ADO.NET :: Error - Timeout Expires For Dynamic Query
Jan 28, 2011I am using dynamic query to get data from database (SQL) Whenever the query execution time is more than 1 min, i get a Timeout expiry error in my web page.
View 6 Replies
Similar Messages:
State Management :: Session Expires After Every 4 - 5 Minutes - Increase Idle Timeout
Mar 3, 2011I'm facing a great problem in session. My session expires after every 4-5 minutes. Firstly I checked my web hosting settings. I increased session timeout to 50000. In my web.config I wrote :
[Code]....
Also Locally it expires withing 5 minutes. Secondly can I also increase idle timeout.
State Management :: How To Control Session Timeout / Get Or Set Session Timeout Dynamic
Mar 9, 2011I wanna write a method to get or set session timeout at run time.
View 1 RepliesSQL Server :: Connection To Database Expires Causing An Error?
Aug 9, 2010I have an asp.net web page which works with a database. When I first upload it I never disposed the connections so after using the different modules of the application for sometime it would suddenly stop working saying the connection pool filled or something like that.To fix it when a user clicked a button I opened the connection, tell the database what I needed and finally disposed the connection.
This seemed to fix everything, in fact you can work with application all you want, the problem comes if you stop using it for certain time.So for instance, I have a module in my webpage where user can capture information for a certain product. When the user clicks in one button the info gets into the database. If the user is continuosly capturing data everything works fine, but if it goes for about 10 min when he clicks the button he will receive an error. To fix this the user has to log-in again.
Every module opens a connection to the database to verify the user identity, but then after it verifies it I dispose the connection so I don't think there is a problem.
DataSource Controls :: SqlDataSource And Parameters Query / Trying To Accomplish Is Building Dynamic Query
Aug 22, 20101. I have a GridView on my page and it uses sqldatasource with parameterized query. What I want to do is, on page load (where nothing has been selected so no parameter supplied), I want it to query everything (something like SELECT * FROM [this_table]) but since my SelectCommand is something like
SELECT * FROM [this_table] WHERE [this_column] = @someParameters AND [that_column] = @someParameters.
Can I play around with default value to achieve something like that but how ? Now, when the page loads, it doesn't show anything (No Gridview).
2. On my page, I made something like (username, gender, address, and more) and one single search button. That means, no single control enable auto postback. What I am trying to accomplish is building dynamic query
(if username specifed -> SELECT * FROM [this_table] WHERE [username] LIKE @username).
If both username and gender are specified (SELECT * FROM [this_table] WHERE [username] LIKE @username AND [gender] = @gender) and you know the rest. How can I do this using GridView and SqlDataSource ? To my knowledge, I can only specify one SELECT statement in a sqldatasource.
SQL Timeout Expired For 2 Second Query?
Dec 15, 2010The problem is I have a stored procedure that runs consistently in Sql Server Management Server with a time of 2 seconds but when calling that same stored procedure from code it times out.
When it runs correctly from SSMS it should return about 30 rows.
I've tried a few different ways to call the procedure from code but every time the same result. This just recently started happening, yesterday it was working fine.
The preferred method for calling the procedure for us is using Linq2Sql which gives the following error message:
[code]....
State Management :: Form Timeout Vs. Session Timeout Vs. Connectionstrings Timeout?
Jan 27, 2011We have the timeout value set to 120 in our <form> tag within the web.config. We do not have a session timeout set.. and we have various connection strings.
We are having a problem where a session variable will disappear (become NULL) .. but, the form evidently remains 'open'.. or no re-login is required..... so, my question(s):
1. what is the relationship between form timeout and session timeout
2. how do I set session timeout
AJAX :: JScript Runtime Error 12030 From Ajax Timer When Authorization Expires?
Nov 3, 2010I have an ASP.NET form with several update panels. All works great.I use a timer and have it handle some periodic upates. That works correctly too. However, I appear to get an error when I leave the page open running in the debugger. Specifically the above JScript error 12030.I'm not clear how to find the source but I assume it is because my page has logged out. If I refresh I go back to my login page.So, does this sound like the cause? If so, how to I address this?
View 2 RepliesSQL Server :: Getting Timeout Error On SQLBulkCopy?
Nov 8, 2010Using sql server 2005 and vb.net 2005.I'm creating a .net console application where I am doing a SqlBulkCopy from a non-sql server db to a sql server db table and on the call for the bulk insert:
[Code]....
I'm getting a time out error after around 1 minute, however I set BulkCopyTimeout (see above) to 100 minutes, the error:
<ERROR>
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
</ERROR>
Has anyone experienced this and how to fix this or how do I change the timeout so I dont get this error?
Page Reload After TimeOut Error?
Jul 6, 2010I have a Web app using Forms authentication. I Use Timeout in Web.Config to TimeOut from application that is working fine and I am Redirected to Login page with Message on page "The application timed out. Please ClockIn/Login." When I am Logging again I am Redirected to the same page with same error message and after that if I try Logging again second time I am able to Login.
Following is the code from different form which i am using.
Web.Config
<sessionState timeout="2">
</sessionState>
<authentication mode="Forms">
<forms loginUrl="Login.aspx" protection="All" timeout="2" slidingExpiration="true" defaultUrl="Home.aspx">
</forms>
[Code].....
VS 2008 Timeout Exception - Webservice Running Query On Sql Server 2008?
Jun 24, 2010I have a web service that runs a query (from C#) to get a dataset from sql server. I get the following time out error. Googling on this error says, you can set the timeout on command object. But I am not using command object to set the timeout. This is the code I am using to get the dataset.
code:
[code]....
DataSource Controls :: SQL TimeOut Error And NVarChar (Max)?
Feb 22, 2010On one of our applications we are getting a timeout error on an 'additional details' field in our database, the field type is nVarChar(MAX).
The error seems to be happening when a user enters more than 4000 characters into the additional details field. It is my understanding that this fieldtype can store up to 8gb of data and should be used in stead of the "Text" field type?
We have since limited the user from entering more than 4000 characters via the application, however the DB still contains legacy data - when the 'additional details' with more than 4000 characters is pulled out - "Timeout Error".
ADO.NET :: Error - The Timeout Period Elapsed Prior To Completion
Aug 30, 2010I'm using ASP.NET 3.5 (c#) with SQL Server 2008 server. Recently, I started getting error "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.".
After looking at forums for solutions, I added the below common code to my application.
[Code]....
However, intermittently, I'm still getting the timeout error. I added the logging to see where error is occuring. And found that before executing one of the query, it is giving this error. Now, my assumption is that I should have received this error after runnign query for 600 seconds (10 minutes) since I set it in the above function. But the timeout error is occuring instantaneously within 1 second itself. In the log, I printed one line above & after the query to identify how much time it would take. Surprisingly, the log says that 9:00 AM "Before query execution" & at 9:01 AM "timeout expired...."
SQL Reporting :: Getting Timeout Expired Error In Local Reports?
Oct 1, 2010I am using local reports(rdlc) fils for reports generation in asp.net I am getting timeout expired error when i have more number of records. I am able to view the preview if there is less number of records. I have also added following code in by Submit button. I have tried by giving Connect TimeOut=3600 in Web.confing file at Connection. But not worked. I am using stored procedure to get the records and it was executed with in 3 secs. Very urgent give me any solution.I have also tried by adding following code also.da.SelectCommand.CommandTimeout = 0
View 4 RepliesIs It Possible With Dynamic TSQL Query
Jun 3, 2010I have very long select query which i need to filter based on some params, i'm trying to avoid having different stored procedures or if statements inside of single stored procedure by using partly dynamic TSQL.I will avoid long select just for example sake
select a
from b
where c=@c
or d=@d
@c and @d are filter params, only one can filter at the same time but also both filters could be disabled. 0 for each of these means param is disables so i can create nvarchar with where statement in it...
How do i integrate in here dynamic query so 'where' can be added to normal query. I cannot add all the query as big nvarchar because there is too many things in it which will require changes ( ie. when's, subqueries, joins)
WCF / ASMX :: Timeout Error Handling - Data Large To Fetch
Jun 8, 2010My problem is I have handled timeout error in client of WCF error in such a way that if data is large to fetch, after 10 minutes(as all timeout in web config of client are set to 10 minutes) it should show me customize message 'Too many records to fetch, please modify criteria'. It works on my local system as per expected but if I put it in test server(Service is in one test server and Client application in one test server) it gives me following runtime error.
The message could not be processed. This is most likely because the action [URL] is incorrect or because the message contains an invalid or expired security context token or because there is a mismatch between bindings. The security context token would be invalid if the service aborted the channel due to inactivity. To prevent the service from aborting idle sessions prematurely increase the Receive timeout on the service endpoint's binding. The thing is if I set SendTimeout in test server client config less than 20 seconds then it works fine but we should not be limited upto 20 seconds as it is awfully short.
Configuration :: The Remote Server Returned An Error: (408) Request Timeout?
Aug 9, 2010I move a file from server to another server .in local it is woking fine .but in production it is getting error
The remote server returned an error: (408) Request Timeout.
i used like this ..
objWebClient.UploadFile(ClientLocation,
"POST", fileName.ToString());
Big ViewState Content Result A HTTP Error 504 - Gateway Timeout?
Nov 16, 2010I have one asp.net page which seems to return a very big content (5,648,733 bytes and that is mostly consumed by VIEWSTATE) ending with a 504 Gateway timeout error. I am tracking the http request/response by using Fiddler.
And basically, when I post-back the same page -by clicking a button- the post-back fails with thoose errors shown in IE and in FF:
Internet Explorer cannot display the webpage --> in IE
The connection to the server was reset while the page was loading. --> in FF
Question: Can this be because of the big size injected in VIEWSTATE; and if yes, what is the main
reason so that it loads the page but cannot post the page back after?
DataSource Controls :: SQL Statement Timeout / System.Data.SqlClient.SqlException: Timeout Expired?
Jan 20, 2010Hopefully I am posting this in the correct forum.
I am having a problem with my ASP.Net Web application. The application is developed using vb.net and is linked to a SQL Server database. Let me explain how the application works and the problem I am experiencing. The system is an online web app which allows registered users to create a CV online. One of the pages within the app gives users the chance to add a cover note to their CV. The page that allows them to do this consists of only a textarea control and a button control. The textarea allows users to input up to 4,000 characters.
Once the user clicks the 'Save' button to save their cover note info, the following code then executes.This code checks to see if the CV already has cover note info, if it does, then the application runs an update statement, otherwise, it runs an insert statement.The table within the database which records the cover note information is called tbl_covernote and has three columns, covernote_id (int and autoincrement), cv_id(int), covernote_text (nvarchar(max)).
The error which occurs sometimes is as follows:
Dim dr As SqlDataReader
Dim param(0) As SqlParameter
Finally [code]...
AJAX Timeout Although Request Is Completing Long Before Timeout Duration
Feb 15, 2010I have an ASP.Net application that makes an AJAX request to retrieve at report. The report can run for a long time so I set the asyncpostbacktimeout in <asp:ScriptManager /> to 600. However, when I try to run the report, if it runs for longer than 90 seconds it fails to come back. I can see in the IIS logs that the POST request succeeded with a 200 status and I can see the time taken is much less than 600.
The web page dutifully waits for the entire 600 seconds before returning with a timeout error:
Error:
Sys.WebForms.PageRequestManagerTimeoutException:
The server request timed out.
Is there any setting I should be checking in IIS? Connection timeout is 900 seconds.
DataSource Controls :: Compile In Order To Get The System.Linq.Dynamic Namespace / Dynamic Linq Error
Apr 20, 2010I've added the Dynamic.cs file to my project and have set it's Build Action = Compile in order to get the System.Linq.Dynamic namespace.
However, when I try to use any of the new code I am getting an ambiguous call error; see below.
[Code]....
Include Dynamic URL In My URL Without Using Query String?
Jan 18, 2010ASP.NET 3.5, IIS7,In my Global.asax's Application_BeginRequest, I need to extract from the request's URL an entirely seperate URL that's been embedded in it without using query string.
The solution I came up with was to hex-encode the entire target URL as if it were a directory, as follows:
http://localhost/687474703A...etc...732E6D7033/irrelevantFilename.txt
This fails for IIS7, whose ASP.NET implementation won't tolerate a URL path greater than 260 characters.My code controls how the request URL gets generated, and how it might embed the target URL in there, but it doesn't have any control over that target URL value (they're third-party URLs).How better could I embed this target URL in my request URL?
ADO.NET :: Query Dynamic Table In LINQ?
Jan 17, 2011I have a table created on the fly. The table structure is dynamic.
This is the table structure generated by the end of year 2010
DealerCode, 201010, 201011, 201012
This is the table structure generated by the end of Jan 2011
DealerCode, 201011, 201012, 201101
What I need to do is selecting all data and then bind it into a gridview
To build a LINQ query, we need to drag the table into dbml file first. As we don't know how the table look like, can we add it in dynamically? Are there any other solutions?
ADO.NET :: Dynamic Table Name Linq-to-sql Query?
Sep 20, 2010I am writing a function in which i generate autocode in specific format i want to make this function generalize so that i send tablename and columnname parameter and function return the next code. I am using linq to sql with MVC e.g. i want to make table name and column name dyanamic
[Code]....
C# String Manipulation For Dynamic Query
Aug 18, 2010I have a string
it contains can contains either of (1) strQuery = "TempTable.Group_No IN ()";
(2) strQuery = "TempTable.Group_No IN (1,2,3,4,....)";
My task is if it contains "TempTable.Group_No IN ()", (i.e) IN CLAUSE without data i have to replace the string (IN() with IN (NULL)) with "TempTable.Group_No IN (NULL)"