ADO.NET :: Use Parameters With A Programmatically Created SQL Statement?
Dec 6, 2010
I have an internal web search on my website. Previous, it has been used to search by our partnumber only. This was nice and easy
SELECT * FROM View_ProductRange WHERE PartNumber LIKE '%'+ @Search +'%'
I have now built an internal search.
[Code]....
However, I can't use paramaters because the paramaters appear to be 'applied' after the SQL statement has been built, so it would only add the final word the customer searched for due to the paramater taking the final variable at the end of the Foreach Loop. e.g.
[Code]....
Is there 1) a better way to search and 2) a safer option/method/approach.
FYI, at the moment I have
strSearch = strSearch.Replace("'", " ");
strSearch = strSearch.Replace("drop", " ");
strSearch = strSearch.Replace("table", " ");
strSearch = strSearch.Replace("Insert", " ");
strSearch = strSearch.Replace("amend", " ");
strSearch = strSearch.Replace("apend", " ");
strSearch = strSearch.Replace("delete", " ");
strSearch = strSearch.Replace(""", " ");
strSearch = strSearch.Replace("--", " ");
strSearch = strSearch.Replace(""", " ");
but I don't like that (there is a ToLower() method used)!
View 3 Replies
Similar Messages:
Jun 8, 2010
In C# and MVS2008, how do I do an equivalent of window.open() programatically from within the C# code (so not attaching JavaScript code to a button).
Is it possible to specify settings such as width, height, no scroll-bar, etc.?
Now I can open a new page by using Server.Transfer or Response.Redirect, but I can not seem to specify the new pages width, height, etc.
View 6 Replies
Aug 26, 2010
There it is written that controls should be added in Init event rather than Load event for the added controls to participate in the Postback data processing.But whose Init or Load event ? Page's Init or the containing container's Init event?
View 3 Replies
Sep 8, 2010
This works great for 1 parameter
SqlDataSource1.SelectParameters("City").DefaultValue = Me.Page.Title
But I can't figure out how to pass in two parameters in a single statement (See the Select Parameters Below) Two paremeters (City, and Classification) If I set the page title to say "Bismark Charters" Bismark = City & Charters = Classification
[Code]...
</SelectParameters >
View 4 Replies
Oct 21, 2010
I want to programticaly set DPI and allow user to scan document only not allowed to save it also.
View 2 Replies
Jan 9, 2010
I am using Javascript to create dynamic controls on the page I am not dealing with File Uploads, just creating custom field things.
I think I need to override SaveViewState and LoadViewState events to keep my controls in the ViewState.
View 4 Replies
May 13, 2010
Say I am creating a Textbox in the codebehind of a page like this:
protected override void OnInit(EventArgs e)
{
base.OnInit(e);
TextBox test = new TextBox();
test.SkinkId = "MySkin";
placeHolder.Controls.Add(test);
}
and in my skin file I have this:
<asp:TextBox
runat="server"
SkinId = "MySkin"
Width="400"
/>
Why is the skin not beeing applied to the control. If i declare the control in my aspx page it works ok, but if I try to do it programatically it does not work...
View 2 Replies
Mar 24, 2010
Is it possible to access the html markup of programmatically created controls, and if so, how?
In c# you can write things like:
[code]...
View 2 Replies
Mar 15, 2010
I am creating a LinkButton programmatically and render its HTML output into a Literal control:
[Code]....
The LinkButton appears in the page output, but is not rendered clickable. In the output HTML, the result looks like:
[Code]....
View 9 Replies
Jan 25, 2012
I need to generate a button way after the page loads but I can't work out how to deal with the Event handler. If I do this when the page loads as shown bellow it works as intended but if I use the exact same method in a button it fails. (it creates the button but when I click the button it just disappears instead of showing a msgbox."I know I shouldn't use Msgbox in a web form but I only do it as a test then remove it"
Code:
Partial Class Default3
Inherits System.Web.UI.Page
Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load
Dim mybutton As Button
mybutton = New Button
mybutton.Text = "Submit"
[code]...
View 1 Replies
Sep 21, 2010
I have a form that does a loop to create checkboxes. Here is the code in the loop:
LeftPosition+=120;
cbxDrives.Top = TopPosition;
cbxDrives.Left = LeftPosition;
cbxDrives.Text = d.Name;
CheckBox cbxDrives =
new
CheckBox();this.Controls.Add(cbxDrives);
This creates multiple check boxes on the form, and this works fine.
However, in the code behind for my button that the user clicks to execute the form, I cannot figure how how to read the values for the checkboxes. I've tried:
foreach (CheckBox cbxDrive
in cbxDrives)
{
}
but cbxDrives is not recognized.
I need to read through all of the checkboxes to see their values, so that the appropriate actions can be performed in the code behind.
View 7 Replies
Apr 1, 2011
I have a page called Page2.aspx and it is called by another page called Page1.aspx and Page1.aspx passes two parameters namely: Name and Category to Page2.aspx. Does anyone know why the following code from Page2.aspx is not working and it keeps giving an error message as follows: " You have declare the parameter @Username".
string Cat1;
string Name1;
[Code]....
View 2 Replies
Mar 21, 2010
I'm trying to manually create a button and add a Click event handler for it in code. However when the button is clicked the event handler doesn't seem to react on event (or event isn't called).
we tested the code in Visual Studio 2008 and everything worked just as it should. And I'm using Visual Web Developer 2005 XE. So I assume that I'm missing something to be done manually being in VWD 2005 XE, or the problem is in VWD 2005 XE it self.
here is what I'm doing:
[Code]....
View 9 Replies
Mar 12, 2010
Consider the following:The SomeEvent fires as expected when any of the dropdown's selection is changed. However if say DropdownList2 has a selection made then I make a selection with either DropDownList1 or DropdownList3, then SomeEvent fires again. What is causing this behavior and how do I get just a single raising of that event?I suspect that when the viewstate for the dynamcially created dropdownlists is restored and the selection restored, then the event is fired because technically the selected index did change when the control was recreated. The reason I suspect this is that the event fires the for each dropdownlist.
View 3 Replies
Mar 30, 2010
I'm creating a LoginView in a class file rather than at design time.
The equivalent LoginView created in a .aspx page and used the same way works fine, and User.Identity.IsAuthenticated is switching from false to true once I log in as a user so the problem must not be there.
But even once logged in, the programmatic version of this LoginView is not switching from the Anonymous template to the LoggedIn and the output is always "You are not logged in".
Anyone have ideas? thanks.
here is my code to create the loginview
private void BuildAddCommentView(HtmlTextWriter htmlTextWriter)
{
LoginView commentsLoginView = new LoginView();
commentsLoginView.AnonymousTemplate = new LoginViewTemplate("AnonymousTemplate");
commentsLoginView.LoggedInTemplate = new LoginViewTemplate("LoggedInTemplate");
commentsLoginView.DataBind();
commentsLoginView.RenderControl(htmlTextWriter);
}
here's the LoginViewTemplate class
class LoginViewTemplate:ITemplate
{
string _templateType;
public LoginViewTemplate(String templateType)
{
_templateType = templateType;
}
public void InstantiateIn(Control container)
{
Label label = new Label();
switch (_templateType)
{
case "AnonymousTemplate":
label.Text = "You are not logged in.";
container.Controls.Add(label);
break;
case "LoggedInTemplate":
label.Text = "YOU ARE LOGGED IN.";
container.Controls.Add(label);
break;
}
}
}
View 4 Replies
Dec 10, 2010
MyDataSource is a datasource stored in a session passed through a search page
protected void Page_Load(object sender, EventArgs e)
{
gridview1.DataSource = Session["MyDataSource"]; [code]....
dates appearing in this gridview display as M/d/yyyy + time for example 12/31/2010 00:00:00
My Question: i need a way to display date as d/M/yyyy with no time for example 31/12/2010 usually i do this by setting the gridview properties htmlencode=false and dateformatstring="{0:M-dd-yyyy}" but in this case the gridview dont show any field because it bind data only at run time
View 2 Replies
Jan 28, 2011
I need to generate a gridview with dynamic columns, on each cell I need a button that inserts-deletes a relationship in a database. The relationship is of course between what is represented by each column and row. I decided to use a gridview and create templatefields which I add programmatically to the table. I successfully got to that point but when i decided to raise a click event from the buttons or a rowcommand from the gridview I could not do it. I´m looking into doing this with button fields right now but I´m curious on how this can be accomplished?
Code:
[Code]....
View 1 Replies
Dec 22, 2010
The drop down list is used to determine what search criteria will be used to find an invoice. I tried to set the Select method in the switch statement. I don't understand how to set the Select Method and the select parameters programmatically though . I tried a few different ways but can't make the compiler happy. My ODS is in scope in the code behind. I'm not able to access it's properties though. The BAL resides in a separate project that is a ClassLibrary. I also have a using statement for the ClassLibrary project in the code behind.
give me an example of how to do this?
Mark up:
[Code]....
[Code]....
[Code]....
[Code]....
View 1 Replies
Jun 3, 2010
I have been using LINQ to SQL for quite a while (about two years). Every thing was fine until now. As usual, I created LINQ to SQL classes and built the project, then created an aspx page. However, I cannot see the DataClassesDataContext in the code behind file. It is not listed in the intellisense list.
View 5 Replies
Jan 19, 2010
For some reason I have noticed that at run time when looking at my source of my ASP.NET page there are tags being created.
<input type="hidden" name="_VIEWSTATE" id="_viewstate" value="..lots of text.." />
and
<input type="hidden" name="_EVENTVALIDATION" id="_EVENTVALIDATION" value="..lots of text.." />
Why is this and what is it for?
How can I make sure that these are not created?
View 2 Replies
Feb 12, 2010
onething is not clear to me that in asp.net 1.1 there was asp.net project type but from 2.0 there is no asp.net project type option rather
there is option called website. in website type project no solution is created and no link is created with IIS.
why microsoft design in this way from 2.0. i think there must be soldin reason & advantage behind it.
View 4 Replies
Jan 11, 2010
I'm creating a static helper class for web services I'm writing. I'm tapping into the API of Telligent and therefore creating these Telligent "service" objects that allow me to do things with the platform. For example, I'm creating a MembershipSerice object in my helper class so I can do membership stuff with the same object. In my helper class I have a property with a getter that creates a new one of these objects:
private static MembershipService _MembershipService {
get return new MembershipService(path, usr, pwd);
[code]...
View 3 Replies
Feb 16, 2011
[Code]....
When I want to get the output values its okay but I also want returning a table as a result data.But Datareader has no rows.is it possible if I want a returning query result and multiple output values togather ?I wrote a test above.I can get output values as sqlparameters. But Datareader attached to a Gridview is empty.can you detect whats wrong here and it doesnt return a query result.So stored procedure is not standart or ı am doing something wrong.this doesnt raise any exception.but not returning any data.
[code]....
View 8 Replies
Jun 7, 2010
I want to define a route that have 2 optional parameters in the middle of the URL the start an end parameters are digits
[Code].....
View 1 Replies
Dec 10, 2010
Since ASP.NET MVC3 RC2 I encounter a bug when posting values to a controller method of which one of the parameter is a nullable int. Steps to reproduce:
I've created a test method
[code]....
In MVC3 RC1 this was working without any problems with the nullable int
Update:
I don't seem to have the problem with a newly created MVC3 website. What could I have in my project that influence model binding to nullable int's? And why would there be a difference between RC1 and RC2?
View 10 Replies