I am reaching the stage where my first web application is nearing completion and I want to look at running the aspx web application. The web application is going to be run on an internal server, so that only users of the network can access the web page.I am not sure of how I get my project from my pc onto the server and go about making so that I can open it in my browser,
View 3 Repliesi am trying to upload my applicaiton on IIS5.1 version.my application uses SQL server 2005 and Membership provider. everytime i create an virtual directory and run it ,it always says that login failed for user IUSR_TPN0150 .cannot open database emp.
how can i give access to annonymous users so that my login page is shown.
i have created an application in asp.net with C# this application is running well when i run it from visual studio but when i deployed it on IIS for testing it is not working it gives me error that isThe control with ID 'UpdatePanel1' requires a ScriptManager on the page. The ScriptManager must appear before any controls that need it.i have check complete project i did forget any thing and application is running wll but on iis it gave me above stated error any body can help me and one thing is that i install IIS after installing VS2008
View 1 RepliesI have an application which was running totally fine some days earlier. The problem began since the day i have taken SVN update from server. Its saying "error 404, file not exists", it just removes application name from url & only leaves "http://localhost/1980". Whatever changes i try in web.config it has no effect. It just stick to this error. I copied my previous web.config also but no luck.I tried to comment all lines which are redirecting user to any other page in case of error also. Its happening in my colleagues copy also.
FYI, all other .net applications on my system are still running smoothly. Only this application is not running. Checked the log & it says: 2010-05-15 05:50:12 192.168.1.2 3692 192.168.1.53 2869 HTTP/1.1 NOTIFY /notify 400 - Hostname -
I have a website that appears to be "losing" the code behind bin/dll file support while the application is running. I have added an OnError event to the application and am logging it to the event viewer. At first I was getting problems with HTML and other bad input into text boxes. I have used validation and other methods to correct all of this. Now my issue is that the ASPX pages are still served, however I have custom code in the "onLoad" event and it is not being executed. This is in the "onLoad" for the master page so it is affecting the entire site. So far my fix has been to restart the website within IIS. This corrects the problem for anywhere to 24-48 hours and then it occurs again. Last night when this happened I did not recieve any new information in the event viewer log.
View 3 RepliesWe are trying to compress JS and CSS files in our application which is Running IIS 7.5. Both JS and CSS files are getting compressed
But application is not able to load these compressed .JS and .CSS files it is still referring to old un compressed files.
Just for your info Compress JS and CSS Files are at C:inetpub empIIS Temporary Compressed FilesDefaultAppPool$^_gzip_C^.
Here are the setting which i have in AppHost.config file
<dynamicTypes>
<add mimeType="text/*" enabled="true" />
<add mimeType="message/*" enabled="true" />[code]..
while running my aspx pages on local iis 5.1 of my system, it doesnot shows the images and also when i tried to login with the same credentials that i was using with visual studio2005 it always give me error of wrong credentials
View 1 Repliesi got the below error while running an application on IIS server. Error 167 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. E:iaeciaecWeb.config 48 .
View 4 RepliesI have an an intranet website running under IIS6 (under a specific port, not the default one) with a integrated windows authentication enabled and uses an application pool configured with a service account. the issue is, if I access the website using the server name with a fully qualified domain in the URL, it throws a login prompt (doesn't work even if enter my windows login credentials), but if I use the IP address of the server then it works fine. I need to do to get the URL with server name working.[URL]
View 3 RepliesI have a web application that initializes a third-party com application to perform few calculations. The website is deployed on a windows 2008 server (standard edition).
The problem I have been facing is that when I am logged in to the server (Remote Desktop Connection only as the server is not local), the com application initializes fine. But when I log-off or just close the remote desktop connection, the application doesn't get initialized. I have searched for a solution and found this:
[URL]
I created the scheduled task as I didn't know how to create the windows service (the description at
http://support.microsoft.com/kb/251192 is too confusing), and got the application to run when windows starts before even the user logs-in. But in even in this case, the application doesn't work unless the user is logged in and when I log-in, a second instance is created (with exactly the same user (admin)) and the original instance is never used.
I cannot get the application to run without logging off or atleast having to close the remote desktop connection.Is there anything I am doing wrong?
I m facing one problem which is related to Bitmap Image Actually My image is saved properly without iis server but when i run application on iis server then its give Exception "A generic error occurred in GDI+."
I m using this code-
Byte[] bytes = (Byte[])ds.Tables[0].Rows[r][1];
MemoryStream memStream = new MemoryStream();
memStream.Write(bytes, 0, bytes.Length);
System.Drawing.Bitmap origBMP = new System.Drawing.Bitmap(memStream);
System.Drawing.Bitmap newBMP = new System.Drawing.Bitmap(origBMP, 100, 150);
System.Drawing.Graphics objGra = System.Drawing.Graphics.FromImage(newBMP);
objGra.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
objGra.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.HighQualityBicubic;
origBMP.Dispose();
newBMP.Save(Server.MapPath("ImageUpload\" + r + ".Jpeg"), System.Drawing.Imaging.ImageFormat.Jpeg); //exception throw "A generic error occurred in GDI+."
newBMP.Dispose();
objGra.Dispose();
below written question :
1.) What is the name of the OS process in which App Domain resides.
2.)if suppose There are Three Windows application hosted on a same envoirment and two instance is working for each application at a Time, means now total instance are six .what will happen among the below written cases :
a.) There will be six different app domain in a single OS process
b.) There will three app domain(one for each application) in a single OS process and some Parallel thread will be executed in each app domain for another instance.
c.) There will be Three OS process corresponding to each application.
3.) If eveything will remain same except there are three web application in place of windows in point 2, will there be any change in functioning.
I host a website that has recently been upgraded from .NET Framework 2.0 to .NET Framework 4.0. Within the website, I have an instance of BlogEngine which still requires .NET Framework 2.0. Each website is in it's own application pool. My issue is that when I browse to the blog portion of my website, I receive a 500.19 error with the following information...
The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration The web.conf file that is listed in the error message is the config file that belongs to my root website which is running .NET Framework 4.0. How do I get the two websites to run together in the same website using different versions of the .NET Framework?
I have developed an web application using .net 3.5 framework and sql server 2005. Firstly, it was hosted in our intranet. Everything worked fine. Then our client wants to use this application anywhere from world. We do not have seperate domain for hosting. We have our mail server. We hosted in that server.The problem is...Now we have two LIVE IPs, i.e for internet users we are getting the IP ashttp://xxx.yyy.zz.ddd:hh and for intranet users we are getting the IP as http://xx.0.0.tt:uu. The intranet IP does not work in internet and vice-visa
View 3 RepliesAre there any instructions how to publish a web app like on webplatform?
View 3 RepliesI am running a test page on a local server that I want only to be available to comouters that are running on the LAN. However, My web page can be accessed over the internet, how can i stop this?
The page is running on a Windows Server 2003 pc using IIS 6.0
App works well on local intranet, but having problema on external access?
View 4 RepliesI've a project using windows authentication and it will be used in intranet. The client itself already have a web application in their intranet and they built it with Java (they used windows authentication too). The problem occur when they want my web application only appear within their application content section.
What should I do? I did think about using iframe but some people said it's evil. And if I'm going to use iframe, is it save? My web application will use a few pop up window/modal window and ajax.
I am having great issues trying to debug a page on a web application used internally on an intranet. When entering the page the "Security Information" Pop Up Box appears. The whole application is running under https.
To try and debug the issue, I have used Fiddler, and looked at the urls for every component, javascript, css, images, and user control components. Everything I have seen from Fiddler shows that the urls start with required https! So, I am completely confused why this message should be shown - it appears everything the page is posted back.
my application is in Intranet, but in my application mail is trigger to the user, and in that mail (outlook) user getting one link of that application so that he can update "YES"
My problem is that when the user is not in office and he is using Blackberry, at that time intranet link will not work.........
so, any solution that anybody can update through internet.
I'm working on a UI for a simple inventory system. The users will use a USB barcode scanner to retrieve an ID and then either retrieve information from the database about the scanned object or enter the new information. This will only be used within our corporate environment. I can't decide which is the best way to go with this. I would like to use this opportunity to take a crack at WPF.
View 1 RepliesI have created an ASP.NET database application using SQL Server express on one of my home network PC's. I can access SQL Server Express from the other PC's (using SQL Server Authentication) so I know it is set up ok for network access. I can run the web site on the host PC under IIS & everything works ok.
When I try to access the application from another PC using http://192.168.0.8/TestApp/Default.aspx it is not available. I can ping 192.168.0.8 & it is accessible.
why I can not view the web site from another PC on the network?
diff between internet And intranet applications design. How they are deff in authentication. What kind of authentications is possible?
View 1 RepliesI am developing an intranet application that needs to authenticate against a global catalog server (containing about 14 domains). What would I use for the connection string?
GC://DC=mb,DC=rellish,DC=com
i ma new to asp.net, i am just learning asp.net using this site and some resources from internet , internet is the only source for me. and here i have a project that should be designed by the patter of 3 tier architecture. i have an idea, but i couldn't start it, need your guidance, if i did this , it will very useful for me to get a job.these are the requirements and steps.
[Code]....
[Code]....
and
[Code]....