Controls :: Automatically Add Rows To PDF Table Using ITextSharp And C#
Jan 27, 2014I would like to know if is possible to create a table with itextsharp that if the is necessary auto-create a new row in the pdf ...
View 1 RepliesI would like to know if is possible to create a table with itextsharp that if the is necessary auto-create a new row in the pdf ...
View 1 RepliesI'm sure this has been answered many times already, but I still can't seem to find exactly how to search for this issue, so apologies in advance.
Anyway, I have a VB script for entering a row of data into a table by a web user. When this row of data is entered, I wish to take some of the values from the columns of the "primary" table, and have that data automatically create a new row of data in a "secondary" table. I think I'm part of the way there, here is my script:
[code]...
"ProductsByMfr" is the "primary" table - the table that the user adds data into when the button click event is fired.
"DealerPricing" is a "secondary" table that I wish to have some of the data from the newly-entered row in ProductsByMfr copied into. Am I even close here?
protected void btnGeneratePDF_Click(object sender, EventArgs e) {
try {
string sess = Session["LogId"].ToString();
sqlCon = new SqlConnection(conString);
sqlCom = new SqlCommand("usp_Invoice_Master", sqlCon);
sqlCom.CommandType = CommandType.StoredProcedure;
[CODE]....
What I am doing is to generate a pdf booklet from database. I need go generate a content table with page numbers. E.g there are two chapters with page number like:
Content table
Chapter 1 ----- 3
Chapter 2 ----- 17
The text "Chapter 1 ----- " is normal paragraph. But the page number "3" has to be produced using PdfTemplate because it can only be known later. But the pdfTemplate is absolutely positioned. How can I know where to position the PdfTemplate? Am I right on this ? How could I figure this out or should I use other methods?
I am getting a NullReferenceException when the following code is executed. I have also noticed that the nested table appeared on a new page when I added in the code that wrote cells to the main table. It doesn't occur if I take out the two loops that write cells to the main table.
<%@ Page Title="" Language="C#" MasterPageFile="~/Main.master" %>
<%@ Import Namespace="iTextSharp.text" %>
<%@ Import Namespace="iTextSharp.text.pdf" %>
<%@ Import Namespace="System.IO" %>
<script runat="server">
protected void Page_Load(object sender, EventArgs e)
{
Document doc = new Document(PageSize.LETTER);
// Here is some stuff needed to put the pdf into the users response stream
[Code]....
I am exporting some data to a PDF and I have been using iTextSharp with a lot of success, but I just hit a wall.
I have a group of information I need to keep on a single page. This information includes a handful of other Paragraph objects and tables. I can add 3 Paragraphs to another parent Paragraph and set that parent's KeepTogether property to true and everything works great.
When I add a PdfPTable to the Paragraph with KeepTogether set to true, the table disappears. No Exceptions or error messages, the table just disappears.
Any clue as to what is happening? Is there a work around? Should I be coding differently, like is there a better parent control than Paragraph to keep text and tables together on one page?
I want to count the number of rows in Gridview ,thru JS. When SelectAll is executed,alert message 'a' is displayed,then page posts back to the server.1) It do not display the alert message gridLength 2)WHy the page is postbacked,I write return false???
Code:
function SelectAll()
{
alert('a');
var gvET='<%=GrdCostPetroleum.ClientID%>';
var gridLength = gvET.rows.length;
alert (gridLength );
return false ;
}
I am running .net 4.0 asp.net app on IIS 7. I want to know if there is an easy way of adding rows to an excel 2007/2010 (not too fussed) template file that a user can download from the server.
For example, the user might check a couple of tick boxes and clicks a button on the web page. The server does a sql query on a table and comes back with the results. I have an excel file with some headings, column titles, formatting etc. on the web app's resources directory. I want to make a copy of this file, insert each of the results as a row into this file (insert first name into cell A3, last name into cell B3 etc.). And make it available for the user to save on their disk.
Since Excel (xls) format is an "Open format", I was wondering how easy/straight forward this would be. Is it a matter of loading the excel XML DOM and inserting XML elements? What are libraries I need to use?
I need to select the rows between 20 to 30 from a table without using where condition. How is it possible?
View 2 RepliesI want to delete all rows from my table and then Sequence no of the primary key will start at 1.
View 1 RepliesI would like to be able to read the first row of a table and then each successive row sequentially individually. So, is there a way to read the first row of a table, whatever the primary key may be, and then read the next sequential row in the table until the last row has been read? I need to be able to do this in order to create a list of column entries in each row for a listbox control that a user can select from.
View 3 Repliesi have a table that has some columns and rows i want this table to have borders that are visible inside it i want every column an row to be closed in borders how can i do that?
View 1 RepliesI have an asp:Table and around the mid point of the table there is a DDL with values 2-5. What I want to do is add the selected amount of rows using AJAX right after the table row that has the DDL in it. I know how to dynamicly crate the rows, the info in the rows, and how to use AJAX to make things. Problem is I can not put the ContentTemplate tag inbetween the asp:TableRow which would mark the location I want the dynamic rows to start being added. I did some searching on here but most posts I find start with making the table from code and not the asp:Table tag
View 2 RepliesI have one table named 'dbo.ac_Products' Within this table there is a column named 'ProductId' There is also another table named 'dbo.ac_CatalogNodes' Within this table there is a column named 'CatalogNodeId' and a column named 'CatalogNodeType'
I need to delete all the rows from 'dbo.ac_Products' and 'dbo.ac_CatalogNodes' where 'ProductId' = 'CatalogNodeId' and 'CatalogNodeType' = 1
how do create 10 cloumns and 10 rows in the table. The rows will came a1,a2....a10.
View 4 RepliesI am trying to generate a dynamic table andd add rows to a ASP.Net table control on my UI. My problem is as I add a new row from MyTable, in to another table the table I am copying from, will loose one row. Here is the code:
Table
myTable = new
Table
();
[Code]....
am just reading one row in every loop and add that row in to another table object, why is 'myTable' loosing loosing one row in each loop?
I am trying to delete or add rows in a table but since the table is in an update panel,upon deletion the row goes away and then comes back.I have tried using return false but it does not seem to work in IE or FF.
I am using the following code:
$(document).ready(function () {
$(.table).click (function ()}
(this).parent().remove();
[code]...
Basically I need a way to disable the postback.
I need to let my user add rows dynamically to a table, and after doing some research, it seems the best way to do this is through a GridView bound to a DataTable. However, I'm really struggling adding dropdownlists to the datatable, and this showing them in the gridview.
Here's the design I want:
ddl1 | ddl2 | ddl3 | ddl4 | ddl5 | ddl6 | ddl7 | textbox
When the user opens the form, he or she will be presented with one row. ddl2 etc will be populated when ddl1 is selected etc etc. When appropriate, the textbox will be enabled allowing the user to enter a comment (this is to report errors, and since users are, at best, not to trust to write the same thing twice, I need to use ddls.
Now comes the question - how do I add a ddl to the datatable? I've tried several ways, but I cannot get them added.
I'm trying to figure out how to update multiple rows in my Directory table, when a user changes their Street Number or Street Name in their profile. They can add multiple users to a directory and each user they add to the directory has this primary users UserId in it. So if the primary user changes their address, I want it to update the address for all the users they listed in the directory as well. I'm adding this to the On_Click in the Code Behind, so when they click to update their profile, it fires this function as well. This code may be way off, but here's what I have right now:
[Code]....
I have ASP.Net Repeater control.
The itemtemplate of repeater control is having a table row
<asp:repeater>
<header>.....</header>
<itemtemplate><tr><td>some text</td></tr>
...</asp:repeater>
And I am binding these repeater control with some datasource.
My requirement is to have focus on first item row and i should be able to use tab ket to navigate between various rows of the repeater control(which is ultimately a table)
There is no anchor(<a>) control inside the table.
I am using onclick event on table row which does something in my application.
I want my user to use TAB key to navigate between rows.
How do I remove duplicate rows from a data table based upon a two column values;I want to pass in a Data Table and a column names and get the data table back with data rows where that columns value are unique.
I have a Data Table with Duplicate Rows i want to delete the duplicates rows based upon two column values if both columns values are there then Delete the row.
I am having a table named Invoices.From that table I want everything the newly inserted and updated rows from that table.
View 3 RepliesI have an ID column (int) in my table which also needs to be a unique key.
last time I worked with a database (BD2), I set this as an autoIncrement feild and it would automaticaly 'deal with it' (ie, maintain the last used value somewhere and automaticaly used that value (after incrementing it) for any new row on the table).
How do I handle this in ASP.NET. Especially, as I try to add a new line based on form content when the user presses on a button (C#).
im tryin to do something without success. I have some SQL table with few columns (fileId(int), fileName, copies, color and finish), the page is build in a way, that the user upload few files (the files uploads to some folder, and the fileId and fileName are write to the above SQL table - so the other columns (copies, color, finish) are stay blank - which is OK!!!) after he finished uploading the files he can see the files names in GridView and in that grid view i put some textbox for copies, and 2 DDL for color and comments. I need to update the rows with the new data after the user click some button (the all rows) this is the code:
aspx
[Code]....
the aspx.cs
[Code]....
I am using asp.net3.5,sqlserver2008. I have retrieving data from Accounts,BUDGETS like this.
select a.AccountLink,a.Master_Sub_Account,b.* from Accounts a inner join BUDGETS b
on a.AccountLink=b.GLLink where a.AccountLink=1
output of my query...
AccountLink Master_Sub_Account GLLink AccType Budget01 Budget02 Budget03
[Code]....