AJAX :: Tab Container W/ Dynamically Added Tabs - Content Mixing On Postback
Mar 2, 2010
I have a page with 4 fixed Tabs. Tabs 1 and 2 are always in position 1 and 2. However, the users are allowed to create their own tabs and add their own html content. I do this by creating a new tab in codebehind and inserting it into the tabcontainer AFTER the frist 2 and before the last 2 tabs. There could be several of these. EX: "F1 | F2 | U1 | U2 | U3 | F3 | F4" where F is a fixed tab and U is a custom tab.
As long as ALL tabs are visible then everything works fine after postbacks.
Based on user settings I sometimes hide fixed tab 1. Everything loads fine the first time. However, on postback The content on fixed tab 4 (always the last tab) is displayed on the bottom of EVERY tab (fixed or custom). It is still displayed in fixed tab 4.
A little background on the code:
Since the tabs are added dynamically they do not exist on postback and must be re-generated every time. This is done in Page_LoadComplete. I have tried it on PageLoad and it behaves the same way.
If I do not re-generate the pages on post back then the problem goes away - as do the custom tabs.
The only thing I could find was from last year, and was supposedly fixed (http://www.codeplex.com/AjaxControlToolkit/WorkItem/View.aspx?WorkItemId=16321
View 1 Replies
Similar Messages:
Jun 4, 2010
I need to change the order of some tabs in a tab control, how can achieve this?
View 4 Replies
Jul 16, 2010
I have a web page with two tabs, "Release Inventory" and "Recreate Pull Sheet". I am using a tab container and tab panels. It looks fine in the design view but as soon as I view it in a brower the tabs don't show up. All I see is the Header text for the tabs. It looks like this:
"Release InventoryRecreate Pull Sheet"
You can click "Release Inventory" or "Recreate Pull Shee" and you will see the information in the tabs, but the actual tab appearance is not showing up.
Here is my code:
[Code]....
View 5 Replies
Apr 26, 2010
I'm trying to get a page working using a tab container and multiple tabs. So, I created a new blank page and pointed it to my master page. The master page has two content panels within it.
I'm adding the tab container in the top conent holder, but when I go to view the page, I get an error. Below is the error followed by the code.
The Controls collection cannot be modified because the control contains code blocks (i.e. <% ... %>).
Description:
An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: The Controls collection cannot be modified because the control contains code blocks (i.e. <% ... %>).
Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082
[Code]...
View 1 Replies
Nov 8, 2010
I know this has been asked before, but I feel like I'm losing my way trying to follow the other examples out there. Does anyone see a straightforward solution to my particular problem?
Goal:
Two column Master Page
Left column contains a list of [stuff] (I'm trying a Repeater with LinkButtons)
Right column contains a TabContainer which will add dynamically created tabs when buttons on the left are clicked.
Left side looks like this:
<asp:Repeater
<ItemTemplate>
<asp:LinkButton ID="lbShowReport" runat="server" Text='<%# Eval("Title") %>' CommandName="Select">
</asp:LinkButton>
<asp:HiddenField ID="hfReportID" runat="server" Value='<%# Eval("Id") %>' />
</ItemTemplate>
</asp:Repeater>
I had initially been creating tabs in the LB's OnCommand event, but of course this means that any tab generated by one click is lost if the user clicks another LinkButton.
So I moved the code to create a new tab to the OnInit section of the page and attempted to loop through the RepeaterItems comparing the UniqueId of each LinkButton until I found the one that was clicked using Request.Form["__EVENTTARGET"].
When I tried to loop through the RepeaterItems, however, the count was always 0, and the Repeater would not populate.
So now I am rebinding the Repeater in the Init section on every post-back - this allows me to find the LinkButton that was clicked. I then add the new Tab based on the LB that was clicked like this:
[Code]....
This properly adds new Tabs to the TabContainer using this code:
[Code]....
but I still have the issue where I can only ever have one dynamically created tab in the TabContainer at a time. All of the code above is being executed in OnInit, which I thought would save the tabs during post-backs, but instead this is behaving as tho I was adding the tabs in the OnCommand event of the Link Button...
View 3 Replies
May 15, 2010
How to get a postback on a button added dynamically
View 3 Replies
Mar 9, 2011
I've made a pag with a content div that has min-height set to 1200 pixels, and a black bacgkround color..
When I add a bunch of lines in the .aspx page (in html) , it works perfectly, it changes the black background height to the required height if it was more than 1200 pixels.
But, if I put a PlaceHolder in side the content div, and add a bunch of lines
dynamically to the PlaceHolder, it doesn't work, the page shows the content with background of 1200 pixels of height, and at the bottom of it no more content background, but continues showing the rest of the lines
outside of the content div..
View 16 Replies
Jun 24, 2010
I'm running into a weird issue.. Basically, a user logs into a page and based on his role status(admin or user) determines how many tabs he sees in a tabcontainer. If he is just a "user" then tab index 0 and 1 need to be hidden because they contain admin only functionality.
if(user)
{
Container.Tabs[0].visible = false;
Container.Tabs[1].visible = false;
}
However the problem is if I set more than 1 tab index to visible = false the entire container disappears. Could this be a bug? I know you can only have one tab visible at a time.
View 2 Replies
Dec 22, 2010
Problem: Postbacks are causing eventtarget errors because they are going back to the aspx page where the tabs are defined instead of going to the href page. I have a main page called Default.aspx. On it is the setup for the jquery tabs using ajaxoptions.
Default.aspx javascript for tabs:
[Code]....
The dropdown is filled during the page load of lists.aspx. How can I get the postback to go to lists.aspx instead of back to the Default.aspx? I tried using IFrames and it worked great for postback issue but not for dynamic loading of pages. It loaded all pages up front which is not ok.
View 1 Replies
Sep 28, 2010
have a tabcontainer, where I put a radio button list having two button. If i select the second radio button then some fieds will not display.Now the problem is I gave the size to the first panel 300px, and I placed all the buttons at the below. Now whenever the fields are not displaying, then a vacant plce is created. If now I change the tab panel height then the buttons are cut away.So can I dynamically incresed the size of the panel?
View 3 Replies
May 2, 2010
I am using Ajaxtoolkit in my application. I am declaring the tabcontainer and tab panels on the serverside. I just have my Updatepanel on the Client-Side. I was wondering how to assign css to the tabs like onhover or click would change its background color and highlight the tab up.
Secondly, since I am dynamically creating these tabs, how would I put a close for each of the tabs?
View 1 Replies
Sep 1, 2010
I have a tab container in aspx page and i want to enable disable the last tab in aspx page my tab container is like below
[Code]....
Now for disabling the last tab i used the following in code behind page load:
//tabAdvanceSettings.Enabled = false;
I also want to enable this tab panel on client side when a user uses a shotrcut like Ctrl + Shif + A as shown below but this shortcut only enables the tab not the two user controls ptresent in the last tab. The code for enabling the last tab is :
if (e.keyCode == 65 && isCtrl == true && isShift == true) // Ctrl + Shift + A
{
$find('<%=tabContainer.ClientID%>').get_tabs()[2].set_enabled(true);
}
How can i enable the last tab and also the controls present in the last tab?
View 2 Replies
Jan 13, 2010
I m working on "loading tabs dynamically" using AjaxControlToolKit
Rightnow, i m using the WebUserControls to load each and every tab.
how to load each tab dynamically evertime with respective aspx pages.
View 4 Replies
May 7, 2015
Dynamically add Tab Pages to tab control in Web form using asp.net and c# ...
View 1 Replies
Feb 12, 2010
I am using the tab control and basically I have 4 buttons. Each button will load a seperate ascx control into a brand new tab. After about 4 tabs, since it has to regenerate all 4 tabs, the speed in order to add tabs just becomes too long for my tastes. Is there any way to remedy this and make it go faster?
EDIT2:Using Internet Explorer 7.0 and 8.0
EDIT: Some Code, I store the i in viewstate and loop through this every time for each panel per regeneration
private void BuildNewTab(int i)
{
TabPanel newPanel = new TabPanel();[cod]....
View 1 Replies
Jun 11, 2010
I have implemented a collapsible panel which works properly. It collapse and it extends the content panel when the link corresponding to the information panel is clicked. Within the content panel I have an HTML table control containing several rows and columns. Within one of these columns I have added a container (a <DIV> tag) holding a Google map. Here is the issue:
The map does not properly show up within the container when the content panel is extended. It appears to be shifted to the left, not centered as it should be. Therefore, any attempt to place a point mark on the map (centering the map over that point mark) is unsuccessful since the map doesn't show properly in the container so the point mark is not visible. Even if I drag the map with the mouse within the container, it always reposition at a bad location. If I comment out the extender, leaving the panel as is, the maps shows properly within its container. It is the collapsible panel extender which makes the layout to be incorrect.
View 2 Replies
Jan 4, 2010
I am building a website in which all of the site layout is in Master page and the content of the site is in the inherited pages. I have various links for navigation in which i simple use Response.Redirect to transfer to different pages. Now the problem is that I want to put the content place holder inside Ajax Update panel so that the postbacks are Asynchronous and I want to show the postback by an animated image inside Update Panel progress control. The problem is that I am unable to achieve this result and the entire page is posted back and rendered again. I have placed the content place holder inside the Ajax control toolkit's Update panel but it does not work. Is there any way that I can change the content of the content place holder to a new page with asynchronous postback.
View 9 Replies
Jun 16, 2015
My bootstrap tab is inside update panel now on postback it loses its active tab state . I referred this article :
[URL]
But it didn't worked for me. How to maintain bootstrap tab active on postback inside update panel.
View 1 Replies
Feb 19, 2010
There seem to be about a zillion posts on similar situations, but I can't seem to find an answer in any of them. I've tried numerous techniques that I've seen, but nothing is making a difference. I have a Master page with an UpdatePanel with a ContentPlaceholder. In the content page I have a calendar. Above the calendar are LinkButtons that trigger a Command event to switch between Day Week and Month views. In the calendar DayRender event I am adding items to each day of the calendar. Items are pulled from a database. All items are contain within a dynamically generated div to help with layout. Each event that is added is a hyperlink that takes the user to a page where they can edit details of the event.
If there are more than 4 events, I'm adding a LinkButton with the text, "(more...)". I'd like that to trigger a Command event so that I can switch to the Day view of the appropriate day:
[Code]....
The problem is that, while the anchor tag gets generated with the proper text and ID, no href attribute is rendered and, as a result, nothing happens when you click "(more...)". I've tried switching to a Click event, but it does the same thing. (And I need the Command event to use the code I already have in place for some other buttons.) I've tried rendering it as an asp:Hyperlink and using ClientScript.GetPostBackClientHyperlink. That gives me a hyperlink, but I don't know how to get it to trigger so it results in the server interpreting it as a Command event and linking it to the proper event handler.
View 2 Replies
Jan 8, 2010
I have the following code in Page_Init (actually in a function called by Page_Init in response to a __doPostBack call)
System.Web.UI.WebControls.DropDownList ddlGroup = new System.Web.UI.WebControls.DropDownList();
rowString = rowNumber.ToString();
View 7 Replies
Feb 14, 2011
I have been adding different JQuery Carousels to AJAX Tabbed Panels - the first one displayed on the page always works. But any other tabs dont work when I select the tab. I have about a dozen different carousels.
Can anyone recommend one that works in AJAX Tabs or how I can go about rectifying this?
View 1 Replies
Jun 25, 2010
This is what i am trying to do with asp.net updatepanel.i have button and a panel inside my updatepanel. when the button inside the updatepanel gets clicked i want to dynamically add new controls such as LinkButtons to my panel1 without full post back. Now when the dynamically added controls gets clicked it causes a full post pack and also not calling "LinkButton1_Click" event. i am sure i am doing something wrong here.
[Code]....
[Code]....
View 3 Replies
Feb 24, 2010
I have sqldatabase tables.I am reading table data and putting in a tabconatiner(wth tabs containing textbox, checkbox etc) specific to a client. If a client has more than one row i want to iterate through the rows and read each row data. Basically I want to use a button-click to read the next row data at put it in the tabs and so on. I used sqldatareader and a while loop.I can read the data but while loop iterates through the rows and show the last row data / i want to use a button to go to the next row and show data.
SqlDatareader reader=null;
reader=cmd.ExecuteReader();
while(reader.Read())
{
txtboxName.Text=reader["Name"].ToString();
}
protected button_Click(Object sender,EventsArgs e)
{
//I want to read row data in this button click
}
View 8 Replies
Apr 26, 2010
[Code]....
I have an update panel and inside there are a button i want when i press the button the content well be cleared and then a label will be added to the update panel dynamicly and focus that the button is inside the update panel
View 4 Replies
Apr 13, 2010
is there any way to make the content container of an Ajax accordion invisible ?
View 1 Replies
