Classic ASP Error - The Page Cannot Be Found?
Jan 6, 2011
I know i'm not in the right spot to post this. I hope someone experienced this before and can help.I have an old classic asp website. I try to run it with localhost/foldname/default.asp but it gives me 404 error:
[Code]....
a) I'm running XP 64 bitsb) Classic ASP is checked in Add/Remove Windows Component
c) "Active Server Pages" is set to Allowed in IIS Web Service Extension
d) .asp is mapped in the Application ConfigurationNo luck so far!!! Accessing a HTML file within the same folder work, but not the ASP page.
View 1 Replies
Similar Messages:
Jul 17, 2010
I create mvc2 application.
i create controllers for user name UserController.cs inside of all function related user are in
in views folder i create one more folder name User.
all user forms are there
everything working fine i can create, update ,delete user.
but now i am getting error.
when i run my code.. got below error...
An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.
i tried with cleaning and re-building code... iisreset
clean temp file, cleaning app_browser folder..
View 4 Replies
Aug 19, 2010
How do i handle 404 page not found?
View 5 Replies
Feb 19, 2010
I have a page that have a combobox and a button, when the user select something from the combobox and hit the Go button they are redirected to the page with the desired variable.
[Code]....
The problem appears when the page was not used from more than 20 minutes and the user select something from the comboBox and hit Go Button the receive a page indicating the Error 404.The only thing that I try is to use a javascript code that Refresh the page every 15 minutes but is not nice to see a page refreshing without a reason.If someone can have a way to identify what can be done in this problem, Its going to be a huge help.
View 2 Replies
Dec 14, 2010
I have a CentOS 5.x server running Mono 2.8.1 and mod_mono 2.8 with apache2.
Every time I deploy a site from visual studio 2010 to my server by ftp, and navigate to the site, I get a 404 not found error page.
Sites in other subdomains (virtual hosts) are not affected.
Performing a restart of httpd using /etc/init.d/httpd restart fixes the problem, and I can view my ASP site again. Obviously restarting the entire httpd process is less than adequate.
My guess is that this is similar to application domains in IIS. Is there a way to 'recycle' and app domain in mod_mono? Can I set this to happen on deployment?
View 2 Replies
Aug 16, 2010
I have a website which has both html and aspx pages. for aspx pages i have added code in customerror section in web.config and is working fine, but only in case of aspx pages. I want if somebody looks for html page which does not exist should also be taken to error page.[URL]( What about html pages section) will only work if the site is hosted at my servers, but in my case the website is hosted somewhere else.
View 2 Replies
Feb 8, 2010
i have to create some files dynamically. those are referred in html anchor control.i want to process some requested files in asp.net worker process but IIS just intercept all these requests and show 404 page not found page. how can i avoid IIS bevaiour in such cases additionally i can not map these files extentions to IIS because i don't know there are so many???
View 1 Replies
Dec 25, 2010
In my website users can create thier own websites by making folder of thier choice like: [URL] Where the folders Pankaj and Adam are storing in database. I just want that when user after creting thier website just clicked or type the address of thier website as [URL] then if the folder with name Pankaj exists in database then the page will open otherwise it gives the http 404 page not found error. And while the address [URL] is opens then i donot want to physically create it on server. My requirement is that i want to open it by the concept of url rewriting/ Routing. Which one concept will be good for this. And can anyone provide some code with example that how can i achieve this easily.
View 2 Replies
Feb 24, 2011
I am able to display Customer records, but when I click on the details link to retrieve related orders, I am getting Resource not found error as shown below.: I can email to you my solution project to help make things clearer.I have added my code for CustomerController class
using
System;
using
[code]...
View 4 Replies
Oct 21, 2015
I have Following code in Master Page:
with 5 pages in it.
(with 4th and 5th page is inside Admin folder)
No <authorization> are given. all are open to every user.
<%@ Master Language="C#" AutoEventWireup="true" CodeFile="MasterPage.master.cs" Inherits="MasterPage" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
[Code].....
When I run the application, 1st page, second page, 3rd page I get Url on page as:
localhost:2069/TestPage/FirstPage.aspx
localhost:2069/TestPage/SecondPage.aspx
localhost:2069/TestPage/ThirdPage.aspx
theycan be accessible.
also when i click on 4th Page, I get url as:
localhost:2069/TestPage/Admin/FourthPage.aspx
and 4th page will get displayed.But..When i go back to any other page, it will throw an error
"Resource cannot be found"
with URL as:
localhost:2069/TestPage/Admin/ThirdPage.aspx
How to avoid this Error?
View 1 Replies
Jul 27, 2010
I've a web application which is running on sql state session ..
And is running well under normal conditions.
But when my application is in home page or landing page after loging to the application,
if user clears all his history and cookies and click on any menu in the application .
It is giving Internet Explorer cannot display the webpage error..
I'm not able to debug the error.. am getting the same problem even under deploying conditions.
How to handle this issue?
View 11 Replies
Apr 22, 2010
everything .net works fine, but when i try to run a .asp file i get this error: Server Error in '/xx' Application. This type of page is not served. Description: The type of page you have requested is not served because it has been explicitly forbidden. The extension '.asp' may be incorrect. Please review the URL below and make sure that it is spelled correctly. Requested URL: /index.asp Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082 is there something i need to enable?
View 3 Replies
Oct 6, 2010
I'm working on a website with legacy Classic ASP pages (being converted to ASP.NET on an as needed basis) and new ASP.NET pages. Use of IIS 7 Integrated Pipeline has been very helpful with our configuration. For example, we were able to get forms authentication working auto-magically with the classic ASP pages simply by configuring the appropriate sections of the web.config file (i.e. no changes were required to the Classic ASP pages, for more info see this).
A colleague of mine believes that custom error pages, as specified in the web.config <customErrors> section, should also be auto-magically applied to the classic ASP pages, but for our website it only works for the ASP.NET pages. Nor have I been able to find any information describing the capability of applying custom error pages to Classic ASP with the IIS 7 integrated pipeline. Is it possible to apply custom error pages to Classic ASP pages per a web.config for an website running under IIS7 with integrated pipeline? If so, how?
View 1 Replies
Jul 22, 2010
I just tested a new aspx-website and in the debug mode it works fine.
But when I publish it on the server 2003 with IIS6 then it works first and after several requests I get an error message page not found.
The page itself exists and I think that it is only unavailable on the server.
View 6 Replies
May 21, 2010
I am trying to redirect an ASPX Page to a Classic ASP Page, This is Working Fine with my Local IIS (version 5.1). OS is XPesponse.Redirect("xyz.asp?id=1234");I tried to deploy it into Windows server 2003, IIS Version 6.0 and i am getting an error"Page Cannot be Displayed. here is a problem with the page you are trying to reach and it cannot be displayed."
View 2 Replies
Mar 15, 2011
I'm attempting to access a layout page in an MVC page like this:
[Code]....
The problem is that I get this error:
he layout page "/Shared/_Layout.cshtml" could not be found at the following path: "/Shared/_Layout.cshtml".
Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Web.HttpException: The layout page "/Shared/_Layout.cshtml" could not be found at the following path: "/Shared/_Layout.cshtml".Source Error:
[Code]....
Stack Trace:
[Code]....
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.1
Not sure why this is a problem, I was referencing this page:
[URL]
View 3 Replies
Feb 23, 2010
I'm doing the samething in my two differents pc.
1) Windows 7, vs2010 rc, mvc 2rc2, .Net 3.5
2) Winodws xp, vs2008, mvc 2rc2, .Net 3.5
My Hosting is in GOdaddy IIS 7, .Net 3.5.
I created a new project in both computers, i build it, i copied the 3 dll's files in the bin folder (System.Web.Mvc, System.Web.Routing, system.Web.Abstractions), and i publish them...., i go to my website [URL] both same problem "Page Not Found"
I tried many blogs...many advices...nothing yet...
View 9 Replies
Jun 3, 2010
I am attempting to call an ASP.NET page from a classic ASP page on the same machine. The ASP page is located in c:inetpubwwwroot. The ASP.NET page is located in C:InetpubwwwrootWebServiceWrapper
Here is the ASP code to call the page:
Dim objHttp, strQuery
set objHttp = Server.CreateObject("Msxml2.ServerXMLHTTP")[code]....
The ASP.NET code, which calls a web service and sets a cookie, works if I call it from the browser directly. However, using the Msxml2.ServerXMLHTTP object, it does not. The cookie is not generated and there is no error. There are no events in Event Viewer.The ASP.NET page was developed in Visual Studio 2005, .NET 2.0. Changing the POST to a GET has not helped.
View 3 Replies
Jul 29, 2010
I have an asp page with an input/text field and an anchor/href that links to an aspx page. What I want is to populate the label control on my aspx page with the value entered in the input/text field. How would I do that?
View 1 Replies
Apr 21, 2010
I am using StructureMap with ASP.NET MVC. I have a requirement where I need to show a ReportViewer and for that I am using a classic ASP.NET page. The problem is when I am trying to redirect from the action I am getting following issue:
The IControllerFactory 'StructureMapControllerFactory' did not return a controller for the name 'Reports.aspx'.
View 2 Replies
Jan 31, 2011
I would like to include the asp clasic file in asp.net page. I am looking for something similar to :
<!-- #include file="inc.config.asp" -->
View 6 Replies
Sep 4, 2010
The object cannot be deleted because it was not found in the ObjectStateManager error ...
[Code]....
View 1 Replies
Apr 9, 2010
I have a classic ASP page that connects to the mySQL server with the following code:
Set oConnection = Server.CreateObject("ADODB.Connection")
Set oRecordset = Server.CreateObject("ADODB.Recordset")
oConnection.Open "DRIVER={MySQL ODBC 3.51 Driver}; SERVER=xxx.com; PORT=3306; DATABASE=xxx; USER=xxx; PASSWORD=xxx; OPTION=3;"
sqltemp = "select * from userinfo WHERE emailAddress = '" & theUN & "'"
oRecordset.Open sqltemp, oConnection,3,3
if oRecordset.EOF then
...
However, i am unable to find anything to connect to mySQL in ASP.NET (VB.NET). I have only found this peice of code that does not seem to work once it gets to the "Dim conn As New OdbcConnection(MyConString)" code:
Dim MyConString As String = "DRIVER={MySQL ODBC 3.51 Driver};" & _
"SERVER=xxx.com;" & _
"DATABASE=xxx;" & _
"UID=xxx;" & _
"PASSWORD=xxx;" & _
"OPTION=3;"
Dim conn As New OdbcConnection(MyConString)
conn.Open()
Dim MyCommand As New OdbcCommand
MyCommand.Connection = MyConnection
MyCommand.CommandText = "select * from userinfo WHERE emailAddress = '" & theUN & "'""
MyCommand.ExecuteNonQuery()
MyConnection.Close()
I have these import statements also:
<%@ Import Namespace=System %>
<%@ Import Namespace=System.IO %>
<%@ Import Namespace=System.Web %>
<%@ Import Namespace=System.ServiceProcess %>
<%@ Import Namespace=Microsoft.Data.Odbc %>
<%@ Import Namespace=MySql.Data.MySqlClient %>
<%@ Import Namespace=MySql.Data %>
<%@ Import Namespace=System.Data %>
The error is as follows:
Compiler Error Message: BC30002: Type 'OdbcConnection' is not defined.
Source Error:
Line 121: "OPTION=3;"
Line 122:
Line 123: Dim conn As New OdbcConnection(MyConString) '<--error line
Line 124: conn.Open()
Line 125:
EDIT: GOT IT WORKING USING THIS WAY
Dim MyConString As String = "DRIVER={MySQL ODBC 3.51 Driver};" & _
"SERVER=xxx.com;" & _
"DATABASE=xxx;" & _
"UID=xxx;" & _
"PASSWORD=xxx;" & _
"OPTION=3;"
Dim conn As OdbcConnection = New OdbcConnection(MyConString)
conn.Open()
Dim MyCommand As New OdbcCommand
MyCommand.Connection = conn
'MyCommand.CommandText = "INSERT INTO tablename VALUES("val1","val2","val3")"
'MyCommand.ExecuteNonQuery()
conn.Close()
AND WITH THE mysql.data.DLL IN PLAY
Dim MyConString As String = "DRIVER={MySQL ODBC 3.51 Driver};" & _
"SERVER=xxx.com;" & _
"DATABASE=xxx;" & _
"UID=xxx;" & _
"PASSWORD=xxx;" & _
"OPTION=3;"
Dim conn As New MySqlConnection(MyConString)
conn.Open()
Dim MyCommand As New MySqlCommand
MyCommand.Connection = conn
'MyCommand.CommandText = "INSERT INTO tablename VALUES("val1","val2","val3")"
'MyCommand.ExecuteNonQuery()
conn.Close()
View 3 Replies
Jun 21, 2010
I have a classic ASP page that requires two values from a form. These values are posted to the ASP page from another pages form. I would like to pass these values to the ASP page without the need for a form for testing. Is this possible?This is what the asp page looks like:
<%@LANGUAGE="JavaScript"%>
<%
var someID = new String( Request.Form("someID") );
var anotherID = new String( Request.Form("anotherID") );
%>
Ideally I would like to have VS pass values to 'someID' and 'anotherID' when debugging is started.
View 4 Replies
Jun 2, 2010
Many years ago I built a website for a customer in classic asp that uses RomanCart as the payment gateway. This has worked very well, but ive now been given the task of rebuilding the site under .net 3.5 the old site used a submit button that set the action to the romancart url and setup some hidden field values. I want to duplicate this behaviour in the .aspx page from the onclick event of a button. Heres the origianl code from the classic asp page.Can Anyone give some some pointers in converting this to c#?
View 13 Replies
