Application Hosted On IIS7 That Is Ignoring Custom Errors And Falls Back To IIS Errors?

Jul 2, 2010

I have a C# web forms ASP.NET 4.0 web application that uses Routing for URLs for some reason custom errors defined in the system.web section of my web.config is entirely ignored and it will fall back the IIS errors.

This gets entirely ignored

[code]....

This would be a minor inconvenience except that by the fact it falls back to IIS native instead of my application it completely circumvents Elmah logging my 404 exceptions correctly.

View 3 Replies


Similar Messages:

Errors Running .NET 1.1 On IIS7 (applicationHost.config)?

Jan 11, 2011

I am trying to port an existing ASP.Net 1.1 website to another web server that currently runs IIS7 and a number of websites that target either .Net 2.0, 3.5 or 4.0. All other sites continue to work perfectly. Unfortunately, I can only browse static files on the newly imported site. If I try to access any of the Features in IIS7 for the new sit

View 1 Replies

MVC :: Sending Errors Back To View From Model?

Mar 26, 2010

Suppose i have an insert function in my model like so:

//INSERT
public int? Insert(DataLayer.PersonRow row)
{

[code]...

View 2 Replies

Eliminating Errors That Aren't Really Errors?

Dec 21, 2010

When I build my program, if there's one error that prevents it from running, instead of just getting the one error I'll get around 50 additional errors in addition to the real one such as:

Error 27 Validation (XHTML 1.0 Transitional): This name contains uppercase characters, which is not allowed.

Is there any way to not show these?

View 2 Replies

Web Forms :: Handle Custom Errors Using Custom Error Page?

May 7, 2015

I want put custom error page in my website so I wrote below code in web.config

<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>

is it correct?

or I should put other code?

View 1 Replies

ASP.NET - Use Tracing To Capture Errors And Send Report Back To ADMIN?

Jul 9, 2010

I wanted to use tracing to capture errors and programmatically send reports via email and text message...that if the ADMIN is eating out at a restaurant on a saturday nite he can see the text message/email to notify and capture..any way to do this??

View 1 Replies

Getting Redirection To Custom Error Page Using Custom Errors

Mar 24, 2010

Here's my Application_OnError event sink in global.asax.vb:

Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub

You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'

Here's the relevant web.config entry:

<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>

So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.

We've also tried this:

Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub

Which unsuprisingly doesn't work either.

View 1 Replies

Custom Errors Only Working With File Name?

Dec 3, 2010

[Code]....

Custom errors only working with file name

View 2 Replies

Redirecting To Custom Errors Page?

Mar 18, 2011

if I am redirecting to an error page from global.asax file, can I get hold of the page in which the error had originally occurred?

View 3 Replies

Custom Errors Not Working / 404 Page Not Found - How To Fix It

Mar 16, 2010

I'm trying to set up custom errors for asp.net in webconfig/global.asax on Server 2003, IIS 6. Got it working find for .aspx pages but not for any htm or html pages. So I found the article describing how to open IIS manager, click configuration, copy path for .aspx extension and add one for .htm Did that.

Restarted website: Now I get the blank white page explaining there's a problem but not the 404 page not found

Restarted web services: same thing

View 5 Replies

Disable Custom Errors Only For A Specific IP Address?

Oct 12, 2010

how to disable asp.net custom errors only for a specific ip address? this will ease debugging exceptions on my server from my office..

View 2 Replies

How To Use Custom Errors Page In Windows Authentication

Mar 18, 2011

I am using asp.net 3.5 web.config to limit access and it works great.

<authentication mode="Windows">
<authorization>
<allow users="Bill, John"/>
<deny users="*"/>
</authorization>

Unauthorized (but authenticated) users will be blocked by a system error message saying that:

Server Error in '/' Application Access is denied.

Description: An error occurred while Error message 401.2: Unauthorized: Logon failed due to server configuration.

In order to make the message more friendly, I uncomment the customErrors flag and create a GenericErrorPage.htm in the root path of my project.

<customErrors mode="On" defaultRedirect="GenericErrorPage.htm">
<error statusCode="403" redirect="NoAccess.htm" />
<error statusCode="404" redirect="FileNotFound.htm" />
</customErrors>

However, it just doesn't work. I still get the system error message rather than my custom error page.

View 1 Replies

Web Forms :: Custom Errors Tag Should Then Have Its Mode Attribute Set To Off

Jun 12, 2012

To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".

I got this error at time of  running ma published website  but only for 1page this error occurred how it can be solved.

View 1 Replies

C#. : Custom Validator (ValueToCompare & ControlToValidate Property Errors) / How To Fix It

Jun 22, 2010

I've searched a fair bit round and tried a number of potential solutions, suggested on their respective threads on various sites, to which none have worked for me.

My objective is to make sure the date entered, and to be stored, is not 'less than' (before) the present datei.e. Booking a reservation for a restaurant.

The first is:

"The ControlToValidate property of 'cvDate' cannot be blank..."

I've tried specifying it in page_load and .aspx source, the same has happened in both, in addition to ValueToCompare. I cant understand why it cant detect it?

C# (ControltoValidate):

Csharp Code:

[code]....

View 5 Replies

No Build Errors But Only Custom Error Page Shows?

Jul 8, 2010

I am a more than a little confussled, my build succeeds with no errors but when I run without debugging only my error page shows up? I tried switching the custom errors to "Off" but it still shows up the error page.

View 5 Replies

Configuration :: Custom Errors For 404 Pages Not Working In Web.config?

Feb 2, 2010

For some reason the Custom Errors for 404 pages are not working on my production server, but they work fine on development. Instead of going to the custom 404.aspx page, it goes to the ugly IIS 404 page.

Here is my Custom Errors protion of my web.config:

[Code]....

I changed the defaultRedirect to also go to my 404.aspx page just to make sure I was catching everything, but still it does't work. I know I could change the IIS 404 error to also point to my 404.aspx page, but that will not work for me because I need to capture the "aspxerrorpath" in the querystring for .net 404 errors. The IIS method will not give me that.

I am just hoping it is a server configuration I missed somewhere, but everything on production looks the same as on development.

View 9 Replies

Log Application Errors When CustomErros Is Set To On?

Nov 27, 2010

I have setup an MVC application to log errors with log4net. In my global.asax I catch Application errors using the Application_Error method (s_log is my logging manager which is a wrapper around Log4net).

protected void Application_Error(Object sender, EventArgs e)
{
Exception ex = Server.GetLastError().GetBaseException();
s_log.LogException(true, ex, "Application Error");
}

When customErrors is set to "Off" I get the yellow screen of death and can see the error in my log file. When customErrors is set to "On" I see my Error page (and the detailed error) but nothing is written in the log file (debugging doesn't hit the Application_Error).

Error.aspx

<h1>Sorry, an error occurred while processing your request.</h1>
<strong>Controller: </strong> <%= Model.ControllerName %><br />
<strong>Action: </strong> <%= Model.ActionName %>[code]....

View 2 Replies

C# - Does Custom Errors Override The Actual HTTP Response Code

Mar 28, 2011

If I were to specify a page for redirect using the ASP.NET Custom Errors feature, would my application still spit out the HTTP status code for that particular error?

For example if had a line in my web.config that had all Internal Server Errors redirect to Errors/500.aspx and then I encountered a 500 error, I would then be redirected to my custom Errors/500.aspx page. Will my application still respond with a HTTP 500 at any point in this exchange?

View 1 Replies

C# - Errors When Creating Custom Querable Object With MVC And Subsonic Pagedlist

Jun 8, 2010

I have the following code but when i try and create a new IQuerable i get an error that the interface cannot be implemented, if i take away the new i get a not implemented exception, have had to jump back and work on some old ASP classic sites for past month and for the life of me i can not wake my brain up into C# mode. The code is to create a list of priceItems, but instead of a categoryID (int) i am going to be showing the name as string.

public ActionResult ViewPriceItems(int? page)
{
var crm = 0;
page = GetPage(page);
// try and create items2
IQueryable<ViewPriceItemsModel> items2 = new IQueryable<ViewPriceItemsModel>();
// the data to be paged,but unmodified
var olditems = PriceItem.All().OrderBy(x => x.PriceItemID);
foreach (var item in olditems)
{
// set category as the name not the ID for easier reading
items2.Concat(new [] {new ViewPriceItemsModel {ID = item.PriceItemID,
Name = item.PriceItem_Name,
Category = PriceCategory.SingleOrDefault(
x => x.PriceCategoryID == item.PriceItem_PriceCategory_ID).PriceCategory_Name,
Display = item.PriceItems_DisplayMethod}});
}
crm = olditems.Count() / MaxResultsPerPage;
ViewData["numtpages"] = crm;
ViewData["curtpage"] = page + 1;
// return a paged result set
return View(new PagedList<ViewPriceItemsModel>(items2, page ?? 0, MaxResultsPerPage));
}

View 2 Replies

C# - Compile Errors On Deployed Web Application, But Not In The IDE?

Dec 30, 2010

In my deployed web application I am getting the following error:

CS0103: The name 'releaseLionButton_Click' does
not exist in the current context

It identifies this as the offending line:

<asp:Button ID="releaseLionButton" runat="server"
Text="Release the Lion!"
OnClick="releaseLionButton_Click"></asp:Button>

[code]...

View 2 Replies

Handle Errors At Application Or Server Level?

Sep 28, 2010

When setting up asp.net error handlers for things like 404 errors, it is more 'efficient' to do this in IIS, or handle it in the Global.asax Application_Error event? I know the latter will be called, and I want to log this information in a database, but should I then just return without any redirect and let IIS do the redirect, or would it be better to do a response.redirect inside application_error once we've logged it?

View 1 Replies

Redirect - Custom Errors With Mode=remoteOnly And Global.asax Handling Exceptions?

Jul 19, 2010

I have custom errors set in the web config file as follows:

<customErrors mode="RemoteOnly" defaultRedirect="GenericError.aspx" />

Fine and dandy... I like that mode="RemoteOnly" facilitates development...

For unhandled exceptions, I have in global.asax:

Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
Response.Redirect("GenericError.aspx")
End Sub

However, unhandled exceptions are going to the generic error page instead of the informative yellow screen of death preferred by developers. I can comment out the redirect in global.asax, but then I need to remember to change it for the production environment. Is there a way I can check in Application_Error whether I am remote or not to determine whether to redirect?

View 2 Replies

Configuration :: First Time Deploying A .Net Application, Get Compile Errors?

Mar 11, 2011

I am using TFS to build my MVC app. I cannot do it because I get lots of compile errors. I am using version 4 of .Net and MVC 2. On the build server I have the .Net framework 4.0 installed. It has been suggested that I should also download the MVC framework as well, but when I look on the net all I can find is this MVC framework; http://mvcframework.codeplex.com/ which does not seem to be relevant and does not work anyway.

One of the assemblies I am missing on the build server is System.Web.Mvc dll.Typical error messages include; "The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)"What do I need to do to fix this?

View 2 Replies

Report Model State And Application Errors To Client?

Mar 2, 2011

I'm wondering what the best practice is in reporting back to the browser about application or model state errors that would be displayed to the user. Can you throw an exception and handle it in the error handler of the jquery post? For example, consider this method:

[HandlerErrorWithAjaxFilter, HttpPost]
public ActionResult RetrievePassword(string email)
{
User user = _userRepository.GetByEmail(email);
if (user == null)
throw new ClientException("The email you entered does not exist in our system. Please enter the email address you used to sign up.");
string randomString = SecurityHelper.GenerateRandomString();
user.Password = SecurityHelper.GetMD5Bytes(randomString);
_userRepository.Save();
EmailHelper.SendPasswordByEmail(randomString);
if (Request.IsAjaxRequest())
return Json(new JsonAuth { Success = true, Message = "Your password was reset successfully. We've emailed you your new password.", ReturnUrl = "/Home/" });
else
return View();
}

Is it correct to throw an exception in this case when the user is null? Or should I instead do this and handle it in the success handler of the jquery post: return Json(new JsonAuth { Success = false, Message = "The email you entered does not exist in our system. Please enter the email address you used to sign up.", ReturnUrl = "/Home/" });

View 1 Replies

C# - Email Only Errors / Warnings With Microsoft Logging Application Block 3.1.0.0?

Jul 27, 2010

I'm trying to configure the logging settings to log all events in a database and event viewer but email only errors and warnings. Database and Event Viewer part works fine except that I'm not getting any email for errors.

Note: There isn't any problem with smtp settings because I get event's emails if I add the listener to "General" and "All events" in category sources.

Here is my config: (I'm using Microsoft.Practices.EnterpriseLibrary.Logging 3.1.0.0)

<loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="General" logWarningsWhenNoCategoriesMatch="false">
<listeners>
<add databaseInstanceName="LOGGING_DB" writeLogStoredProcName="WriteLog"

[Code]....

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved