while running my aspx pages on local iis 5.1 of my system, it doesnot shows the images and also when i tried to login with the same credentials that i was using with visual studio2005 it always give me error of wrong credentials
View 1 Replieshow to connect an asp.net application running in local IIS to a database residing in a remote web server ?
View 2 RepliesWhen I run my application I got this error
Server Error in '/POD/POMLNT' Application.
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
What is it means , and how can i fix it ?
I am new to the asp .net (c#) technology.I got an assignment to work on a existing C# project which is alreay live and working.I have downloaded all the code files from the given FTP server on my local server.My Local Server Environment Details :OS - WinXP.NET Framework Version - 2.0 ( There are different versions on the machine i.e. 1.0,1.1,2.0,3.0,3.5 but through IIS i have enabled 2.0 because the application is developed in 2.0)Visual Studio - 2003 In the downloaded source code i did not found any solution file to open the project in Visual Studio , So i created the new project and by using the add existing elements i added all the project files to the newly created project.Am i doing right way.Will my application will work when i will upload the code on live server because the solution file would have mylocal machine configuration.Suggest me how can i proceed in long term vision so that in future i do not face any problem during application release.
View 1 Repliesi got the below error while running an application on IIS server. Error 167 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. E:iaeciaecWeb.config 48 .
View 4 RepliesI have created a virtual directory in IIS(7.0) to create web application using visual studio 2010 ultimate edition. But when i open the Browse option in visual studio to create http hosted website , it vs2010 keeps on teling me that i need to have IIS Component installed. below is the eror message;
To access local IIS websites, you must install the follwoing IIS components
You must run Visual studio in the context of an administrator account. For more information, press F1
NB:i have installed the IIS 7.0 and its running fine
OS: windows7 Home Professional
I m facing one problem which is related to Bitmap Image Actually My image is saved properly without iis server but when i run application on iis server then its give Exception "A generic error occurred in GDI+."
I m using this code-
Byte[] bytes = (Byte[])ds.Tables[0].Rows[r][1];
MemoryStream memStream = new MemoryStream();
memStream.Write(bytes, 0, bytes.Length);
System.Drawing.Bitmap origBMP = new System.Drawing.Bitmap(memStream);
System.Drawing.Bitmap newBMP = new System.Drawing.Bitmap(origBMP, 100, 150);
System.Drawing.Graphics objGra = System.Drawing.Graphics.FromImage(newBMP);
objGra.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
objGra.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.HighQualityBicubic;
origBMP.Dispose();
newBMP.Save(Server.MapPath("ImageUpload\" + r + ".Jpeg"), System.Drawing.Imaging.ImageFormat.Jpeg); //exception throw "A generic error occurred in GDI+."
newBMP.Dispose();
objGra.Dispose();
How can I test an application that I am publishing to a remote provider's IIS7 hosted site, with the VS2008 development server that is built in with VS2008 on an XP Machine?
My membership/roles work perfectly up on the remote host. On ths hosted IIS7 site when I try to access a secure directory it redirects to login, and I am able to login, however when I launch (debug - F5) from VS2008, it will provide that folder/resource, no questions asked. Same build, config, etc... nothing has changed.
I am running XP, and local IIS version installed is 5.1.
My guess is what is happening is that the new format required in the web.config is configured properly for IIS7 deployment, which is why it works remotely, but when running locally through VS2008/XP it is running with an older version on IIS and does not recoginize the new tags.
there is broblum for uploading excel sheet when my application runing on local host but there is no problum on vs enviroment . i am using the following connection string code
strConn =
"Provider=Microsoft.Jet.OLEDB.4.0;" +
"Data Source=" + path +
";Extended Properties=Excel 8.0;"
;
When I run the application using the Web Developer it works fine. However when I run it using local IIS I get the following error:
The resource class for this page was not found. check if the resource file exists and try again. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.InvalidOperationException: The resource class for this page was not found. heck if the resource file exists and try again.
Source Error:
Line 81: private void PopulateLanguageList()
Line 82: {
Line 83: DropDownListLanguage.Items[0].Text = (string)HttpContext.GetLocalResourceObject(
Line 84: "Default.aspx", SelectLanguage, Thread.CurrentThread.CurrentCulture);
Line 85: }
Stack Trace:
[InvalidOperationException: The resource class for this page was not found. Please check if the resource file exists and try again.]
System.Web.Compilation.LocalResXResourceProvider.CreateResourceManager() +4038050
System.Web.Compilation.BaseResXResourceProvider.EnsureResourceManager() +23
System.Web.Compilation.BaseResXResourceProvider.GetObject(String resourceKey, CultureInfo culture) +24
System.Web.Compilation.ResourceExpressionBuilder.GetResourceObject(IResourceProvider resourceProvider, String resourceKey, CultureInfo culture, Type objType, String propName) +32
System.Web.HttpContext.GetLocalResourceObject(String virtualPath, String resourceKey, CultureInfo culture) +56
APPortal.Login.PopulateLanguageList() in c:inetpubwwwrootAPPortalDefault.aspx.cs:83
APPortal.Login.Page_Load(Object sender, EventArgs e) in c:inetpubwwwrootAPPortalDefault.aspx.cs:20
System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +25
System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +42
System.Web.UI.Control.OnLoad(EventArgs e) +132
System.Web.UI.Control.LoadRecursive() +66
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2428
My site contain dynamic default page that consist of webparts.When i run my project on local server in my web browser msg gets display page isn't redircted properly.
View 7 Repliesi am trying to upload my applicaiton on IIS5.1 version.my application uses SQL server 2005 and Membership provider. everytime i create an virtual directory and run it ,it always says that login failed for user IUSR_TPN0150 .cannot open database emp.
how can i give access to annonymous users so that my login page is shown.
i have created an application in asp.net with C# this application is running well when i run it from visual studio but when i deployed it on IIS for testing it is not working it gives me error that isThe control with ID 'UpdatePanel1' requires a ScriptManager on the page. The ScriptManager must appear before any controls that need it.i have check complete project i did forget any thing and application is running wll but on iis it gave me above stated error any body can help me and one thing is that i install IIS after installing VS2008
View 1 RepliesI recently got abused on these forums because I was testing with the cassini in my development environment. So now I use local iis via the settting in the properties --> web tab and then creating a virtual directory.
The problem now is that the url is:
http://Localhost/Website
The problem is that http://Localhost/ is still the root - so its gone and broke all my css and JQuery ajax calls.
I've tried playing with application root setting in the properties tab with no luck. I have been querying the interwebs and realise that I need to do something in IIS -
I have an application which was running totally fine some days earlier. The problem began since the day i have taken SVN update from server. Its saying "error 404, file not exists", it just removes application name from url & only leaves "http://localhost/1980". Whatever changes i try in web.config it has no effect. It just stick to this error. I copied my previous web.config also but no luck.I tried to comment all lines which are redirecting user to any other page in case of error also. Its happening in my colleagues copy also.
FYI, all other .net applications on my system are still running smoothly. Only this application is not running. Checked the log & it says: 2010-05-15 05:50:12 192.168.1.2 3692 192.168.1.53 2869 HTTP/1.1 NOTIFY /notify 400 - Hostname -
i am develpping a alarm application when user minimized this it should be minimized appear near the system clock,local area connection icon(as hidden icon).
View 3 RepliesI have to host an asp.net that user can access that website something like http://111.11.11.11/myapp/homepage.aspx. ( my ip address will be 111.11.11.11). All I have local IIS installed. I want that if any user clicks on the link. He should be able to access that web application.
View 9 RepliesI have a website that appears to be "losing" the code behind bin/dll file support while the application is running. I have added an OnError event to the application and am logging it to the event viewer. At first I was getting problems with HTML and other bad input into text boxes. I have used validation and other methods to correct all of this. Now my issue is that the ASPX pages are still served, however I have custom code in the "onLoad" event and it is not being executed. This is in the "onLoad" for the master page so it is affecting the entire site. So far my fix has been to restart the website within IIS. This corrects the problem for anywhere to 24-48 hours and then it occurs again. Last night when this happened I did not recieve any new information in the event viewer log.
View 3 RepliesWe are trying to compress JS and CSS files in our application which is Running IIS 7.5. Both JS and CSS files are getting compressed
But application is not able to load these compressed .JS and .CSS files it is still referring to old un compressed files.
Just for your info Compress JS and CSS Files are at C:inetpub empIIS Temporary Compressed FilesDefaultAppPool$^_gzip_C^.
Here are the setting which i have in AppHost.config file
<dynamicTypes>
<add mimeType="text/*" enabled="true" />
<add mimeType="message/*" enabled="true" />[code]..
I am reaching the stage where my first web application is nearing completion and I want to look at running the aspx web application. The web application is going to be run on an internal server, so that only users of the network can access the web page.I am not sure of how I get my project from my pc onto the server and go about making so that I can open it in my browser,
View 3 RepliesI have a web application that initializes a third-party com application to perform few calculations. The website is deployed on a windows 2008 server (standard edition).
The problem I have been facing is that when I am logged in to the server (Remote Desktop Connection only as the server is not local), the com application initializes fine. But when I log-off or just close the remote desktop connection, the application doesn't get initialized. I have searched for a solution and found this:
[URL]
I created the scheduled task as I didn't know how to create the windows service (the description at
http://support.microsoft.com/kb/251192 is too confusing), and got the application to run when windows starts before even the user logs-in. But in even in this case, the application doesn't work unless the user is logged in and when I log-in, a second instance is created (with exactly the same user (admin)) and the original instance is never used.
I cannot get the application to run without logging off or atleast having to close the remote desktop connection.Is there anything I am doing wrong?
I am planning to deploy and asp.net application to a UNC path and create a virtual directory that points to the UNC path. For example the location of the asp.net application would be:
View 3 RepliesDoes anyone know of any requirements to get the Ajax Control Toolkit (Calendar Extension in particular) working in this OS? I have it working on my local macjine (VS 2010 Development Server) but it doesn't work when published to my Virtual Server running Windows Server 2008 R2. No errors are reported, just nothing happens when I give focus to the Calendar textbox (no Calendar appears).Anyone know of any configutrations that need to be made in Windows Server 2008 R2?Is there a 32-bit/64-bit issue with the Toolkit?
View 8 RepliesI've created a site using Visual Web Developer 2008 Express Edition (ASP.NET 3.5) but the server hosting it runs ASP.NET 2.0. I'm getting some odd errors running the live site. Is there anything I need to be aware of? Do I need to make any changes to the web.config file (that was generated in VWD) or anything else?
View 2 RepliesI added a reference to a DLL in my ASP.Net app. That started causing a BadFileFormatException, so I switched my app to target x86. I'm now getting this error:
System.IO.FileNotFoundException: Could not load file or assembly 'TheDLLThatIReferenced.dll' or one of its dependencies. The specified module could not be found.
The DLL in question is present in both the bin directory, and in binx86Debug in my app's directory on the server. When I try to run my app out of Visual Studio, it runs just fine, but if I try to hit it via the internet, I get that error. What might be causing this error, and how can I correct it?