How To Automatically Stop Debugging When Starting To Edit Code?
Feb 25, 2010
I am working on an ASP.NET project. When I am debugging, I often want to switch back from my browser to Visual Studio (2008) and edit some code. Visual Studio then won't let me edit the code, unless I explicitly quit debugging first.
Is there any way to configure Visual Studio such that is automatically stops debugging and allow me to edit the code, or do I have to stop it manually each and every time?
Disabling Edit and Continue does allow me to edit the code, but this does not force VS to stop debugging...
I recently downloaded the mvc 3 RC and I am receiving a type load exception everytime i do a fresh compile and start a debugging session. The error is
System.TypeLoadException crossed a native/managed boundary
[code]...
I can click ok and my debug session continues working as normal. I can close the session and restart without making any code changes, and it will open and work correctly. But, everytime I close, make a compilable change and rerun, I get the message.
I have an puzzling problem. I have a new ASP.NET web application in VS2005 that runs fairly well, but I am having a problem and would like to set a break point to see what is going on. I have compiled the project in Debug mode. I have debug=true set in the web.config. But it appears that the IDE is not attaching to the process at all. Have I overlooked something? I am using the development server and not IIS. This has never been a problem in the past, but is this time.
Whenever I stop debugging an ASP.NET IIS web application it seems to take very long before VS2010 becomes responsive again (2 or 3 minutes). This happens when I close Internet Explorer 9 (which stops the debugging session), stop debugging in VS (which closes the browser) or when I detach the debugger from the debugging menu (which leaves the browser open).
My CPU time for devenv.exe goes up to 25% during this period of time. I use the professional edition (no intellitrace). Starting without debugging performs ok when I close the browser. I have some add-ins and extensions installed like TestDriven.NET, Resharper, PowerCommands, Productivity Power Tools, VisualSVN,...
I am debugging an ASP.Net C# application in Visual Studio 2010, the application is running and execution is currently stopped at a breakpoint. How can I stop the page execution without "Terminate All" or killing the debugging process altogether, similar to what would happen if an unhandled exception was thrown? The "Break All Cntl+Alt+Break" option is grayed out in the Debug menu.
I want to stop the app from running but not have to go through a compile/start again. EDIT: I want execution to stop, not break, so that the page finishes loading and I don't continue running the application from the breakpoint forward. I've looked through the Breakpoints panel, the Debug menu and have right clicked all over but still haven't found the right option.
I want to edit my code while debugging. Some projects i am able to work but in some rojects i am not. When i edit my code I got the following error:"Changes are not allowed while code is running or if the option "Break all processes when one process break' is disabled. The option can be enabled in Tools, Options, Debugging."I tried to do as per the above instructions but still i am getting the same error. Any one know the solution plz help me. By the way i am using Windows application and using VS 2008
I have written the following code in my web application to start the sql Job
[code]....
what could be the cause of this error. The same code and same ddl its running great in my local PC but it is erroring out when the website is deployed to the web server.
I have created 3 tabs in first and second tab DIV I have Asp.net FormView, on Second tabs I have Asp.net GridView. On GridView we have edit link on each row of grid. Now issue is that when i click on edit link of grid Template of grid will change to edit template but tab automatically goes to first tab. I need it should remain on second tab where grid is there I try to use select on clientclick My code as followsThis is under document ready
[Code]....
This is under another script
[Code]....
This is grid in aspx page Where you can see on line 18,19,22 and 23 I am calling onclientclick select()
I have trawled the internet - to no avail. Woe is me.I have a .Net website running under a .Net framework 4.0 App Pool.The website references various assemblies that have been compiled for .Net 3.5.I have ensured that identical versions of the dll's and pdb's are in the bin folder of the the 3.5 code that I am trying to debug, and the reference path of the 4.0 web site. I.e. the code that I am trying to debug matched the assemblies that are loaded into the app pool's process.
When I attach the debugger using VS2008 with the solution for the .Net 3.5 code open, the breakpoints that I have set are marked as invalid (i.e. marked with an exclamation mark). When I hit refresh on a browser page that invokes the code that I am trying to debug, VS2008 raises an unmanaged code exception.I have researched In-Process Side-by-Side code execution, which is what is occurring in this instance, and is working very well; but for the life of me I cannot find any information on debugging in this scenario.It is not an option to convert the .Net 3.5 projects to use .Net 4.0, nor is it possible to convert them to use VS2010 and leave them targeting .Net framework 3.5
I am converting an old asp project to a new .NET project. Now, all vb code are inside aspx files, and we are on the process of moving all vb script from aspx files to .vb files. My problem is, I can't debug the vb script inside most of the aspx files. All my friends don't have this problem. I think the problem is with vb text editor.
I am using Visual Studio 2008.
Is there anyway, I can make visual studio understand that aspx files have vb script inside them.
So in my website, I use jquery to fetch data through ajax. AS part of the ajax response, some of the javascript code comes as well which is executed. The problem is how to debug this javascript in firebug or other tools. This is my experience so far: putting debugger; doesn't work For some javascript, can't set the breakpoint as that script is not yet loaded. even if this new javascript calls some other function thats already loaded (i.e. i can see it in firebug and set a breakpoint), that breakpoint on that function is still not triggered However, the javascript does executes normally and even things like console.log works but cant seem to debug it.
I know you can copy a Website intact to the server and have it run normally (security and compilation time aside). What about the projects that are in the solution? [whose dll's are copied to the bin when built]. Is there a way to copy the projects' code files to the server as well?
My goal is to be able to debug [by modifying code in the project if needed] directly on the server without having to install an IDE [or keep building on dev machine and copying over dlls]. I can debug/modify the website files, but not the projects.
I have been using visual studio 2005 Prof. Edition to debug stored procedure using this tool. However I cannot use the comment field as it is grayed out.
Is it possible to comment code in transact sql using visual studio 2005.
When I right click on ASP.NET development server, it says http://localhost:1394/testing as the ROOT URL. This does not go well with my code. I think the main reason is my code assumes it is in the root folder, and things start breaking when that is not the case. If I deploy this website, then it all works, but I lose my debugging capabilities. Is there a way I can make it skip the name of the folder (which is "testing" in this case)?I am using virtual URL. Things break on virtual urls, not on static ones. (But virtual url works fine when deployed, and make sure it is in the root folder, otherwise it will not work.) [URL]
I have downloaded teh following psscor2.dll from microsoft download center, this is an extension for managed code debugging.But i see no instructions how to install this.All it has is just teh dll, where to place this how to register etc. no info
I'm executing one stored procedure from the '.net' code. Since there is a lot of data, it is taking too much time to execute. Is there any way to stop this execution from the c# code?
In other words, if we execute the query from database itself, there is a option to stop its execution but in the code is it possible?
I'm going to check the database schema at Application_Start event handle in the Global.asax file. If something wrong, I hope to stop the application instead of just catch an exception.
I have a repeater and a user control on my page, when any of the items in the repeater are selected this refreshes the user control accordingly. However I found that if I selected another item before the page/user control had finished to load it produced an error, when left to let the page/control fully load and reselect no error.Clearly this is interrupting the code before its finished, can I stop this from happening by doing some sort of check to see if the user control has finished loading?
migrating my ASP.NET project from IIS 6 to IIS 7.5 I came across an issue with the Managed Pipeline Mode set to 'Integrated'.I have a Global.asax file in my web root to initialize some objects, gather data etc., however I am not able to hit breakpoints in the associated code-behind file (VS 2008). The code is executing very well (as I can tell from Eventlog), but I want to step into all that initializing there and need to have the debugger attached properly.Everything is working as expected in Classic pipeline mode. Since I'd like to benefit from Integrated Mode features in the future I wonder if I have to give up the ability to debug my Application start and error events...
my ddl1 and ddl2 in update panel so i want to insert item in ddl using following condition. It is working fine but when you choose ddl2 more than one then it insert item every time meand duplicate value and populate ddl1 every time.
protected void DropDownList2_SelectedIndexChanged(object sender, EventArgs e) { if (DropDownList2.SelectedValue=="1" ) { DropDownList1.Items.Insert(0, new ListItem("first", "1")); DropDownList1.Items.Insert(1, new ListItem("Second", "2")); DropDownList1.Items.Insert(2, new ListItem("Third", "3")); } else if (DropDownList2.SelectedValue == "2" ) { DropDownList1.Items.Insert(0, new ListItem("first", "1")); DropDownList1.Items.Insert(1, new ListItem("Second", "2")); } }
