i ve deployed a site, i want to give access only to particular IPs (192.168.0.12 to 192.168.0.80). If a request is coming from particular IPs then site should open otherwise a authentication message shown to other users. How can we achieve this?
View 3 Repliesthe account we use to copy/publish websites to our web server is not allowing us access to push websites. I've added this account to the permissions in the links listed in the below link, but i don't have success when trying to push remotely. When the account is in the local admins account, everything works flawlessly, but we are not allowed to have it in there. http://social.msdn.microsoft.com/Forums/en-US/vssetup/thread/31be047e-4716-4974-b8a1-be0111b50199 I've googled and searched a lot for this particular error, but am not finding an answer that helps. We get this error, 'Unable to create the Web 'http://edea01/test/planning'. You are not authorized to perform the current operation', and the above link is the scenario that matches mine the most. I don't do develompment work, but am asked to figure out this connection problem.
View 3 Repliesi am new in asp.net i dont know to how to combine two asp.net web site into one like domain and subdomain concept. i know the procedure to host one web application in local iis. how to combine two application and how to host in local iis i.e) single url as domain(one web application) and subdomain(another web application).
The url should be like these:
http://localhost/firstapplication/
http://localhost/secondapplication.firstapplication/
How can use the same web.config for different websites?
View 2 RepliesAfter i Installed the VS 2010. I ran into problems running the asp.net 2.0 websites.
I visited the fixes page to read about the IIS metabase. the problem is - aspnet_regiis of framework .net 2.0 doen't work any more. Also all the websites / virtual directories configured in IIS 5.x on Windows XP to use the asp.net 2.0 framework don't work.
So i downloaded the Metaacl.vbs to check the settings of IIS metabase on my PC.
The permissions assigned to Admin user and the Service user account seems to be alright. No i am confused as to what is the exact cause of -
1) The websites targeting Framework 2.0 are not working any more
2) Why is the aspnet_regiis corrupt and gives the error - "The application failed to initialize properly" Is it a known compatibility issue for VS 2008 and VS 2010. Can we or Can we not have both of them installed parallely?
I have 3 web.configs and 1 web project. I compile it once, and when deploy it, all I do is copy the correct web.config to the correct directory.
This is too complicate to maintain, when I have web.config change I must change all the three.
So, what I want is to keep only one web.config file, for all three websites.
In order of doing so, I have created a new settings.xml file, and I wish to read everything from there instead of te web.config file.
to my questions:
1. I need to remove ConnectionString from web.config to the settings.xml file. How do I change the providers connection string programatically?
[Code]....
Seems like moving the connection string to a different file might be a difficult task:)
2. How programatically can I do what I did on the web.config easily:
[Code]....
I just upgraded to windows 4G hosting from old windows hosting on Godaddy. I have hosted multiple websites on this hosting account. The primary domain website [URL] is working fine after the upgrade but all other sites hosted in same account report some errors.
The structure is like this:
Root: inHouseRecipes.com
Root/s/Website1
Root/s/Website2
I have checked that the websites in subfolders are set up as an application in IIS 7. Also, the web.config of parent (root) website has the following
<location
path="."
inheritInChildApplications="false"
>
tag to stop other child web.config to inherit anything from parent.
I use asp.net to code my websites. Before 4G upgrade everything used to work like a charm.
Has anybody else also experiences the same issues? If yes, what are the changes that we need to make to support multiple web sites in same 4G hosting account?
Need to execute .aspx page & .vb code from PHP server.
Therefore i have downloaded MONO for windows from link: [URL] .... And installed as per the guidelines provided on website: [URL] .... Now, how should i use it on PHP Server .....?
I would like to have several websites that use the same styles, scripts, and App_GlobalResources. What would be the best way to structure my websites (web applications) to use the same files? I also need to share user controls with code behind.
View 6 RepliesI have numerous web sites created over the years. Some were created using FrontPage with aspx pages added that were created in VS 2003 or VS 2005. Others were web sites that were actually created with VS 2005 or 2008. All these older sites reside in the C:Inetpubwwwroot folder of my present development computer, with only the .sln and the .suo files residing in the project folder. All of the sites have counterparts on the Internet.I am about to build a new computer and would prefer to only install VS 2010 on it. When Previously building new computers, I installed VS 2005 and VS 2008 so that I could administer
View 2 RepliesI have a few websites that should access a central location (folder) on a different domain that stores pics. In previous version of this system I stored each pics folder under the same domain and I could access the files with FileInfo
Dim fi As FileInfo = New FileInfo(MapPath(img.ImageUrl))
How can I ger the file info for a file in a different domain ?
Why is there no default 'create/open' access to 'WebSites' from the VS2010 start page?
Background:I've succesfully been developing ASP.NET web applications (via WebSite method ((((Not WebProjects)))), using VisualWebDeveloper) for roughly 3 years. Personally, I prefer the WebSite method or strategy due to the decrease in both size and complexity (the web applications I build are generally for around 50-100 simultaneous users logging in and out and constantly manipulating data). I will continue bulding my sites via the 'Website' method provided VS2010 doesn't begin it's deprecation.The root of this question (which boiled into this post) came from perusing this article and this video tutorial. It's a shame to see functionality that brings with it an overall ease of use and increase in production capacity by decreasing both size and complexity of web application development... downplayed.
If the Visual Studio 2010 Development Team left this functionality out for a reason, I would very much like to know. So that I know what is going to be "sponsored by Microsoft" in a couple of years and I don't waste another second considering using the 'WebSite method' as a viable solution (as I know that I can't stick with vs2008 while rest the development community gets to evolve with the innovations implemented within vs2010)... WebSite method or the WebProjects method.
I have an ms access db file and now i want to use it in my app. i have given like
Provider=MSDASQL.1;Password=pwd123;Persist Security Info=True;User ID=swgp;Data Source=SWGP;Initial Catalog=C:swgp BJswgp
but it is giving error to me.If anybody know how to give this connection string for password enabled ms access database,
We have created a new cname for our subdomain website. The new website is working properly with cname. We do have .net application inside the webiste which is not working with cname. For eg,1. http://servername/_folder1/app/mypage.aspx (Accessing .net application (App) website without cname)2. http://NewDomian.xxxx/app/mypage.aspx (Accessing .net application (App) website with cname)The first case is working perfectly, but when I access the second url, I got the following error.Description:
An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.Source Error:
[Code]....
How can i get ConnectionString In web.Config when you are in DAL(data access layer)Some said it should me in <appSetting> but i think this is not appropriate to do because web.config have dedicate tag for connection strings.i am creating a 3 tier each layers is a project in 1 solution
Project ://solution
|_View :WebApp // Dependence (BLL,ENTITY )
|_BLL : ClassLib // Dependence (DAL,ENTITY )
|_DAL : ClassLib // Dependence (ENTITY )
|_ENTITY : ClassLib //note this is not a layes just a central data object reference
I have created a website (VB) on my local host. A couple of pages on this website use gridviews or detailsviews with an AccessDataSource connection to a MS Access database. This works perfectly. But now I want to move this website to a hosting provider. And on this hosting provider my website works well but not the pages with a connection to the Access database. I searched the whole internet for a solution but I didn't found it.
Folder structure on the host:
- db > Access databases (name: testdemo.mdb)
- logs
-wwwroot > website (for example, the gridview is placed on index.aspx).
I think AccessDataSource didn't work, but what kind of code may I use in the index.aspx and web.config? My hosting provider said only, use a direct link to the database and not a relative, for example: E:xxx.comdb estdemo.mdb
I have an AJAX web application.ASP pages are accessing various Web Services that are part of the application using standard Microsoft .NET AJAX extension APIs.Now, I have to call some of the web services from the Windows app.It works when I add web reference to a project on my local development machine.
View 1 RepliesI'm trying to do updates into for a table with checkbox and number value type from the search page but there is problem with my update statement.Problem with the code: Unable to perform an update, datatype mismatch.
<div class="row">
<span class="label">Date: </span>
<asp:TextBox ID="txtDate" runat="server" />
</div>
[code]...
have deployed an mvc 2 app to a local iis server. It works fine when i go to http://localhost/MyApp. However when i insert my ip address in the place of localhost and try to go to it i get an 'oops google chrome can't connect'. I have all firewalls disabled. I can view the default web site at http://82.168.191.228, just not my mvc app at http://82.168.191.228/MyApp.
View 6 RepliesI have created a database and a website using C# and ASP.NET. I am deploying the website from IIS7.0 and created the connection string from the connectionstring tool in the IIS Features View.But I get any data ( access my database) when i run the website from the IIS, it works well when i debug from the Visual Studio.
View 8 Repliesassume that i have publish my project on localhost and i want to access it from remote computer,
assume that my project name is "project1" , and my IP address is @192.132.999
what the URL should be in order to access it??
it should be http://192.132.999/project1
The company whose program we are using developed an API that can be accessed from a web application as well. They provided us with a sample of an ASP.NET application which works fine. When I open the *. Sln file, and then the Default.aspx page (http://localhost:65250/Default.aspx) I don't have a problem using this DLL.
But, when I copy the codes on the server and I try to access the application via web directly, like http://servername/default.aspx, it is telling me that the assembly from this DLL is not registered.
I noticed that when I open this application through *. Sln file, I don't see the BIN folder, but a REFERENCE folder instead.
My question is: how can I register this DLL so I can use it via web directly?
I dont' know if its IT that is having the issue, but we have both SQL2005 and SQL2008 on the machine, because we have data being pulled from both. Eventually 2005 is going away, but ATM it needs to stay until the conversion. But for some reason it won't connect to the 2008 instance. We are using DNS entry for security and easy use on connecting to the site from the external test web box.
<connectionStrings>
<add name="EntryConnectionString" connectionString="Data Source=WEBTestSQL01.xxxxx.comSQL2008;Initial Catalog=EntryDB;Integrated Security=SSPI;" providerName="System.Data.SqlClient" />
[code]...
I create a project in ASP.NET and my sql database and query procedure are stored at other system. i remotly access this file and i want to do access this database on my project
can it access from webconfig connectionString?
Im trying to access a website on another server through SVN but i am not finding the svn checkout alternative in my folder - i'm not finding anything with SVN even tho ive installed and reinstalled it once. Do I have to set some setting somewhere?
View 1 Replies