I'm trying to debug some problems I have with Javascript code in the Ajax Control Toolkit. I tried setting debug=true in Web.config and adding ScriptMode=Debug in the script manager; but when the error occurs I still get the compressed JS files. Is there any way to get the uncompressed JS files to the browser? Does anyone have a simple self contained example of this working?
View 4 RepliesSo in my website, I use jquery to fetch data through ajax. AS part of the ajax response, some of the javascript code comes as well which is executed. The problem is how to debug this javascript in firebug or other tools. This is my experience so far: putting debugger; doesn't work For some javascript, can't set the breakpoint as that script is not yet loaded. even if this new javascript calls some other function thats already loaded (i.e. i can see it in firebug and set a breakpoint), that breakpoint on that function is still not triggered
However, the javascript does executes normally and even things like console.log works but cant seem to debug it.
I am using a asp.net Drop down list control which is disabled using javascipt, when I am trying to retrieving the value server side the default value is being set on postback.
It is a Web Project and Iam using VS2008.
I am trying to use JavsScript to enable a panael using the ModalPopExtender onOkScript function. What am I doing wrong?
[Code]....
My webpage contains :
I did a break points on the Tools.JS , but while debugging I didn't found my JS in Script Documents (Run Time mode) , and i remarked the exclamation message on my BP saying that this break point willn't be take in mind cause the JS document isn't charged.
My question is : Is there another way to load a JS to be available in the debugging mode? and how could i debug my JS in this case ?
I have a page where the user edits information and i want to run a series of checks on the data and then warn the user with options 'Yes' or 'No' and run code accodingly on their choices.
How would i go about doing this?
I am writing if value_changes then modalpop.Show but this does not work if there is other code within the button submit.
How to write an ajax function to disable a dropdown, until its parent dropdown is selected?
View 1 RepliesI have asp.net dropdownlist control with Ajax CascadingDropDown control.
I also I have asp.net checkbox control. I want to enable/disable CascadingDropDown when the checkbox checked/unchecked using jquery.
I tried diffrent ways but they did not work and if I want to set enable property for the dropdownlist to false it will not work so I have to set the CascadingDropDown enable property to false to disable it but I do not know how.
this is one of the code I tried:
[Code]....
I declared global variable in js file which is filled after jquery.ajax call. Everything works fine when I put breakpoint to see if the global variable has its value with Firebug, I can see it, no problem. But when I remove breakpoint and try again, error with variable 'undefined' shows.I also tried to put result into hidden field and then retreive its value later. Same error.
I don't know what is happening? With breakpoint set in Firebug it works fine, without it, shows 'undefined' error.
P.S. No postbacks are made in these processes.
How do i enable Combobox when disabled?
[Code]....
with codebehind:
[Code]....
When i press the enable button it gets enabled. (But y twice?)
I'm fairly inexperienced with JavaScript and jQuery,but I need both for the ASP.Net website I'm working on. I am slowly figuring it out, but I've been relying heavily on StackOverFlow.Does anyone know of any tool (preferably free) that makes debugging JavaScript and jQuery easier?I've been using Firebug which has been helpful,but I guess I'm just spoiled by Visual Studio's debugger and intellisense.Is there anything like that for JavaScript and jQuery?It would sure make my life easier if there were?
View 7 RepliesI get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesI'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
I have an ASCX component that has a lot of javascript declared in a script tag in the ascx itself. I can set breakpoints, and the debugger stops as it should, but the text that is highlighted in the debugger as the "current line" is nowhere near the actual javascript (it is much higher in the rendered file than it should be). I can "wing it" for one or two lines with the real code side-by-side with the "false" line of execution, but I lose all the hover abilities and everything else that makes javascript debugging useful.
I have tried putting the script at the top of my ascx file, but to no avail. I've tried not setting a breakpoint until the entire page is rendered, so that I have to scroll all the way to where the actual lines of code are, and the debugger still stops somewhere way above it.
I am using AjaxControltoolKit.dll(3.0) with VS2008 C# application.Any webform having AjaxControltoolKit tools like ModalPopUp,AutoCompelte,etc.Gives Following error on Debugging:""
View 2 RepliesI am writing an Ajax Server Control in ASP.NET C# 4.0 in VS 2010.
After writing the javascript prototype class by hand, I don't know of a way to compile and debug file. To see why my "onclick" event doesn't work.
I'm creating an Ajax Server control by inheriting from Control & IScriptControl, and trying to get an onclick event handler to work. The written control is actually a "DIV". Can someone tell me why it doesn't work?
public class FrebbleSquare : Control, IScriptControl
{
IEnumerable<ScriptReference> IScriptControl.GetScriptReferences()
{
[Code].....
If I call my web service directly it works, however, when I try to call it from another controller on the same project I get a 401 exception. Below is the code I use to call the WS, and it is being run in VS not IIS.
[Code]....
I am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
Not sure why this is happening. Every time I try to debug an Asp.Net page it will eventually go into assembly code showing
the following lines on the top:
AjaxControlToolkit.ExtenderControlBase.OnLoad(System.EventArgs)
--- C:UsersswaltherProjectsAspNetAjaxReleases30930AjaxControlToolkitSourceAjaxControlToolkitExtenderBaseExtenderControlBase.cs
00000000 push ebp 00000001
mov ebp,esp 00000003
etc...
I do have this line in page and that was never changed:
I have a dropdownlist inside a DETAILSVIEW....now when i select one particular option. a textbox should open up and enable me to enter a value in it and when i click insert button of the detailsview..the value i entered in the textbox shud enter the database and not the value i selected in the dropdownlist...how do i go about it....also how do i access the ID of the control inside the detailsview.
View 2 RepliesI have an Intranet site reading the windows user name and using it for authentication in the website.
My code works locally but does not read the login name when hosted using IIS 6 on Windows Server 2003 with anonymous access checked. If I un-check anonymous access then in Firefox I keep getting a pop up for username and password which never ends. In IIS 6 it is set to framework 4 and has its own application pool.
User.Identity.Name -returns blank on the server but works fine locally
web.config:
<authentication mode="Windows"/>
<identity impersonate="true"/>
I have an older 3.5 webforms site that works fine on the same server..
It seems that by default, ASP.NET 3.5 running on IIS 6.0 does not do any parallel processing whatsoever. With a quad-core system and a test webforms application that runs an infinite while loop on the server, CPU usage never goes higher than 30% regardless of how many clients are connected and independently running the while loop.What are my options for enabling parallel processing?
View 2 Replieshow to disable/enable file sharing as well as the script for the enabling/disabling Printer sharing.
View 1 RepliesI am toying with the idea of enabling CLR on my SQL server, using EXEC sp_configure 'clr enabled', 1
However, I am sharing my database server with several other developers and their projects. I've heard vaguely that their might be security issues with enabling this.
Does anyone know what these issues might be? Is CLR safe to use on SQL Server?
The general idea is that a LinkButton called InsertButton is disabled by default when the page renders and a div called divMainForm is styled with display: none. If a different button is clicked, a jQuer function is called that toggles the visibility of divMainForm. At that time, the InsertButton should also be enabled. I've tried several variations of this function:
[Code]....
The divMainForm toggles with no problem. I can't seem to find the right combination to a) determine if divMainForm is visible or not and b) enable the InsertButton. I've tried the above and also
.css("display") == "block"
.is(':visible')
No errors but none of them seem to detect the status of the div correctly or enable the button.