Configuration :: Application Code Behind Stops Running
Aug 5, 2010
I have a website that appears to be "losing" the code behind bin/dll file support while the application is running. I have added an OnError event to the application and am logging it to the event viewer. At first I was getting problems with HTML and other bad input into text boxes. I have used validation and other methods to correct all of this. Now my issue is that the ASPX pages are still served, however I have custom code in the "onLoad" event and it is not being executed. This is in the "onLoad" for the master page so it is affecting the entire site. So far my fix has been to restart the website within IIS. This corrects the problem for anywhere to 24-48 hours and then it occurs again. Last night when this happened I did not recieve any new information in the event viewer log.
View 3 Replies
Similar Messages:
Nov 15, 2010
My webserver stop working. It gives time out error. There is nothing in the event viewer.
If I access the web app on the web server using [URL], it works fine. Also the html pages have no problem. Just the asp.net web applications.
View 2 Replies
Aug 27, 2010
i am trying to upload my applicaiton on IIS5.1 version.my application uses SQL server 2005 and Membership provider. everytime i create an virtual directory and run it ,it always says that login failed for user IUSR_TPN0150 .cannot open database emp.
how can i give access to annonymous users so that my login page is shown.
View 6 Replies
Aug 27, 2010
i have created an application in asp.net with C# this application is running well when i run it from visual studio but when i deployed it on IIS for testing it is not working it gives me error that isThe control with ID 'UpdatePanel1' requires a ScriptManager on the page. The ScriptManager must appear before any controls that need it.i have check complete project i did forget any thing and application is running wll but on iis it gave me above stated error any body can help me and one thing is that i install IIS after installing VS2008
View 1 Replies
Jul 15, 2010
I have an application which was running totally fine some days earlier. The problem began since the day i have taken SVN update from server. Its saying "error 404, file not exists", it just removes application name from url & only leaves "http://localhost/1980". Whatever changes i try in web.config it has no effect. It just stick to this error. I copied my previous web.config also but no luck.I tried to comment all lines which are redirecting user to any other page in case of error also. Its happening in my colleagues copy also.
FYI, all other .net applications on my system are still running smoothly. Only this application is not running. Checked the log & it says: 2010-05-15 05:50:12 192.168.1.2 3692 192.168.1.53 2869 HTTP/1.1 NOTIFY /notify 400 - Hostname -
View 1 Replies
Jan 5, 2011
We are trying to compress JS and CSS files in our application which is Running IIS 7.5. Both JS and CSS files are getting compressed
But application is not able to load these compressed .JS and .CSS files it is still referring to old un compressed files.
Just for your info Compress JS and CSS Files are at C:inetpub empIIS Temporary Compressed FilesDefaultAppPool$^_gzip_C^.
Here are the setting which i have in AppHost.config file
<dynamicTypes>
<add mimeType="text/*" enabled="true" />
<add mimeType="message/*" enabled="true" />[code]..
View 1 Replies
Aug 2, 2010
I am reaching the stage where my first web application is nearing completion and I want to look at running the aspx web application. The web application is going to be run on an internal server, so that only users of the network can access the web page.I am not sure of how I get my project from my pc onto the server and go about making so that I can open it in my browser,
View 3 Replies
Jun 11, 2010
while running my aspx pages on local iis 5.1 of my system, it doesnot shows the images and also when i tried to login with the same credentials that i was using with visual studio2005 it always give me error of wrong credentials
View 1 Replies
Aug 17, 2010
i got the below error while running an application on IIS server. Error 167 It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. E:iaeciaecWeb.config 48 .
View 4 Replies
Mar 22, 2010
I understand that asp:link button is a control with JS that forces a postback. I have code that runs on OnClick in codebehind of this linkbutton. I placed a counter (with the aid of viewstate) within this code to count the number of times the event fires. The first time it fires the code runs, but as the process is a little long, when the second postback fires it stops the first running in its tracks, so the execution is incomplete. I have googled this issue, and found that some say an img tag with out a complete src address forces a postback, I examined my source and I have no bad src's. The link button is on a complicated ascx page with many controls etc, so I cant post it here. Is there a way to CANCEL the link button immediately OnClick so it only runs once?
View 2 Replies
May 27, 2010
I have a on each row in GridView javascript countdown (e.g. remains 1D 45m 15s) in one column and action button in second column. When the user click on the action button, the modalpopup is displayed, but in this moment the javascript countdown is stopped .( The countdown is started in window onload event.
View 3 Replies
Aug 3, 2010
I have a web application that initializes a third-party com application to perform few calculations. The website is deployed on a windows 2008 server (standard edition).
The problem I have been facing is that when I am logged in to the server (Remote Desktop Connection only as the server is not local), the com application initializes fine. But when I log-off or just close the remote desktop connection, the application doesn't get initialized. I have searched for a solution and found this:
[URL]
I created the scheduled task as I didn't know how to create the windows service (the description at
http://support.microsoft.com/kb/251192 is too confusing), and got the application to run when windows starts before even the user logs-in. But in even in this case, the application doesn't work unless the user is logged in and when I log-in, a second instance is created (with exactly the same user (admin)) and the original instance is never used.
I cannot get the application to run without logging off or atleast having to close the remote desktop connection.Is there anything I am doing wrong?
View 1 Replies
Apr 2, 2011
I m facing one problem which is related to Bitmap Image Actually My image is saved properly without iis server but when i run application on iis server then its give Exception "A generic error occurred in GDI+."
I m using this code-
Byte[] bytes = (Byte[])ds.Tables[0].Rows[r][1];
MemoryStream memStream = new MemoryStream();
memStream.Write(bytes, 0, bytes.Length);
System.Drawing.Bitmap origBMP = new System.Drawing.Bitmap(memStream);
System.Drawing.Bitmap newBMP = new System.Drawing.Bitmap(origBMP, 100, 150);
System.Drawing.Graphics objGra = System.Drawing.Graphics.FromImage(newBMP);
objGra.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
objGra.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.HighQualityBicubic;
origBMP.Dispose();
newBMP.Save(Server.MapPath("ImageUpload\" + r + ".Jpeg"), System.Drawing.Imaging.ImageFormat.Jpeg); //exception throw "A generic error occurred in GDI+."
newBMP.Dispose();
objGra.Dispose();
View 3 Replies
Jan 12, 2011
below written question :
1.) What is the name of the OS process in which App Domain resides.
2.)if suppose There are Three Windows application hosted on a same envoirment and two instance is working for each application at a Time, means now total instance are six .what will happen among the below written cases :
a.) There will be six different app domain in a single OS process
b.) There will three app domain(one for each application) in a single OS process and some Parallel thread will be executed in each app domain for another instance.
c.) There will be Three OS process corresponding to each application.
3.) If eveything will remain same except there are three web application in place of windows in point 2, will there be any change in functioning.
View 1 Replies
May 18, 2010
I host a website that has recently been upgraded from .NET Framework 2.0 to .NET Framework 4.0. Within the website, I have an instance of BlogEngine which still requires .NET Framework 2.0. Each website is in it's own application pool. My issue is that when I browse to the blog portion of my website, I receive a 500.19 error with the following information...
The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration The web.conf file that is listed in the error message is the config file that belongs to my root website which is running .NET Framework 4.0. How do I get the two websites to run together in the same website using different versions of the .NET Framework?
View 2 Replies
Jan 27, 2010
I developed and deployed a web application using ASP.NET,C# successfully. The application was running perfectly until few days back. [NOTE: It still works fine on local machine (tested using both development server and IIS)] What happens now is: The website opens perfectly. After few operations which involves database interactions, in all the pages, the pages stop responding. I mean, after a few clicks, if I try another operation the page starts postback for unlimited time period and never gets rendered
and a following message is given: The connection was reset: Firefox 3.5... IE cannot display the web page: IE 7, 8 There is no database connectivity issues. I checked event logs on the web server and found few unhandlled exceptions, I corrected those. Now the event log doesn't show any error. But the problem is same.
I tried accessing the page from web server's browser, everything works fine. Even my boss can browse all pages with no problem (both have Win Server installed). Other machines (mostly XP) can't browse after sometime(as described above). I checked the memory usage, cpu time - NO ISSUES.
View 18 Replies
Jan 12, 2011
How can I make my application installed in my PC to start(ie., to popup for username and password) when I logged in to my PC, so that I can provide my username and password to the application and log in to it,similarly like gtalk that popsup for username and password once logged in to PC?
View 4 Replies
Jan 10, 2011
I am using asp:ScriptManager and asp:UpdatePanel to populate a DropDown , and for every field need to display hits in div.In order to Implement the hint I am using JS, it works fine unless I started to populate a dropdown based on another one.
here is some code lines from page and JS
<asp:ScriptManager ID="sm" runat="server" EnablePageMethods="true"></asp:ScriptManager>
<asp:UpdatePanel runat="server" ID="up0">
<ContentTemplate>
<dd><asp:DropDownList runat="server" ID="CCategory" CssClass="lst" ValidationGroup="Property" AutoPostBack="true" onselectedindexchanged="CCategory_SelectedIndexChanged" /><span class="hint">Please choose a city where you want to or having a property.<span
class="hint-pointer"> </span></span></dd>........
View 2 Replies
Jan 23, 2011
I'm using some JS to show some divs.The divs' content is set up in a MultiView control in the server. Depending on certain parameters, I trigger some postbacks to make the server select the appropriate view. The problem is that everything works if I keep the alert(1); below, but stops working if I remove it.
Here is the code. I have a button which its OnClick() calls ShowEditor(), with an element and a type. ShowEditor() makes the editor's div visible after raising a postback to let the server select the correct view in the MultiView based on the type. This works fine. The editor loads and there is a div inside (vwText_Text1) which I'd like to assign an OnClick event to. This only works if the alert() is present.
[code].....
View 5 Replies
Jan 6, 2011
Ever since we have moved to the 4.0 framework one of my apps now reports errors when users enter punctuation into the form. Which is a good thing, I do have a function in place that replaces all apostrophes with a double apostrophe but decided to beef it up by applying the httpUtility.htmlencode to the textboxes before I send it to a confirmation page that then emails the page to me and the person submitting the form. The problem is that the checks I have put into place to sanitize the textboxes don't fire because the 4.0 framework stops the submission dead in its tracks before the code can be ran. I have set the ValidateRequest="false" in the page tag but still no luck in getting sanitization to run. Is there something I am missing? From all I have read it should have worked.
View 1 Replies
Oct 21, 2010
Some time ago I converted an old windows application to a web application. This web application works fine as a stand alone app. I was recently informed that my client had a new standard layout and they are using a master page. They sent me the master page.
The web application is quite basic in that it makes a number of calls to a web service to retreive a list of customer, retrieve list of products and allows customer to create an order containing products.
I did the following to get make use of master page:
Copied it to my solution Update the page directive to include the MasterPageFile attribute and set it to point to master pageAdded the relevant content areas to my page Copied my code (control declarations etc) into the relevant content areas.The application compiles correctly and renders as expected. However, it does not behave as expected.
For example, I display a list of customers in a GridView. The user can select a customer by clicking the select button that is present for each row in GridView. I do this once and select a customer the page is posted back and relevant row is selected. I select a different customer and the page it posted back but this time the selected row does not change. It is still shown as the first row i selected.
This functionality works as expected if i remove the master page attribute and content areas.
View 4 Replies
Jul 27, 2010
I have a formview that I open to the edit template, some textboxes are not available and some are populated by dropdown lists, and the update function works fine.
As soon as I add some logic to the code behind page for the update control, the UPDATE link on the formview stops updating my DB.
View 10 Replies
Aug 11, 2010
I am having serious issue running a MVC web site from IIS 6 especially with Windows authentication mode. I know its very simple but missing some ting between. Succeeded configuring MVC on IIS 6. Now Trying to enable Windows Authentication mode on MVC Web Site, Steps included in my configuration
- enabled windows authentication mode in web.config
- Enabled Integrated Windows Authentication on IIS web site under Directory Security.
- Given permissions to a Domain group (eg: asiaDomainGrp) [Read, Write] Do i need to add ASP.NET Machine accountIUSR_<machines name> under this?
During the intial loading, I am trying to query Active Directory to get authenticated user's full name to display on default page, this is not success full due to some issue, later I changed to "HttpContext.User.Identity.Name". Now I could able to access Default page from the web server, but real heck is here. For some reason IIS is using NT AUTHORITYANONYMOUS LOGON.
[Code]....
I have separated two servers as Web server/Database server.
View 4 Replies
Aug 2, 2010
I have an ASCX component that has a lot of javascript declared in a script tag in the ascx itself. I can set breakpoints, and the debugger stops as it should, but the text that is highlighted in the debugger as the "current line" is nowhere near the actual javascript (it is much higher in the rendered file than it should be). I can "wing it" for one or two lines with the real code side-by-side with the "false" line of execution, but I lose all the hover abilities and everything else that makes javascript debugging useful.
I have tried putting the script at the top of my ascx file, but to no avail. I've tried not setting a breakpoint until the entire page is rendered, so that I have to scroll all the way to where the actual lines of code are, and the debugger still stops somewhere way above it.
View 1 Replies
Nov 24, 2010
i have a popup that is getting displayed when Save button is clicked. The popup has 2 buttons. Yes and No. No should cancel the popupand yes should take you to function in the code-behind say, btnSave_Click(object sender, Eventargs e). How is it possible.
Below is the code where i am showin the popup.
[code]....
View 4 Replies
