I just tested a new aspx-website and in the debug mode it works fine.
But when I publish it on the server 2003 with IIS6 then it works first and after several requests I get an error message page not found.
The page itself exists and I think that it is only unavailable on the server.
I have a textbox, with a RequiredFieldValidator and a ValidatorCalloutExtender. The calloutExtender comes up when there is no text in the textbox, but it does not display the error message from the RequiredFieldValidator. I tested this code in a test app, and it worked. It may have something to do with the content containers? These controls are inside of a web user control, which are inside a Telerik RadDock. The parent page also uses a MasterPage. Here is my code from the usercontrol which contains the validator:
<%@ Control Language="C#" AutoEventWireup="true" CodeBehind="WebUserControl1.ascx.cs" Inherits="WebApplication1.UserControls.WebUserControl1" %>
<%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit"
[code]...
I placed 2 requiredfieldvalidators in my page (well, actually, more like a dozen of them, but only these 2 behave this way) and can not seem to figure out why the error message will not be displayed. The validation function works (the processing code is not run and focus is returned to the first field that fails validation) but no error message.
[Code]....
When a user opens the my web app then immediately opens clicks on a button to open another, related page (page opens in a separate window (users choice) via a button), the new page opens fine. If a user open the my web app and waits a bit (usually abouta minute) before clickin on the button to open another page, they get the 'Page Not Found' error. When I run this app locally (local host), I have no problems.the server can handle, why does this happen only after the user waits to open the other page.
<httpRuntime maxRequestLength="2097151" executionTimeout="3600" useFullyQualifiedRedirectUrl="true"/>
<sessionState mode="InProc" timeout="480" />
when record is deleted in gridview when we press backspace button the record is back, when click that record the error message no records at rows 0 is found
View 2 RepliesI'm very, very new to the asp.net world and I was running through the create the movie db tutorial that is located in the learn asp.net mvc section of this website. Everything is fine until I create my home controller and edit it like on the site. Here is the first part of the code I have that has the error in it:
privateMoviesDBEntities _db = new MoviesDBEntities();
This is all on one line in visual studio but i get an error saying that the type or namespace 'MoviesDBEntities' could not be found (are you missing a using directive or an assembly reference?). I have checked the spelling and I have the using MovieApp.Models; up above so if anyone has any insight that would be great.
I have also tried performing the manager contact sheet tutorial and get the same error in this section of the code.
Im running a web application in visual studio 2008..i got this error when particular page was loaded..
help me to proceed....
Server Error in '/PSS.NET' Application.
Parser Error
Description: An error occurred during the parsing of a resource required to service this request. Please review the following specific parse error details and modify your source file appropriately.
Parser Error Message: Ambiguous match found.
Source Error:
<%@ Register TagPrefix="uc1" TagName="CtrlButtonControl" Src="../../WebControls/CtrlButtonControl.ascx" %>
<%@ Page language="c#" Codebehind="SPSearchFromToDtStorLocMatTypRank.aspx.cs" AutoEventWireup="false" Inherits="Sdi.Pss.Reports.SP.SPSearchFromToDtStorLocMatTypRank" %>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN" >
Source File: /PSS.NET/Reports/SP/SPSearchFromToDtStorLocMatTypRank.aspx Line: 1
Version Information: Microsoft .NET Framework Version:2.0.50727.3615; ASP.NET Version:2.0.50727.3614
I used to be able to view the pages of my ASP.NET 3.5 website locally via the 'View in Browser' facility. However, this no longer works (for any page). All I get is a 'HTTP 404 Not Found' error message.
Where might I have screwed things up?
Can somone help me with this error?
Configuration Error
Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.Parser Error Message: Default Role Provider could not be found.Source Error:
[Code]....
Source File: C:inetpubReaganweb.config Line: 43 Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927 here is my web.config code for the provider
[Code]....
I've just setup a new site on my IIS6 and I'm experiencing the following problem:
I can run normal HTML pages, but no .aspx files. If I call the aspx page directly I get a 404 - file not found - error message. This only happens with .aspx files.
I open the page yesterday, it is working fine,, but today I am getting this error...Parser Error Message: Ambiguous match found.Source Error:
Line 1: <%@ Register TagPrefix="NetMenu" Namespace="CYBERAKT.WebControls.Navigation" Assembly="ASPnetMenu" %>
Line 2: <%@ Page language="c#" Codebehind="ClientDetails.aspx.cs" AutoEventWireup="false"
[code]...
I found this very useful [URL]....
How to display No Match Found when there is no data with the entered initials.
Ex: zz
Output No Match Found
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
when I put a break point i get this error message:
Error 1 The type or namespace name 'X509Certificate' could not be found (are you missing a using directive or an assembly reference?) D:UsersatttDesktop
fre
etetrtDefault.aspx.cs 7 53 D:...attt
When I add an update command to my page and run the page I get this error message
Server Error in '/MYApplication.
Incorrect syntax near '-'.Must declare the scalar variable "@recnum".
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '-'.Must declare the scalar variable "@recnum".
Source Error:
[Code]....
Stack Trace: [Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082
Here is my code
<asp:SqlDataSource
ID="SqlDataSource1"
runat="server"[code]....
All the examples and websites i have looked at redirect a user to the error.aspx page when an error occurs. How do you just display a friendly error message on the page the user is viewing saying something like "Sorry unable to do whatever" I've tried using a try catch block on my class that executes a stored procedure and put another try catch on the controller, but this does not work and i still get the default error message (System.InvalidOperationException was unhandled by user code) My code is below:
[Code]....
So how can i just return ViewData["SqlError"] message in page.
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
I know i'm not in the right spot to post this. I hope someone experienced this before and can help.I have an old classic asp website. I try to run it with localhost/foldname/default.asp but it gives me 404 error:
[Code]....
a) I'm running XP 64 bitsb) Classic ASP is checked in Add/Remove Windows Component
c) "Active Server Pages" is set to Allowed in IIS Web Service Extension
d) .asp is mapped in the Application ConfigurationNo luck so far!!! Accessing a HTML file within the same folder work, but not the ASP page.
I create mvc2 application.
i create controllers for user name UserController.cs inside of all function related user are in
in views folder i create one more folder name User.
all user forms are there
everything working fine i can create, update ,delete user.
but now i am getting error.
when i run my code.. got below error...
An error occurred during the parsing of a resource required to service this request. review the following specific parse error details and modify your source file appropriately.
i tried with cleaning and re-building code... iisreset
clean temp file, cleaning app_browser folder..
I am getting this error after uploading my web app to my Rackspace box.
CS0246: The type or namespace name 'User' could not be found (are you missing a using directive or an assembly reference?)
It's odd because it works fine on my local computer where I do development. The actual line of code is:
public User user = new User();
I am using C#.
I have a serious problem with "Error on Page". The error message points to line number 939, char 13. In my code behind (C#) in line number 939 is only an obsolete method found which is no longer called. The aspx file has only 339 lines. What the heck is line number 939?The Webapplication allows a special user group to change some group memberships for members of another user group in Active Directory. The App handles 3internal DataViews derived from corresponding DataTables as DataSource for 3 GridViews and some other internal lists with objects (List<obj>).
It uses windows authentication to get current users credentials and his membership in the "Operators" group. This credentials will be passed-through to allow the process managing group memberships in active directory.After starting the App in browser it seems to work fine. But after an indeterminated time it doesn't longer respond. After each click on buttons (or link buttons) you only can see the message "Error on Page" in the browsers status bar below.I played with session timeout, storing the DataTables in session variables, without success.
Last week I found this article here: [URL]" and I addedEnableEventValidation="false" ViewStateEncryptionMode="Never"
to Page declaration. However, at some point the the server does not respond. Each time the worker process on webserver recycles it seems the application turn to wrong state. Might be important: All controls including GridViews are embedded in an AJAX UpdatePanel. How to get a better error message? Debugging is enabled and Custom Error handling On, Off or Remote Only brings the same result as described.
How do i handle 404 page not found?
View 5 RepliesI have a page that have a combobox and a button, when the user select something from the combobox and hit the Go button they are redirected to the page with the desired variable.
[Code]....
The problem appears when the page was not used from more than 20 minutes and the user select something from the comboBox and hit Go Button the receive a page indicating the Error 404.The only thing that I try is to use a javascript code that Refresh the page every 15 minutes but is not nice to see a page refreshing without a reason.If someone can have a way to identify what can be done in this problem, Its going to be a huge help.
I have a CentOS 5.x server running Mono 2.8.1 and mod_mono 2.8 with apache2.
Every time I deploy a site from visual studio 2010 to my server by ftp, and navigate to the site, I get a 404 not found error page.
Sites in other subdomains (virtual hosts) are not affected.
Performing a restart of httpd using /etc/init.d/httpd restart fixes the problem, and I can view my ASP site again. Obviously restarting the entire httpd process is less than adequate.
My guess is that this is similar to application domains in IIS. Is there a way to 'recycle' and app domain in mod_mono? Can I set this to happen on deployment?
I have a website which has both html and aspx pages. for aspx pages i have added code in customerror section in web.config and is working fine, but only in case of aspx pages. I want if somebody looks for html page which does not exist should also be taken to error page.[URL]( What about html pages section) will only work if the site is hosted at my servers, but in my case the website is hosted somewhere else.
View 2 Replies