My webpage contains :
I did a break points on the Tools.JS , but while debugging I didn't found my JS in Script Documents (Run Time mode) , and i remarked the exclamation message on my BP saying that this break point willn't be take in mind cause the JS document isn't charged.
My question is : Is there another way to load a JS to be available in the debugging mode? and how could i debug my JS in this case ?
I'm trying to debug some problems I have with Javascript code in the Ajax Control Toolkit. I tried setting debug=true in Web.config and adding ScriptMode=Debug in the script manager; but when the error occurs I still get the compressed JS files. Is there any way to get the uncompressed JS files to the browser? Does anyone have a simple self contained example of this working?
View 4 RepliesI declared global variable in js file which is filled after jquery.ajax call. Everything works fine when I put breakpoint to see if the global variable has its value with Firebug, I can see it, no problem. But when I remove breakpoint and try again, error with variable 'undefined' shows.I also tried to put result into hidden field and then retreive its value later. Same error.
I don't know what is happening? With breakpoint set in Firebug it works fine, without it, shows 'undefined' error.
P.S. No postbacks are made in these processes.
I have a precompiled website deployed in a remote test server. I want to debug the site from my computer. Following page says that the compilation should be performed with symbolic information.
[URL]
I had compiled my application in debug mode.
Unfortunately the breakpoints are not hit even with a copy of the precompiled website deployed in my local IIS. Following were the actions done with the local copy.
1. Requested the Page
2. Opened the source code and attached visual studio to aspnet_wp.exe
3. No break points are hit( I can see visual studio giving the hint- The breakpoint will not currently be hit. No symbols have been loaded for this document.)
i have problem with Visual Studio 2010 on Windows 7 x64. When i started asp.net site debugging, it stoped working. Only solution is restarting IIS.
Have anyone experiences with this?
I recently upgraded to Windows 7 Ultimate on my work computer. Before this debugging a website in Visual Web Developer 2008 was really fast - the page loaded up like a normal website would.
Since I've upgraded to Windows 7 the page loads like normal but gets stuck for about 30 seconds at the end of the load - this is slowing me down as I normally need to use the FireBug tool as soon as the page has loaded.
So in my website, I use jquery to fetch data through ajax. AS part of the ajax response, some of the javascript code comes as well which is executed. The problem is how to debug this javascript in firebug or other tools. This is my experience so far: putting debugger; doesn't work For some javascript, can't set the breakpoint as that script is not yet loaded. even if this new javascript calls some other function thats already loaded (i.e. i can see it in firebug and set a breakpoint), that breakpoint on that function is still not triggered
However, the javascript does executes normally and even things like console.log works but cant seem to debug it.
I'm fairly inexperienced with JavaScript and jQuery,but I need both for the ASP.Net website I'm working on. I am slowly figuring it out, but I've been relying heavily on StackOverFlow.Does anyone know of any tool (preferably free) that makes debugging JavaScript and jQuery easier?I've been using Firebug which has been helpful,but I guess I'm just spoiled by Visual Studio's debugger and intellisense.Is there anything like that for JavaScript and jQuery?It would sure make my life easier if there were?
View 7 RepliesIn Visual Studio, when I click > Debug, > Start Without Debugging, (with my default browser set to IE), the application starts but it opens 2 IE browser instances. It opens 1 IE instance to start BUT when I close it, it launches another browser instance with the same start page. This bug is repeatable and consistent behaviour, that I can reproduce on-demad in IE.
(In some other minor variations, it seems that depending upon exactly how I start it, it will open 1 browser instance with 2 tabs, each tab having the startup page in it. However, this is not yet repeatable or consistent. It has happened; but, as of now, I am uncertain as the the exact steps to reproduce this particular variation of the anomaly.)
I am using Internet Explorer 8 (IE8).
I am using on Windows 7 32-bit.
I am using Visual Studio 2008 Standard.
I only have 1 startup project defined in Solution properties.
I have all Toolbars And Extensions set to "Disabled" in IE.
I have turned off "Automatic Crash Recovery" in IE.
(This does NOT happen in FireFox.)
I'm creating a website in Visual Studio 2010. I would like to use Visual Studio for C# debugging, but it also uses Visual Studio as JavaScript debugger. Is there a way to disable script debugging for Asp.Net website projects? I run my projects by hitting F5 in my Visual Studio. (I've noticed that when I attach the debugger manually, I can specify the type of stuff I would like to debug.) Note: I would like to debug, but not with Visual Studio. The developer toolbar is enough.
View 3 RepliesI get this error when I hit F5 in VS 2008. I have checked that Windows authentication is enabled on the site and it is. I can mannully attach the debugger to the IIS process and it works. What could be wrong? I have tried alot of things without success.
View 2 RepliesI'm trying to debug my web application on my localhost machine in Visual Studio 2010 and I keep getting this error: "unable to start debugging on web server. The Microsoft Visual Studio remote debugging monitor(MSVSMON.exe) does not appear to be running on the remote computer."
Is there a way I can turn this off as I'm not trying to make any attempts debugging remotely.
I have an ASCX component that has a lot of javascript declared in a script tag in the ascx itself. I can set breakpoints, and the debugger stops as it should, but the text that is highlighted in the debugger as the "current line" is nowhere near the actual javascript (it is much higher in the rendered file than it should be). I can "wing it" for one or two lines with the real code side-by-side with the "false" line of execution, but I lose all the hover abilities and everything else that makes javascript debugging useful.
I have tried putting the script at the top of my ascx file, but to no avail. I've tried not setting a breakpoint until the entire page is rendered, so that I have to scroll all the way to where the actual lines of code are, and the debugger still stops somewhere way above it.
When I press start on my VS2010/Silverlight/C# project, it opens a new instance of the included webserver and opens my browser window so I can test the application. Unfortunately something has happened and I am not sure what it was.. The browser window now opens the starting page with a local machine path (C:...page.aspx) rather than the normal webserver path through http (http://localhost:33592/page.aspx). It is a Silverlight Navigation project using c#/asp.net code behind.
View 2 RepliesI am running Visual Studio 2010 (as Admin), IIS 7 on Windows 7 x64. I am able to run the ASP.NET web site in IIS 7 without debugging just fine, but when I press F5 to debug it, I get: Unable to start debugging on the web server. Could not start ASP.NET debugging. More information may be available by starting the project without debugging. Unfortunately the help link is not helping me much and leads down a heck of a large tree of things. I checked the following:
Security requirements — I don't recall having to do anything special before. The worker process in IIS7 is w3wp.exe. It says that if it's running as ASPNET or NETWORK SERVICE I must have Administrator privileges to debug it. How do I find out if I need to change something here? Web site Property Pages > Start Options > Debuggers > ASP.NET is checked. Use custom server is set to the URL of the site (which works fine without debugging). Debugging is enabled in web.config. Application is using ASP.NET 3.5 (I want to move to 4.0 eventually but I have some migration to deal with). Application pool: Classing .NET AppPool (also tried DefaultAppPool). Surely it shouldn't be that hard to install IIS, VS, create a web site, and start testing it?
I am trying to create a toolbar on top of my website to be used on an iphone. However, iframe is giving me considerable trouble in that it refuses to allow the page to scroll. Here's my code:
[code]....
How can get URL of website in javascript and c# code behind.
View 1 RepliesCurrently I am implementing print functionality in a website. Can any one tell me what are the best practice to implement this?
View 2 RepliesI use Web Forms and Asp.Net with MS SQL.
For my Web Site I need store these codes belove, maybe others in future:
Google Analytic Code
Some JavaScript codes
HTML Footer and Header for my template.
I need a solution which could be centralized, use CACHE, easy to update:
01 Use a DATABASE with a Table (configure table) which for every records (VARCHAR) would allow storing of these spinets of code as string.
02 Use simple Text Files in a specific folder, so I can include these files in my code. I could update codes using FTP and NotePad (Here I am concern about cache).
03 Use Web.Conf file.
04 Use Text File and a Class wich would manage storing in cache the content of these file.
I am using AJAX in some pages. this causing my website to grow. 300K is ajax. I would like to lower this to a normal size so the site can be loaded quicly.I have IIS7 and I already have encription for files. What else should I do to handle this problem?
View 4 RepliesI would like to display an output on an external website by including a javascript on that external website.
On my aspx-site i did:
[Code]....
I only get a white page on my external site :(
I have to make changes to classic asp website where once a button is clicked it autologins to a third party website with a intermediate page that warns that you are logging in to a third party website.
The thirdparty is providing us with a username and password and gave us an examle javascript to encode the password to send to them. Now where do I store the userid and password. I cannot execute the javascript on the serverside. It has to go to the client. If the asp page which has the encryption javascript goes to the client side then the source can be viewed and the username and password is given out.
Is there a way that I can have hidden asp page whose only job is to encrypt the password and create a new url and auto redirect it to that new url.
So when the user clicks ok on the intermediate warning page I redirect it to this hidden asp page which does the encryption and a creates a url for get method and redirects to that page.
I am a novice as far as java script and classic asp is concerned.
I get an error when trying to compile this simple website:
[Code]....
The error message is:
x is not a member of ASP.default3_aspx
The meaning of the error message is clear to me, and adding Me..Button1.Attributes.Add("onclick", "x.doMethod();") in codebehind works, but as you can imagine, that is not really what I want. How can I achieve my initial goal?
I have a search textbox in the web page. When the user presses enter key after entering text in that textbox then the search function should get executed. How to do this?
View 5 RepliesI am developing a huge almost millions of users and very complex logic , secure and optimize web application.but i am thinking to use client side archeticture with asp.net like gmail is using.
View 2 Replies