Error");
}
When customErrors is set to "Off" I get the yellow screen of death and can see the error in my log file. When customErrors is set to "On" I see my Error page (and the detailed error) but nothing is written in the log file (debugging doesn't hit the Application_Error).
Error.aspx
<h1>Sorry, an error occurred while processing your request.</h1>
<strong>Controller: </strong> <%= Model.ControllerName %><br />
<strong>Action: </strong> <%= Model.ActionName %>[code]....
I have an error I haven't seen before. One minuter the debugging works fine, the next a App_Web_olwtcupi.4.cs opens in Visual Web Developer (2008) with the following code marked:
[Code]....
I don't know what I did, I've only written code in my aspx and aspx.cs files and I've never seen this before. This is not the first time I use Visual Web Developer, asp.net or c# and I'm truly puzzled..
I ve got a Problem with a Webservice. I've Scripted it in VB.net -- I have read that i have to Import System.Web.Script.Services.
My Problem is, that I have to Use .net 2.0 for my Webservice because this Service has to be integrated in another Service.
Code:
Imports System.Web.Services
Imports System.Web.Services.Protocols
Imports System.ComponentModel
[code]...
Now when I Call this Webservice with my *.asmx File I get the following
Code:
ErrorSystem.InvalidOperationException: RetrieveSCCMPKG Web Service method name is not valid.
at System.Web.Services.Protocols.HttpServerProtocol.Initialize()
at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response)
at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)
I have Changed the Webservice and also the Webconfig but I don't know what setting is false.
I am new to the whole ajax/jquery/web service scene. I am trying to create a web service to pass back data for a jquery post and currently have two errors. It appears there are examples the web but must in c and looking for something in vb. Below is my web service. See in bold the error descriptions and in red the items visual studio is highlighting.
WordsService.asmx
HTML Code:
<%@ WebService Language="VB" CodeBehind="~/App_Code/WordsService.vb" Class="WordsService" %>
WordsService.vb
Code:
Imports System.Web
Imports System.Web.Services
Imports System.Web.Services.Protocols
Imports System.Runtime.Remoting.Services
Imports System.Collections.Generic
Imports System.Data.SqlClient
Imports System.Data
Imports System.Web.Script.Serialization
' To allow this Web Service to be called from script, using ASP.NET AJAX, uncomment the following line.
<System.Web.Script.Services.ScriptService()> _
<WebService(Namespace:="[URL]
<WebServiceBinding(ConformsTo:=WsiProfiles.BasicProfile1_1)> _
<Global.Microsoft.VisualBasic.CompilerServices.DesignerGenerated()> _
Public Class WordsService
Inherits System.Web.Services.WebService
Private _sConn As String = ConfigurationManager.ConnectionStrings("DB").ConnectionString
'1) Type 'ScriptMethod' is not defined.
'2) Value of type '1-dimensional array of String' cannot be converted to '1-dimensional array of 1-dimensional array of String' because 'String' is not derived from '1-dimensional array of String'.
<WebMethod(Description:="Gets the books matching part of a title."),
ScriptMethod(ResponseFormat:=ResponseFormat.Json)> _
Public Function GetBooksByTitle(ByVal strTitle As String) As String
Dim myConnection As SqlConnection = New SqlConnection(_sConn)
Dim objCommand As SqlCommand = New SqlCommand("SELECT * FROM table WHERE field like '%" _
+ (strTitle + "&' ORDER BY field;"))
Dim dsSearch As DataSet = New DataSet
Dim sdaSearch As SqlDataAdapter = New SqlDataAdapter(objCommand)
sdaSearch.Fill(dsSearch, "english")
myConnection.Close()
' Create a multidimensional jagged array
Dim JaggedArray()() As String = New String((dsSearch.Tables(0).Rows.Count) - 1) {}
Dim i As Integer = 0
For Each rs As DataRow In dsSearch.Tables(0).Rows
JaggedArray(i) = New String() {rs("BookNum").ToString, rs("Title").ToString, rs("Author").ToString}
i = (i + 1)
Next
' Return JSON data
Dim js As JavaScriptSerializer = New JavaScriptSerializer
Dim strJSON As String = js.Serialize(JaggedArray)
Return strJSON
End Function
End Class
Here is the article I am currently following for example: How To Create A JSON Web Service In ASP.NET.
My site is running through Windows Server Standard, from where i can found 404 errors that are generating on site. I already checked Windows Logs --> Application but could not find them.
View 2 RepliesI tried to follow the example here: [URL] I pointed my .aspx page to Northwind > Employees, because that table already has a field for pictures, and a few data points, so I thought it would make sense to use that. I followed the instructions and set my DataImageUrlField to ProfilePicture. I'm not sure where the images go, or even where 'ProfilePicture' goes, so I created a new folder in my project and named the folder 'ProfilePicture' and put the pictures in there. So, now I have this kind of setup: C:Documents and SettingsThinkPadDesktopWebSite1Profile_Pictureimage1.jpg
Then I loaded the page and all data loads into the DatGrid fine, except for the images. So I copy/paste the code into 'Default.aspx.vb' and I debug and get this error: Compilation Error Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately. Compiler Error Message: ASPNET: Make sure that the class defined in this code file matches the 'inherits' attribute, and that it extends the correct base class (e.g. Page or UserControl)............
Im using the following code:
[code]....
To return a partial view and a form through JSON. It works as it should, but as soon as I get modelstate errors my ValidationSummary does not show. The JSON only return the default form but it does not highlight the validation errors or show the validation summary.
Am I missing something?
This is how I call the RenderPartialToString:
string partialView = RenderPartialToString(this.ControllerContext, "~/Areas/User/Views/Account/ChangeAccountDetails.ascx", new ViewDataDictionary(avd), new TempDataDictionary());