ActiveRecord Initialize Method In Application_Start?
Dec 20, 2010
I have a site that uses ActiveRecord. I'm getting an exception that says "An ActiveRecord class () was used but the framework seems not properly initialized. Did you forget about ActiveRecordStarter.Initialize() ?" This is a web application, and the Initialize() method is called by the Application_Start event handler.
I created a new page that also calls the initialize() method. If I visit that page once, then the rest of the site works. If I visit it a second time, I get an exception stating that the Initialize() method can only be called once.
I've tried modifying the web.config and resetting the application pool to force Application_Start to run.
This only happens in production; dev, my stage, and client stage are fine. Production is the only load-balanced environment--I'm not sure if that comes into play.
Edit: We have another site deployed in the same environment which successfully uses ActiveRecord with the same initialization code. One difference is that the site that is working has only the ActiveRecord code in Application_Start; the site that doesn't also sets up some URL routing in Application_Start.
View 1 Replies
Similar Messages:
Aug 13, 2010
In my company app they are doing the following. I do not understand that what initialize does? Do we need to Initialize assemblies before using them? and what kind of assemblies needs to be initialized?
Below is the code:
[code]....
View 2 Replies
Apr 8, 2010
I'm trying to use SESSION in my MVC application.I wrote following line in Global.asax in Application_Start() method file:
protected void Application_Start()
{
AreaRegistration.RegisterAllAreas();
//uzupełnij zmienne sesyjne
HttpContext.Current.Session["LOCATION_ID"] = 15;
RegisterRoutes(RouteTable.Routes);
}
I also enabled SessionState in Web.config by addind following line:
<sessionState mode="InProc" cookieless="false" timeout="120" />
And when I run the application I'm getting this exception:
Szczegły wyjątku: System.NullReferenceException: Odwołanie do obiektu nie zostało ustawione na wystąpienie obiektu.
Błąd źrdła:
[Code]....
Wiersz 31: //uzupełnij zmienne sesyjneWiersz 32: Wiersz 33: HttpContext.Current.Session["LOCATION_ID"] = 15;Wiersz 34: Wiersz 35: RegisterRoutes(RouteTable.Routes);
View 5 Replies
Jan 10, 2010
I want to create my own naming convention for page events rather than AutoEventWireUp but I couldn't find Component Initialize methods any where ? Should I override it ? But in which class it is defined ?
Edit :
For example : I don't want to use Page_Load but LoadThisPage naming. So It should be like
Load += new LoadThisPage(sender,e);
I was expecting a InitializeComponent method where I can initialize page,controls etc. events handlers...But it turned out to be Constructor function :
So what confused me is I thought there should have been a method like InitializeComponent which does things for me already created by Designer itself so I thought I could define my own event handler names within this method by overriding it in the say Default.aspx.cs .
View 2 Replies
Jul 6, 2010
I'm overriding the Controller.Initialize method to set some stuff before each ActionResult is executed, however I'm finding that the method is being called multiple times for each request (anywhere between 2 - 10 times). I'm running in Cassini.
My hunch is that it is running for all static files (images, css etc) as well as the requested action - although I may be wrong? I thought maybe something was wrong in my web.config but it all looks right to me.
View 6 Replies
Jul 29, 2010
in my controller I have code that validates URL. if not valid I want it to 301 redirect:
[code]....
but this still goes continues on and executes any code after. how would i simply 301 redirect? and NOT continue to process any code after break;?
View 3 Replies
Mar 23, 2010
I'm trying to use Castle ActiveRecord with c#.
I'm moving data from an old database (FF2) to spatiaLite (sqLite)
The first few tables are updated without any problems. Then every table after gives and error
when I try to save. None of these tables have composite primary IDs.
SnapFarms tbl = new SnapFarms();
.... loop
if (theField.Equals("clientid")) tbl.operationId = getString(val, "{000-000}"); else
if (theField.Equals("farmid")) tbl.farmId = getString(val,"{000-000}"); else
if (theField.Equals("farmname")) tbl.farmName = getString(val,"Missing"); else ...
... end loop
tbl.Save();
exception message::Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
There is no Index column so what is going on?
View 4 Replies
Aug 27, 2010
I am getting the following error in an Asp.Net Castle ActiveRecord app when trying to update an object:
"a different object with the same identifier value was already associated with the session"
I've looked up and down my code to see where else the object might have been created but I'm not seeing it. This is baffling as I have the exact same code on another page that works fine on updates
Now I'm thinking of trying to see where this other object is in the Session and either kill it or find out how it got into the session. How can I find this object?
[Update]
Ok, I finally found where the object is being called. However, I would still like to know how to find objects in the session for future reference.
View 1 Replies
Nov 7, 2010
public void Add(IDataProvider provider){
var key=KeyValue();
if(key==null){
var newKey=_repo.Add(this,provider);
this.SetKeyValue(newKey);
}else{
_repo.Add(this,provider); //NullReferenceException was unhandled by user code
[Code]....
View 1 Replies
Jun 15, 2010
I've got all of my ASP.NET requests wrapped in a Session and a Transaction that gets commited only at the very end of the request. At some point during execution of the request, I would like to insert an object and make it visible to other potential threads - i.e. split the insertion into a new transaction, commit that transaction, and move on. The reason is that the request in question hits an API that then chain hits another one of my pages (near-synchronously) to let me know that it processed, and thus double submits a transaction record, because the original request had not yet finished, and thus not committed the transaction record.
So I've tried wrapping the insertion code with a new SessionScope, TransactionScope(TransactionMode.New), combination of both, flushing everything manually, etc. However, when I call Refresh on the object I'm still getting the old object state. Here's some code sample for what I'm seeing:
Post outsidePost = Post.Find(id); // status of this post is Status.Old
using (TransactionScope transaction = new TransactionScope(TransactionMode.New))
{
Post p = Post.Find(id);
p.Status = Status.New; // new status set here
p.Update();
SessionScope.Current.Flush();
transaction.Flush();
transaction.VoteCommit();
}
outsidePost.Refresh();
// refresh doesn't get the new status, status is still Status.Old
View 1 Replies
Nov 12, 2010
The Application_Start method in Global.asax.cs was being called in my WCF web services application when it was running under ASP.NET 2.
It has been recompiled with the .NET 4 framework and it now runs under ASP.NET 4. However, that method is not ever being called.
View 1 Replies
Jun 9, 2010
I have an application made on asp.net mvc 2 and it is on IIS 7.5 on my pc I tried profiling it and I noticed that Application_Start gets called more than once, anybody knows why is this happening ?
View 1 Replies
May 7, 2010
I've been using different routes.MapPageRoute registrations that were dependent on the domain (I have multiple pointing to the same web application). I was accomplishing this by determining the domain (or sub-domain) using Context.Request.Url.Host within RegisterRoutest. Of course, this all is kicked off at Application_Start, which worked in IIS6, but now I've moved to IIS7, and Request doesn't seem to be available at Application_Start anymore. Can anyone suggest a way to get the domain at Application_Start, or is this simply not possible with IIS7?
Here's an example of the code I've been using in my Global.asax:
[Code]....
Error Returned:
Request is not available in this context
... System.Web.HttpContext.get_Request ...
View 5 Replies
May 6, 2010
I'm implementing a simple HttpModule, where I want some code to run when the web application is started. But I'm surprised to find that the Application_Start event I would normally use from Global.asax is not available from a HttpModule. Is that correct, or am I missing something here?
How do I hook into the Application_Start event from an HttpModule?
View 3 Replies
Jan 13, 2010
I'm in the process of adding ASP.NET MVC code to a preexisting ASP.NET Webforms project. The various tutorials suggest adding routing to a method called from Application_Start() in Global.asax. My Global.asax already has an Application_OnStart(Object,EventArgs) method with some setup code.
If I try to have both Start and OnStart, the OnStart doesn't get called (and the setup fails, causing errors). It looks like I have to choose one or the other.My question is: which one should I be using? What is the difference between them? Are they called at different times?(Note: at the time of this writing, the top three Google hits are useless and/or misleading.
View 3 Replies
May 5, 2010
I have some code that initializes a static singleton class, which is needed by all requests. Therefore I thought I could add it to global.asax Application_Start. Can I be 100% sure that all requests will block while Application_Start is loading to guarantee that all the requests will have access to it?
View 1 Replies
Apr 17, 2010
I have 3 IIS7 virtual directories which point to the same physical directory. Each one has a unique host headers bound to it and each one runs in its own app pool. Ultimately, 3 instances of the same ASP.NET application.
In the Application_Start event handler of global.asax I would like to identify which instance of the application is running (to conditionally execute some code). Since the Request object is not available, I cannot interrogate the current URL so I would like to interrogate the binding information of the current virtual directory?
Since the host header binding is unique for each site, it would allow me to identify which application instance is starting up.
View 2 Replies
Oct 29, 2010
I've got an ASP.NET web app that is starting to show some very strange behavior. Here's some example code:
// in Bar.cs
public class Bar {
public static Baz baz = Something.Step2();
}
// in Global.asax
public void Application_Start(...) {
Something.Step1();
}
The short version of the story is this: On some machines, Something.Step2 is executed before Something.Step1 and is throwing an unhandleable exception. On other machines, Step1 correctly executes before Step2. Global.asax and all the objects it uses do not refer to Bar at all.
When are static fields supposed to execute in relation to other programming elements? Why would two machines (both Win7 64-bit, both with .NET 4.0, same IIS version, etc) execute things in different orders? The order is consistent on each machine too. On my machine, it always executes Step2 before Step1, but on my coworker's machine it always executes Step1 before Step2.Update I've found the root cause why my static field is being accessed. Class "Bar" from my example is actually a custom authentication module, and is referenced in web.config as the Authentication handler under System.webServer. If I remove that line from web.config, my system calls Step1 first and never calls Step2 at all. My question changes subtly to: "Why does web.config cause my static initializers to fire, and why does it cause them to fire before Application_Start executes?"
View 1 Replies
Jul 14, 2010
In our Application_Start event handler we're performing some actions that intermittently fail due to file locking issues. In this scenario we would like to return the application to an "un-started" state.By this I mean that the user will be shown an error page, and then the next time a user hits the site the Application_Start event will be fired again.
We're using ASP.NET 3.5, WebForms and MVC.
View 2 Replies
Aug 19, 2010
I'm looking at automating some reporting that I'm going to be generating. I want the reports to be generated and emailed at a particular time every day. These times will vary, and so will the types of reports.I was wondering if there were any better solution to creating a routine with a timer that executes at a set time every day? If I include this class and routine in the Application_Start of my Global.asax, will it always be running, or is there some awesome EventListener that I'm not aware of?
View 3 Replies
Oct 31, 2010
what might be best suited to place in the Application_Start and Session_Start subroutines? I know when each subroutine is called. Application_Start when the first user first accesses the web application. Session_Start when a user opens a session with the application. But what code belongs in each of these subroutines. What should the code in each subroutine do?
View 2 Replies
Sep 15, 2010
In my MVC application ,I am updating my web.config at runtime through application_start event.So, ideally it should be done only when the application is started.BUT in MY mvc application the application_start event of global.asax is being called multiple
times , even when i have not restarted the application.
Its being repetadly called when i am calling different actions , so the webconfig is repetedly updating & making my application very very slow. what's the reason & how to handle this .
View 2 Replies
Jul 15, 2010
I have class say: Public Class GlobalFA : Inherits System.Web.HttpApplication
which has been inherited from HttpApplication class and having
Public Shared MaxLoginAttempts As Integer = 0 as member variables
Now i have added below event in it i.e(Application_Start event.
Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
MaxLoginAttempts = 100
end sub
Now i am access this variable on my xyz.aspx.vb page but i am geeting 0 value .
it mean application_start event is not firing .
View 4 Replies
Oct 28, 2010
I am getting user information from Ldap server.Because of this I am getting performance issues in my application. For this I have a created a method in Application_start event then everything is working fine, my problem is when ever user adds in Ldap those information is not getting reflected in the application because we have implemented this in application_start event.SoI want to keep this method in application_start only and I want to update the new users also in my application how to do this.If I write same code in session_start event then if user clicks on user maintenace tab then processing the request message is coming. So I want to be keep in Application_start event and also it should update the latest user information in the application.
View 1 Replies
Dec 20, 2010
We have a component that needs to sit in asp.net that creates a listening socket on a well known port.The reason we have the socket is the asp.net need component needs to received events from external services and other technologies weren't quick or flexible enough.We start the socket listening in application_start,and close the socket in application_end. The issue is if we are receiving http requests to the web site, and modify the web.config, the application_start event is called before the application_end is called,so we cannot open the socket (we get an error about duplicate socket being open). We dont have a reference to the original socket in the application_start after the web.config change, so we cannot shut it down from there.
View 3 Replies
