Configuration :: Emailing Using Different Smtp Host?
Aug 14, 2010
i have a web application in which i have a emailing module. in which i am currently using gmail smtp host but i need to allow any or all smtp host account to be used for sending emails like yahoo , hotmail etc.
for sending a mail i need to have port no , .Host, and .EnableSsl there r many many smtp host used for emailing . how do i configure my emailing modue to accomodate all the possible smtp host and set their host , port & enable ss1 so that any one using the emailing module can set their smtp host and use the module for emailing
View 1 Replies
Similar Messages:
Jan 17, 2011
Firstly, I'm a newbie to ASP.net, but have around ten years of ('classic') ASP and VB6 experience.I have spent the last 12 hours or so googling for a solution to this problem, so it's nothing obvious (to myself or anyone else I can find talking about it, at least). Things I have ruled out so far include:1) Lack of SMTP server (fixed)2) Firewall issues3) Web.config <mailsettings> directivesI am developing my app locally (VS-2010, Windows 7 Premium ). When I kick off my application containing a form with the PasswordRecovery control in it, and run the password recovery control, I get the error:
[Code]....
This I figured is because I am running Windows 7, which doesn't have IIS7.5 (and thus an SMTP server) running by default. So I enabled IIS 7.5 in component settings, and lo and behold there it was. However there was no SMTP server included (those kind folk at Microsoft like to randomly remove things in system upgrades).So I dug around and installed a free smtp mailserver "hMailServer", and set it up with a the relay mail server address I use with my O2 email, with default credentials.I ran the test and it confirmed that I was indeed reaching the server OK. It also said I could therefore reference Localhost as my smtp server.I also realised I was missing the web.config <mailsettings> directives, so included (under <system.net> <mailsettings>):
<smtp deliveryMethod="Network" from ="zenid@here.com">
<network host="localhost" defaultCredentials="true" port="20" />
</smtp>
[code]...
View 11 Replies
Nov 5, 2010
The question: Is it possible to configure multiple SMTP servers or update the SMTP object server information at runtime?
Description of problem: The site I'm working on has a few pages which send emails. Our site is using Gmail so even though it's a custom domain our email is sent out though Gmail SMTP servers.
Some emails come from the system and some emails come from users in certain groups. I have an SMTP server configured with the admin email for the system e.g. admin@mysite.com This works fine and when I get the email it shows from admin@mysite.comOne of our user groups let's call it "groupA" has an email configured on our domain i.e. groupA@mysite.com When I send the email and specify a from address for the MailMessage object as groupA@mysite.com it still shows up in my outlook as coming from admin@mysite.com I did a little further testing and if I specify both the from address and the ReplyTo as groupA@mysite.com it will show as From=admin@mysite.com but when I choose reply in outlook it shows groupA@mysite.com My best guess is that Gmail is overwriting the From address with the SMTP user to prevent email spoofing.
I found this: http://www.systemnetmail.com/faq/4.1.aspx but it won't work for me since group A, B, and C all need to send emails from the same page.
View 1 Replies
Nov 16, 2010
Is there a way to check smtp host status in ASP.NET.
View 1 Replies
Jun 1, 2010
When I first published my site, I tested it using my gmail account and worked like a charm first try (a rare feat for me ;) ). Now, I'd like to finish it up by having it send the emails from the account at the host. No joy... I asked the host if I had misunderstood the rather unhelpful info in the control panel and they advised that in my web config I should change:
[code]....
View 2 Replies
May 16, 2012
I want to send email thought asp.net page for that I need to find SMTP Host and port number below is my code
Dim EMail As New MailMessage
EMail.From = New MailAddress(Emailtaxebox.Text)
EMail.[To].Add(New MailAddress("sa@gmail.com"))
EMail.Subject = Firstnametextbox.Text + lastnametextbox.Text + "Registerd"
EMail.Body = " This is content "
EMail.IsBodyHtml = True
[code]....
how to find SMTP port and host name ? I used default one its gives me error.No connection could be made because the target machine actively refused it.
View 1 Replies
Apr 20, 2012
{"Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host."}
I get the above error when sending email...
View 1 Replies
Jun 25, 2010
I've been running a customer's webapplication using automatically generated email for some time, being hosted on our company's web server. Send mail was done using the System.Net.Mail API using a 3rd party SMTP server. The configuration has been done in the web.config in the system.net section, something like this:
<system.net>
<mailSettings>
<smtp>
<network host="mail.jazzforum.at" userName="myUsername" password="myPassword" port="25"/>
</smtp>
</mailSettings>
</system.net>
Everything worked fine until we had to migrate to another hosting service; since then, send mail didn't work any longer with symtomatic "timeout" exceptions. We also tried using gmail and changing/omitting explicit port number specification, without any success. The server is running IIS 6 (Windows Server 2003 R2).
View 4 Replies
Jul 19, 2010
Does anyone know what the smtp mail configuration settings are that is needed in the web.config file to send outgoing mail through a form in ASP?
View 2 Replies
Mar 8, 2010
i am working on a personal website, so obviously it's not a company website which have exchange server or anything like that
I know how to setup SMTP but what details should i give for SMTP service ? i mean my yahoo/hotmail/gmail account will work, setting up SMTP is really important for the website i am working on to recieve and send e-mail how to do that for a personal website when there is no exchange server ?
View 4 Replies
May 29, 2010
i have error during sending a email from my *. aspx page i have error snapshot bellow
View 3 Replies
Mar 18, 2010
i need to encrypt the SMTP settings for my web site, i tryed the aspnet_regiis.exe pe... but i got an error this is not a valid virtual dir. i have the website on the C drive on my development machine, i have encrypted the connectionsettings via .net code but cant finde a solution for the smtp node can i encrypt the smtp in development pc or it hacse to be deployed first?
View 5 Replies
May 16, 2010
I am adding a 2nd web site to our pubic server and am noticing the SMTP delivery trying to use the default SMTP Virtual Server which is set up for the 1st web.
I created a 2nd virtual server with new smart host and credentials for the new site but need to modify the config file.
I tried using the host name = smtp virtual server 2 name.
Both webs use relay to a host for delivery
Here is my config file
<mailSettings deliveryMethod="Network">
<smtp from="admin@xyz.com">
<network host="xyz.com" />
</smtp>
</mailSettings>
I figured it out. Sometimes you just have to ask someone the question. I changed the network to IP address 192.168.56.11 instead of name of server.
ie <network host="192.168.55.11" />
View 1 Replies
Aug 26, 2010
iam using asp.net 2.0 with c#.net.
in my application when client completes its shopping email will goes to user this works fine when there is internet connection is working fine, if there is some problem in internet connection if one mail stops then all the mails will be stopped even now internet works fine,
how to resend the emails using smtp server, is there any option to resend the emails automatically when internet works fine.
View 2 Replies
Aug 1, 2010
I'm having trouble sending messages through ASP. I'm using the same settings I'm using on another Web App sitting on the same server in the same network, and trying to send through the same Exchange Server.
[Code]....
They work fine for the one app, but the other app gives me a relay error. Could this be because I'm using it on a separate domain? The one that works is "visitmychurch.tv" the other is "insidehcc.com".
View 6 Replies
Oct 9, 2010
I'm using one XP with SP 2 as my local Laptop PC . Its IIS has one default web site, of course, which is the site I'm working on. When some feature is finished I deploy it to my "production" site which is hosted somewhere else. Very common situation, I guess. This app uses email to notify customers of some particular events. Works on production, but sometimes I need to change something in the way those notifications work. Currently I have to upload the changes to "production" to check it out. Is there any way for me to set up smtp server on my local machine so I could work locally with those features?
View 3 Replies
Jan 23, 2011
I have a script that send a daily email to a list of recipients from a database. I am having a couple of emails failing to send and the try/catch/ex.message & ex.stacktrace doesn't give me enough information to show what the actual problem is. I have tried to do some smtp session logging but that seems to not be doable since I am running under Medium trust. Is their either another way to get this code to work on medium trust or another way to get detailed SMTP log info.
This is what I tried to use in my web.config
[Code]....
View 2 Replies
Oct 1, 2010
I want some tips regarding sending mail ,I want to send bulk mail from my web application in c#. so ,what should be the best code for this and also what should be the best configuration used in the smtp server. because my current system fails to send 100 mails out of 400 mails in smtp server. I aslo used theading for sending this mail in batch of 30 mails in every 20 minute but it is not working . I want solution of both in my c# code and smtp and also is there any new solution in new technology like web services or any other option .
View 1 Replies
Aug 29, 2010
I am trying to send email from my asp .net code ,it is sending email to email ids except gmail.com. all mails with gmail.com is going into my Badmail folder in inet pub folder in my local system.
SmtpClient client = new SmtpClient();
client.Host = "mail.abc.com";
client.DeliveryMethod = SmtpDeliveryMethod.PickupDirectoryFromIis;
client.Credentials = new System.Net.NetworkCredential("ab", "rr");
client.Port = 25;
string to = "arvind.abes@gmail.com";
string from = "rvsales@westrvwholesaler.com";
MailMessage mail = new MailMessage(from, to);
mail.Subject = "hello......?";
mail.IsBodyHtml = true;
mail.Body = "hi, how are you?may be this will work";
mail.Priority = MailPriority.High;
//client.EnableSsl = true;
try
{
client.Send(mail);
}
catch (Exception ex)
{
Exception ex2 = ex;
string errorMessage = string.Empty;
while (ex2 != null)
{
errorMessage += ex2.ToString();
ex2 = ex2.InnerException;
}
Response.Write(ex2.Message);
}
mail.Dispose();
View 1 Replies
Jul 31, 2010
I've written a simple webservice and am running it locally to test it out. Right now, my settings are as follows:
From [URL]
Settings When Hosted Externally
<system.net>
<mailSettings>
<smtp from="noreply@domain.net">
<network host="smtpout.secureserver.net" password="<password>" port="25" userName="noreply@domain.net"/>
</smtp>
</mailSettings>
</system.net>
I've tried these settings, and also tried explicitly setting the properties of my SmtpClient object @ run-time. On send, I receive the following exception
"Failure sending mail. Unable to connect to the remote server - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 64.202.165.58:25"
View 2 Replies
Mar 26, 2010
I had developed the 3 tire Web application, so i need to deploy the application to the customer public server.The public server has the Windows Server 20003 R2, how can i deploy my application
View 1 Replies
Aug 30, 2010
I have searched high and low on the internet for clear instructions on how to host an mvc 2 application in IIS but without luck. It seems to be from my research that it is anything but straightforward to do.
Imagine i create a new mvc 2 project in visual studio 2010. I want to host this locally on my own IIS server.
View 6 Replies
Jun 29, 2010
I have developed my first MVC application, which runs perfectly on my local development box.
However after publish to a server running IIS 7 I cannot get the application to work?
1. I created the application in IIS 7
2. Changed authentication to use Forms Authentication instead of Anonymous.
But this exception is generated - shown in browser:
[code]...
View 1 Replies
Jul 9, 2010
I've followed this link [URL] to configure my application on iis7.
- I've published it
- create a folder in inetpubwwwrootMyApp
- I've created my virtual directory to point on MyApp
but then to log on it, I need to point on http:\localhostMyApp but i would like to point on http:\localhost
View 1 Replies
Dec 18, 2010
I want to publish my project, and upload it to my host but I don't know how to to do that to convert my codes to .dll to protect it ? to take a copy of my database and upload it to the host and bind it all steps needed to complete that successfully
View 2 Replies
