onething is not clear to me that in asp.net 1.1 there was asp.net project type but from 2.0 there is no asp.net project type option rather
there is option called website. in website type project no solution is created and no link is created with IIS.
why microsoft design in this way from 2.0. i think there must be soldin reason & advantage behind it.
I have been using LINQ to SQL for quite a while (about two years). Every thing was fine until now. As usual, I created LINQ to SQL classes and built the project, then created an aspx page. However, I cannot see the DataClassesDataContext in the code behind file. It is not listed in the intellisense list.
View 5 Repliesthere is already an asp.net web site developed,now due to certain requirements i want to use silverlight enabled pages in my project(for its flexible designing purpose).
View 2 Repliesactually i have already created my web site project.Now i want to use login control in my project. how i can use it in my existing project?
View 6 RepliesI have noticed today that when you create a directory in code in a web application the resulting folder structure is not created in the solution explorer (It is fine on disk and app can still access all the files
I am not sure if there is a setting that I am missing or is this a bug?Steps to reproduce
Create a new C# web application in VS 2010. Create a new web page (Default.aspx) and add a file upload control and a button.on the click event on the button add the following code
[Code]....
When the form posts back refresh the solution explorer and the new directory does not appear.Check your file system and the file will be there.Not a massive issue but frustrating.
I have an Interface that has its concrete class defined via a factory. Because of this I found no way to use the Interface tpye directly in my LINQ quesry so I had to use the concrete class types to creat a generic list. The LINQ query works but after calling.ToList() on the LINQ query result I get a List(of MyConcreteClass), but I need a List(of IMyConcreteClass). I have tried everything I can find: .Cast, Ctype, implicit casting, etc. but I always get back one of the (2) messages (depending on if I attempt to cast)message:
"Unable to cast object of type 'System.Collections.Generic.List`1[MyConcreteClass]' to type 'System.Collections.Generic.IEnumerable`1[IMyConcreteClass]'."
...or
"Unable to cast object of type '<CastIterator>d__aa`1[IMyConcreteClass]' to type 'System.Collections.Generic.List`1[MyConcreteClass]'."
Here is the sample code:
[Code]....
For some reason I have noticed that at run time when looking at my source of my ASP.NET page there are tags being created.
<input type="hidden" name="_VIEWSTATE" id="_viewstate" value="..lots of text.." />
and
<input type="hidden" name="_EVENTVALIDATION" id="_EVENTVALIDATION" value="..lots of text.." />
Why is this and what is it for?
How can I make sure that these are not created?
I'm creating a static helper class for web services I'm writing. I'm tapping into the API of Telligent and therefore creating these Telligent "service" objects that allow me to do things with the platform. For example, I'm creating a MembershipSerice object in my helper class so I can do membership stuff with the same object. In my helper class I have a property with a getter that creates a new one of these objects:
private static MembershipService _MembershipService {
get return new MembershipService(path, usr, pwd);
[code]...
How convert a project created in asp.net MVC to Asp.Net MVC Razor?
View 2 Repliesi have created a dynamic web site that is made of these parts
1- Main Site (clients use this part to view the main site
2-Control Panel side (Admins can view and manage the First Part's content)
my problem is that i want to use both projects for another client's web site,but client 2 needs some custom features that should integrated with the existing control panel or Main Site, what is the efficient plan for do this?
My web page has two ways of displaying a particular content. 1. When the page is loaded, the items ( images with anchor tag) are generated using ASP Repeater. 2. When user perform some Ajax action, the images are returned as JSON and I use jQuery for creating the a & img tags.In both these methods, the anchor tags with images are displayed with width 60px. There is no CSS class applied. But strangely the display is not consistent. Here is the both displays:I wonder why this difference occur. I check this with all browsers ( IE,FF& chrome) and all behave the same. Here is my jQuery code:
$('<a>').attr({ href: '/Detail.aspx?id=' + result.it[i].pid, title: result.it[i].nam }) .html("<img src='" + result.it[i].url + "' title='" + result.it[i].nam + "' alt='" + result.it[i].nam + "' width='60px' />").appendTo("#SummaryDiv");
Any idea why this behaviour occurs? I also checked the css applied to these elements in chrome and FF.. they seems to have all the same CSS attributes.
I cannot get beyond the following error message when trying to load any new project or soultion of any type:
View 2 RepliesI have created a link button at run time and that too in a for loop.The text of linkbutton is coming from database.now i want,when i click a link button i should get the text of that particular link button stored in some variable.The code is as follows
for(int i=0;i<5;i++)
{
linkbutton lk=new linkbutton()
lk.text=get.table[0].rows[i]["name"].toString();
}
now from the above code,there are 5 link button created,with the same name lk,now how can i get the text of the particular link button when clicked.if it was single button then was ok,but there are 5 link button with the same name..
How to open project created by someone else in visual studio
I have copy of project created by some one and now I want to be able to open that project and work further on it.
I created a small mvc site using framwork 4.0. I found my hosting company uses 3.5. I changed my project and compiled and there were no errors. Now when I run, I get this error on all pages: How can I get it to work in .net 3.5?
Compilation Error
Description: An error occurred during the compilation of a resource required to service this request. Please review the following specific error details and modify your source code appropriately.
Compiler Error Message: CS0246: The type or namespace name 'dynamic' could not be found (are you missing a using directive or an assembly reference?)
Source Error: Line 134:
Line 135: [System.Runtime.CompilerServices.CompilerGlobalScopeAttribute()]
Line 136: public class views_page_home_aspx : System.Web.Mvc.ViewPage<dynamic>, System.Web.SessionState.IRequiresSessionState, System.Web.IHttpHandler {
Line 137:
Line 138: private static bool @__initialized;
Source File: c:Usersuser1AppDataLocalTempTemporary ASP.NET Files
oot4d3bd5e2b9dd07cApp_Web_home.aspx.78bb4944.oap7wvh_.0.cs Line: 136
How to make new project and website into only one solution?
View 2 Repliesi have stored the txtfile in the database.i need to show the txtfile when i clik the link. and this link has to be created dynamically.
my code below:
aspx code:
[code]....
i have got the link dynamically, but i did not able to download the txtfile when i clik the link. how to carry out this.
Is to possible to make a configuration entry (web.config). That automatically compiles a referenced project(for example a class library) when the site runs? This would be easier for me to maintain on my hosting server. Otherwise i have to always recompile the files and upload them again for every small change.
View 1 RepliesI'm creating a Page object and adding a control to it for printing purposes. The code works, however I can not find a way to add a stylesheet link to the header. In the code I pasted I'm trying to add a link to the header and then add the header control to the page, but this causes an error:
Request is not available in this context
System.Web.UI.Page.get_Request() +8700216
System.Web.UI.HtmlControls.HtmlHead.RenderChildren(HtmlTextWriter writer) +83.....
I have web page which inherit master page.
Their is placeholder inside update panel to which i add my dynamicaly created a div which contain a link button (dynamically created). When i click link button div get disappear and link click event is not fired
<asp:ScriptManager ID="ScriptManager1" runat="server">
</asp:ScriptManager>
<asp:UpdatePanel ID="updatePanel1" runat="server">
<ContentTemplate>
<asp:PlaceHolder ID="PlaceHolder1" runat="server"></asp:PlaceHolder>
[Code] .....
Is it possible that the entire website can be created in Server Script(C# or VB)?
View 4 Repliesthis seems to be a problem only on my new PC, not my prior PC or my coworkers PCs. But, as far as I know, I have installed VS2005 the same way, including the VS80-KB915364-X86-ENU.exe and WebApplicationProjectSetup.msi additions.
I have a VS2005 Solution called 'Intranet' made up of several web projects. One of those web projects is also called 'Intranet'. All of the projects should load as Web Application Projects, which they did on my prior PC.
Now, the 'Intranet' project seems to be opening as a Web Site project. The name of the project in the solution now shows as "C:...Intranet" instead of just "Intranet" and is not recognized as being part of the SourceSafe project(no lock icon shows). If I right-click this project, "Build Web Site" is one option.
VS2008 ( vb.net ) I created a test page with a gridview and link button on it. in code behind i placed the following code
[Code]....
this works perfectly .. however, if i set up the same page, but use a master page as well ... then that code doesnt work. GridView1.Rows(e.CommandArgument.ToString).Cells(15).Text.ToString() is empty
Lets say i create a login and register using the toolbox. i want to create a table where the admin can deleted and ecit the customer details
is it posible to link that table with the custome login and register that was created usingthe toolbox
How to access proxy class of a web service which has been referenced in the website project of a solution within a class library project in the same solution?
I mean no web-service reference/setting is added to the class library and instead it needs to be picked from the web project.