AJAX :: Debugging Goes Into Assembly Code On AjaxControlToolkit.ExtenderControlBase.OnLoad. WHY?
Oct 1, 2010
Not sure why this is happening. Every time I try to debug an Asp.Net page it will eventually go into assembly code showing
the following lines on the top:
AjaxControlToolkit.ExtenderControlBase.OnLoad(System.EventArgs)
--- C:UsersswaltherProjectsAspNetAjaxReleases30930AjaxControlToolkitSourceAjaxControlToolkitExtenderBaseExtenderControlBase.cs
00000000 push ebp 00000001
mov ebp,esp 00000003
etc...
I do have this line in page and that was never changed:
View 8 Replies
Similar Messages:
Sep 23, 2010
Server Error in '/AJX' Application.
Parser Error
Description:
An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Could not load file or assembly 'AjaxControlToolkit.dll' or one of its dependencies. The system cannot find the file specified.
Source Error:
[Code]....
[No relevant source lines]Source File: none Line: 0 Assembly Load Trace: The following information can be helpful to determine why the assembly 'AjaxControlToolkit.dll' could not be loaded.
[Code]....
WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog].
Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3614
View 4 Replies
Feb 11, 2010
I received the following error message. After googling I cleared the ASP.net temp files
The error messwsage is: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The process cannot access the file because it is being used by another process. (Exception from HRESULT: 0x80070020)"
View 6 Replies
Feb 12, 2010
I have my website, it's running fine on my machine, but when I upload it to a server I get this error Server Error in '/' Application. Parser Error Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The system cannot find the file specified. Source Error:
[Code]....
Line 2: Line 3: Line 4: <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit"Line 5: TagPrefix="cc1" %>Line 6:
Source File: /epg/Default2.aspx Line: 4
Assembly Load Trace: The following information can be helpful to determine why the assembly 'AjaxControlToolkit' could not be loaded.
[Code]....
WRN: Assembly binding logging is turned OFF.To enable assembly bind failure logging, set the registry value [HKLMSoftwareMicrosoftFusion!EnableLog] (DWORD) to 1.Note: There is some performance penalty associated with assembly bind failure logging.To turn this feature off, remove the registry value [HKLMSoftwareMicrosoftFusion!EnableLog]. Version Information: Microsoft .NET Framework Version:2.0.50727.3053; ASP.NET Version:2.0.50727.4028 That's the web page. Now I have
AjaxControlToolkit.dll
System.Web.Extensions.Design.dll
System.Web.Extensions.dll
AJAXExtensionsToolbox.dll
in my BIN folder.
View 2 Replies
Mar 3, 2010
I am using AjaxControlToolkit.dll 1.0.20229. For compiling my code in my DotnetNuke module. When I compile our code and upload it on Server Dotnetnuke application which is having latest 3.x version of AjaxControlToolkit.dll. I get following error. I am not compiling my code to a specific version of AjaxControlToolkit.dll.......................
View 2 Replies
Jul 2, 2010
I develop an ASP.NET 2.0 with VS 2008, VB.NET, and sometime a get this exception when web application is launching.
Message Parser Error: Could not load file or assembly 'AjaxControlToolkit, Version = 3.5.40412.0, Culture = neutral, PublicKeyToken = 28f01b0e84b6d53e' or one of its dependencies.The definition from the assembly manifest does not match the assembly reference. (Exception from HRESULT: 0x80131040)
To solve this problem, I need to regenerate the project. I would like to understand why this error append sometime. I try to check the version referenced in project property, try to check the version attribute on Web.Config :
<pages theme="Formulaires" validateRequest="false" styleSheetTheme="Formulaires" enableEventValidation="false" enableViewStateMac="false">
<controls>
<add tagPrefix="ajaxToolkit" namespace="AjaxControlToolkit" assembly="AjaxControlToolkit, Version=3.5.40412.0, Culture=neutral, PublicKeyToken=28f01b0e84b6d53e" />
<add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
<add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" />
</controls>
<namespaces>
<clear/>
<add namespace="System"/>
<add namespace="System.Collections"/>
<add namespace="System.Collections.Specialized"/>
<add namespace="System.Configuration"/>
<add namespace="System.Text"/>
<add namespace="System.Text.RegularExpressions"/>
<add namespace="System.Web"/>
<add namespace="System.Web.Caching"/>
<add namespace="System.Web.SessionState"/>
<add namespace="System.Web.Security"/>
<add namespace="System.Web.Profile"/>
<add namespace="System.Web.UI"/>
<add namespace="System.Web.UI.WebControls"/>
<add namespace="System.Web.UI.WebControls.WebParts"/>
<add namespace="System.Web.UI.HtmlControls"/>
</namespaces>
</pages>
It the correct version... i don't understand about this problem.
View 2 Replies
Feb 18, 2011
while executing shows locate this extendercontrolbase.cs file.
View 1 Replies
May 14, 2010
i have installed the ASPAJAXExtSetup into my system for using ajax because i am using .net 2.0 version. Then i have create the Ajax Enabled website. in myDescription: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately. Parser Error Message: Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The system cannot find the file specified.
Line 1: <%@ Page Language="C#" AutoEventWireup="true" CodeFile="index.aspx.cs" Inherits="index" %>
Line 2:
Line 3: <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %>
Line 4:
Line 5:
View 1 Replies
Jul 29, 2010
i have installed AJAXcontrolsToolkit with my visual studio and placed "Combobox" Ajaxcontrol controls in my webpage . when i am compiling the code getting below error"Could not load file or assembly 'AjaxControlToolkit' or one of its dependencies. The system cannot find the file specified"
View 1 Replies
Oct 29, 2010
I want to disable past dates, so i modified AjaxControlToolkit.dll and named as "Actkit.dll".
View 1 Replies
Jan 17, 2011
So in my website, I use jquery to fetch data through ajax. AS part of the ajax response, some of the javascript code comes as well which is executed. The problem is how to debug this javascript in firebug or other tools. This is my experience so far: putting debugger; doesn't work For some javascript, can't set the breakpoint as that script is not yet loaded. even if this new javascript calls some other function thats already loaded (i.e. i can see it in firebug and set a breakpoint), that breakpoint on that function is still not triggered
However, the javascript does executes normally and even things like console.log works but cant seem to debug it.
View 1 Replies
Mar 31, 2011
I have a problem debugging a web forms application that is configured to use IIS for debugging, under Windows 7 and Visual Studio 2010. An example has just occurred, where I make a change to the code behind for a web form, save, and apparently rebuild before starting the app using F5. The app starts, and I get an error message trying to do something in the app. I tell the debugger to break when an exception is thrown and try my task again, only to be told The source file is different from when the module was built. where the module is C:WindowsMicrosoft.NETFramework64v2.0.50727Temporary ASP.NET Files oot9d7b45ca11a98b19assemblydl35e6cf0b2636409d4_dfeecb01PerfixEMS_Admin.DLL
The physical folder for my test web site is set to the web application project's source folder, so I have always assumed that IIS will look in the bin folder for required assemblies, and these will be rebuilt as expected. Why is this not happening?
View 2 Replies
Jul 5, 2010
Before using any class in your website project/page we have to add it's assembly reference to our project. Right?
Now, when I am using SmtpClient class from System.Net assembly after adding the System.Net.Mail namespace in namespace node of application's web.config file but without adding assembly reference to the project, it still accepting and running the code. Why?
I enquired the machine's web.config file located at C:WINDOWSMicrosoft.NETFrameworkv2.0.50727CONFIG but didnt find assembly reference for System.Net there also.
So bit confused how it is working and where the assembly reference has been added and how?
View 1 Replies
May 19, 2010
I just downloaded the latest AjaxControlToolKit.dll (3.5.40412.0), and update it in my old project. When I compile the project, it shows sucessful. However, when I used my Customized Calendar, it got "AjaxControlToolKit Undefined"
ps: my old project is developed under AjaxControlToolKit.dll (3.0.20820.16598) . // README
View 1 Replies
Oct 4, 2010
I'm wondering if anyone else has run into this problem; I have a collapsible panel extender to which I need to add some event handlers via javascript on page load:
$find("behavioridhere").add_expandComplete(expandHandler);
This was working perfectly...*until* I split the page into the Master/Content page scenario. The control, the scriptmanager and the javascript are all declared in the content page right now. Suddenly, all my client side code comes up as the object being null or not found at the window.onload event. After 3 days of chasing this dragon, I added a test button which calls the same functionality which should run onload and when clicked, it has no trouble at all finding the object *after* the page has fully loaded. I've looked into almost all the posts on the web about this and I've found the question...but not the answer. I've played with the recommended fixes dealing with BehaviorID...the ClientID...the ctl100_control_object and ctl100$control$object names and I'm still dead in the water.Somehow, I have to get this code to run at the page onLoad event.
View 1 Replies
Feb 18, 2010
I have recently discovered that I am affected by this bug http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71515.html
Well,at http://www.mail-archive.com/mono-bugs@lists.ximian.com/msg71529.html they say the work around is to create a global policy assembly and redirect the assemblies that way since it is not read from the web.config.
How do you actually do what they describe there? There is a huge documentation gap in that area with Mono.Also,I can't just recompile the assembly to use the new Mono assembly versions because the assembly is closed source.(but it does work with Mono.)
View 1 Replies
Oct 24, 2010
I am trying to get value of a variable"offset" code behind of content page which is set from default.aspx through onload event from master page.But it gives null value every time. Here is my code.
Maste.aspx
---------
<head>
<asp:ContentPlaceHolder runat="server" id="Headers"> [code]....
View 10 Replies
Sep 21, 2010
I have trawled the internet - to no avail. Woe is me.I have a .Net website running under a .Net framework 4.0 App Pool.The website references various assemblies that have been compiled for .Net 3.5.I have ensured that identical versions of the dll's and pdb's are in the bin folder of the the 3.5 code that I am trying to debug, and the reference path of the 4.0 web site. I.e. the code that I am trying to debug matched the assemblies that are loaded into the app pool's process.
When I attach the debugger using VS2008 with the solution for the .Net 3.5 code open, the breakpoints that I have set are marked as invalid (i.e. marked with an exclamation mark). When I hit refresh on a browser page that invokes the code that I am trying to debug, VS2008 raises an unmanaged code exception.I have researched In-Process Side-by-Side code execution, which is what is occurring in this instance, and is working very well; but for the life of me I cannot find any information on debugging in this scenario.It is not an option to convert the .Net 3.5 projects to use .Net 4.0, nor is it possible to convert them to use VS2010 and leave them targeting .Net framework 3.5
View 1 Replies
Feb 15, 2011
I am converting an old asp project to a new .NET project. Now, all vb code are inside aspx files, and we are on the process of moving all vb script from aspx files to .vb files. My problem is, I can't debug the vb script inside most of the aspx files. All my friends don't have this problem. I think the problem is with vb text editor.
I am using Visual Studio 2008.
Is there anyway, I can make visual studio understand that aspx files have vb script inside them.
can't debug the code
can debug the code
View 2 Replies
Jan 10, 2011
I have downloaded Asp.Net Extension 1.0 and extract it.
Each AjaxControlToolkit.dll is keep in folder (ar,es,de,fr ... ) .There is also one AjaxControlToolkit.dll which is not inside any folder.
My question is which AjaxControlToolkit.dll should be used? I need to have all the AjaxControlToolkit.dll inside my bin folder? or I pick it according to my country? What if my web site is multilingual?
View 6 Replies
Jul 12, 2010
A .net web service is using C language dll. I would like to debug the C code in VC++ 6.0 whilst it's functions are called from .NET web service.
There is no attach process option in VC++6.0 to give aspnet_wp.exe.
how to debug C code called .NET web services.
View 2 Replies
Apr 23, 2010
I am using 'TextBoxWatermarkExtender'.code compiles fine but when i run the application, i get the following js error :
"AjaxControlToolkit requires ASP.NET Ajax 4.0 scripts. Ensure the correct version of the scripts are referenced. If you are using an ASP.NET ScriptManager, switch to the ToolkitScriptManager in AjaxControlToolkit.dll."
I have installed all necessary things, am i missing something.
View 2 Replies
Jan 6, 2011
I know you can copy a Website intact to the server and have it run normally (security and compilation time aside). What about the projects that are in the solution? [whose dll's are copied to the bin when built]. Is there a way to copy the projects' code files to the server as well?
My goal is to be able to debug [by modifying code in the project if needed] directly on the server without having to install an IDE [or keep building on dev machine and copying over dlls]. I can debug/modify the website files, but not the projects.
View 2 Replies
Feb 25, 2010
I am working on an ASP.NET project. When I am debugging, I often want to switch back from my browser to Visual Studio (2008) and edit some code. Visual Studio then won't let me edit the code, unless I explicitly quit debugging first.
Is there any way to configure Visual Studio such that is automatically stops debugging and allow me to edit the code, or do I have to stop it manually each and every time?
Disabling Edit and Continue does allow me to edit the code, but this does not force VS to stop debugging...
View 1 Replies
May 7, 2010
I have been using visual studio 2005 Prof. Edition to debug stored procedure using this tool. However I cannot use the comment field as it is grayed out.
Is it possible to comment code in transact sql using visual studio 2005.
View 3 Replies
