Configuration :: Error While Connect To The Host

Aug 28, 2010

i have a site on internet. last week i work on that site at my work and there is no problem. now today i try to connect my database on the host ş got error.The error is:

An error has occurred while establishing a connection to the server. When connecting to SQL Server, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft Sql Server, Error:53)

i am using sql server 2008 my operating system is windows 7.what can be the problem in my local? i enabled both tcp and named pipes also i start sql browser but it is failed again

View 2 Replies


Similar Messages:

Databases :: Sql.data.dll Connect Error Godaddy Host?

Feb 12, 2010

sql.data.dll connect error godaddy host

View 1 Replies

Installation :: Cannot Connect To Local Host Error When Creating Web Pages In Web Developer 2010

Jun 4, 2010

I'm new to ASP and was hoping to get some hands-on experience of web development, but have been having trouble getting started.

I followed the instructions in the [URL] setup video, and downloaded and ran the plaform installer. I noticed that the "Web Platform" section of the installer was didn't have the "Web Server" section at the top, as shown on the instruction video [URL] but it otherwise seemed to install ok.

When I tried to follow the tutorial videos on [URL] using MS Visual Web Developer 2010, I am unable to debug the application. The web page it loads just says: "The webpage "localhost:xxxxx" cannot be found" (where xxxxx is the five digit random port number).

I've tried uninstalling Visual Web Developer, and the various Microsoft .NET and SQL Server using the Vista uninstall functionality of the control panel (as bet as I could -I'm not sure if there was something I missed), and then re-installing, but I still get the same problem.

I've tried to find a solution on some developer forums, and I noticed there are posts relating to webdev.webserver.exe relating to the error message I've been getting. However I haven't been able to find any info on this for VS 2010.

I've checked, and I don't have webdev.webserver.exe in C:Program FilesCommon Filesmicrosoft sharedDevServer or in C:WindowsMicrosoft.NETFrameworkV2.0.50727, although I do have WebDev.WebServer20 and WebDev.WebServer40. inC:Program FilesCommon Filesmicrosoft sharedDevServer 10 (I'm not sure if one of these is the equivalent files for VS2010.)

I've also made Internet Explorer my default web browser, since some of the forum posts mention this. My firewall is on, but I don't get any error messages relating to the firewall when I run the app. However, I wasn't sure whether there was a particular program I should add to my "allowed" list before running.

I ran the diagnostic tool: [URL] and I get the following output:

THE FOLLOWING SCRIPT will check to make sure that .NET Framework 3.5 is installed properly and will tell you what is not configured appropriately WINDOWS VERSION: 6.0.6002 POTENTIAL ERROR: REGISTRYDUMP: reg query "HKLMSOFTWAREMicrosoftNET Framework SetupNDPv2.0.50727" /v "SP"

HKEY_LOCAL_MACHINESOFTWAREMicrosoftNET Framework SetupNDPv2.0.50727 SP REG_DWORD 0x2

ERROR: NetFx2.0 SP1 is not installed POTENTIAL ERROR: REGISTRYDUMP: reg query "HKLMSOFTWAREMicrosoftNET Framework SetupNDPv3.0" /v "SP"

HKEY_LOCAL_MACHINESOFTWAREMicrosoftNET Framework SetupNDPv3.0 SP REG_DWORD 0x2

ERROR: Netfx3.0 SP1 is not installed

I presume there's been some problem with installation and setup. However, I'm not sure what exactly I need to re-install (if anything) to fix it.

View 11 Replies

Configuration :: Way To Host Wep Application

Mar 26, 2010

I had developed the 3 tire Web application, so i need to deploy the application to the customer public server.The public server has the Windows Server 20003 R2, how can i deploy my application

View 1 Replies

Configuration :: Host Mvc 2 Application In IIS 7.5

Aug 30, 2010

I have searched high and low on the internet for clear instructions on how to host an mvc 2 application in IIS but without luck. It seems to be from my research that it is anything but straightforward to do.

Imagine i create a new mvc 2 project in visual studio 2010. I want to host this locally on my own IIS server.

View 6 Replies

Configuration :: How To Configure An IIS 7.0 Server To Host An MVC App

Jun 29, 2010

I have developed my first MVC application, which runs perfectly on my local development box.

However after publish to a server running IIS 7 I cannot get the application to work?

1. I created the application in IIS 7

2. Changed authentication to use Forms Authentication instead of Anonymous.

But this exception is generated - shown in browser:

[code]...

View 1 Replies

Configuration :: Iis 7 - How To Host The Website At The Root

Jul 9, 2010

I've followed this link [URL] to configure my application on iis7.

- I've published it

- create a folder in inetpubwwwrootMyApp

- I've created my virtual directory to point on MyApp

but then to log on it, I need to point on http:\localhostMyApp but i would like to point on http:\localhost

View 1 Replies

Configuration :: How To Publish Project And Put It In Host

Dec 18, 2010

I want to publish my project, and upload it to my host but I don't know how to to do that to convert my codes to .dll to protect it ? to take a copy of my database and upload it to the host and bind it all steps needed to complete that successfully

View 2 Replies

Configuration :: Publish Site To Web Host?

Sep 1, 2010

I have set up a development server (Win Server 2003) with IIS 6.0. I have the .NET Framework 2.0 and 4.0 installed. My web host (where my app will run) has .NET 3.5. Will it work for me to set up my development server with 4.0 in IIS, and then create a new website in Visual Studio (2010) that targets the .NET 3.5 framework (aimed at my development server)? want to be able to publish the site to my web host (with .NET 3.5).

View 2 Replies

Configuration :: Emailing Using Different Smtp Host?

Aug 14, 2010

i have a web application in which i have a emailing module. in which i am currently using gmail smtp host but i need to allow any or all smtp host account to be used for sending emails like yahoo , hotmail etc.

for sending a mail i need to have port no , .Host, and .EnableSsl there r many many smtp host used for emailing . how do i configure my emailing modue to accomodate all the possible smtp host and set their host , port & enable ss1 so that any one using the emailing module can set their smtp host and use the module for emailing

View 1 Replies

Configuration :: Win2k8 R2 X64 Host Setup?

Mar 15, 2010

I've just signed up for a MaximumASP MaxV virtual server hosting account. I can remote desktop into the box and am wondering how to configure it to host my website. I do not want to enable any features which I don't need. All I need is to be able to run an ASP.Net 3.5 Web Application, SQL Server 2008 & URL re-writing. What is the minimum set of windows features I need to enable? In what order should features and programs be installed? How will I deploy and configure my web app? How do I configure multiple domains to point to my application?

View 1 Replies

Configuration :: Publish Web Pages To Host?

Jun 8, 2010

can u plz tell me how can i publish my web pages to host it on registered website?

View 2 Replies

IIS Configuration :: How To Host Windows Application

May 7, 2015

I running MS-Access desktop application, i would like to host it to web through ASP.Net (Only report purpose). regular data we keying in through desktop. is it possible for host through crystal report?

View 1 Replies

IIS Configuration :: To Host Website In Server

May 14, 2013

I have created a asp.net website.At present its wokng in local host.How to host my site in IIS.What are the steps to be followed

View 1 Replies

Configuration :: Host Headers In IIS/ Unable To See Web Page?

Mar 1, 2011

I am a bit new to asp.net and I have been trying to host a asp.net site on my local machine (Win2k3) with a host header.

I initally created the web site with default (none) host headers on the port 800 .

Later on I edited the default header from the web site properties tab and gave a header something like this - test.site.com

I made the entry in the host file for this header.

I try accessing the site by hitting http://test.site.com but i dont see my web page, instead i see some internet url.

I know that the host header has been setup well because i can ping it successfully from the cmd. Also, i have made changes in the browser to by- pass the proxy server.

View 2 Replies

Configuration :: Cannot Access To Admin Folder In Web Host

Jan 27, 2011

We have created an ASP.NET ( 3.5) application is configured to use FORM authentication and thus it has such a following items in Web.Config :

<location path="~/Admin/Default.aspx">
<system.web>
<authorization>
<allow roles="Manager,Member" />
<deny users="*" />
</authorization>
</system.web>
</location>
<location path="~/Admin/MyAccount.aspx">
<system.web>
<authorization>

the application runs OK on local web server box. Our ASP.net application is able to access Admin folder in local IIS application folder and its subdirectory. However, once uploaded to remote web host , user can login but when user wants to use any pages in ~/Admin subfolder, we get an exception that essentially states that access to the sub-directory is denied.

View 3 Replies

Configuration :: Deploying Web Reference On Host Server

Mar 9, 2010

I've added a web reference locally which looks up post codes. All works ok locally. Now I just want to deploy this to my web space. There is a app_WebResources folder with various files that were created when I added this. Basically what I want to know is How do I get all this to work online?

View 7 Replies

Configuration :: Running ASPNET_REGSQL.EXE On A Shared Host

Jun 28, 2010

I want to be able to run aspnet_regsql.exe to create the membership tables on a shared host. But since, it is a shared host, I can't do that. I however can create the tables on my box. How do I copy them over?

View 4 Replies

Configuration :: System.OutOfMemoryException In Shared Web Host?

Oct 14, 2010

I have a website that I have run for years running a custom built CMS. It has had no problems ever. I decided to create a demo (temporary url) of the CMS using the exact same website. Only people I give access to would be able to login and change it, so it basically is not in use for the most part.

I tried this demo site the past few days, and I noticed that I kept getting System.OutOfMemoryException errors. I would wait for an hour or so, then it would work. Next day, same thing.

What could explain this? 2 exact same websites....one that is used all the time (no memory issues), and one that is hardly ever used (memory issues). Doesn't really make sense to me.

View 6 Replies

Configuration :: How To Host Wcf Service In Hosting Server

Sep 1, 2010

I have a domain(www.fortunebells.com) in hosting server zetnetindia.I have created wcf service and added service reference in my project.I want to host the service reference in the domain. how can i do this?

View 1 Replies

Configuration :: IIS 7 MVC3 App Add Host Name Give HTTP 404?

Jan 18, 2011

I have attempted to deploy an asp.net mvc3 app on IIS 7 on a windows server 2008 machine. All is well if I don't add a host name (i.e. domain name). I can access the site locally, and my friend can caccess it externally. I can browse to other links in my site, etc... It all seems working fine.

However, if once I add a host name, I get the http 404 error. What should the configuration be like?

View 4 Replies

Configuration :: Get Ajax Ext To Work On A Host Server?

Aug 8, 2010

How do i get ajax ext to work on a host server? Ihave a modalpopup that works fine on my PC.I uploaded the webpage with ajax ext and also the ajaxtoolkit.dll into the bin dir and the bin dir of the webisite to see if anything works.

View 2 Replies

Configuration :: ReportViewer Doesn't Work On Host?

Mar 11, 2010

I have a small project which works fine on my development environment but whenever I uploaded my project, reportviewer doesn't show a thing! Not even an error message! I've uploaded the 3 dll's needed on bin folder.

View 1 Replies

Configuration :: Avoid Modifying The Host File?

Mar 25, 2011

When we use IIS for our aspnet 3.5 web application, it seems like each computer that wants access to this file needs to add the IP Address to the host file before we can navigate to the site. Is there a way to avoid using the host file. When this application goes to production, it should be able to be acesses by hundreds of computers and I really don't think forcing each computer to modify the host file is a good solution at all.

View 6 Replies

Configuration :: Connecting To Server Using Local Host?

Mar 27, 2010

I am having 5 systems connected through LAN.Now I am creating a web application in server and want to retrive that web application through all the systems so that other people can able to access it andwork with different pages in the application.Is this possible?If yes pls send me the steps how to do that?Same with database also.Pls respond me ASAP.

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved