Custom Validator For MaxLength Property Of Textarea
May 16, 2010
I have quite a few text area's on my page and am wanting to limit the number of characters for each one. However each one should be able to have its own maxlength (i.e. one could be 20 characters and the other could be 100 characters). My validation on the page is all done using custom validation as the built in validation of .NET is not extensible enough for me to display my validation errors how I want to display them. So this is what im wanting to do:
Make a custom validatorPass a MaxLength value from the custom validator into the javascript function, this value must also be accessible from the code behindI can then run client side and server side validation on each textbox control. The problem I am having is passing a MaxLength value to client side script and to server side. Is there a property on custom validators which I can use to pass values around? For instance in Javascript I would want the value of the MaxLength and also the id of the Div which will show the characters remaining, and server side I would need to know the MaxLength. I have done lots of research on this and cannot seem to find an answer.
View 8 Replies
Similar Messages:
Jun 22, 2010
I've searched a fair bit round and tried a number of potential solutions, suggested on their respective threads on various sites, to which none have worked for me.
My objective is to make sure the date entered, and to be stored, is not 'less than' (before) the present datei.e. Booking a reservation for a restaurant.
The first is:
"The ControlToValidate property of 'cvDate' cannot be blank..."
I've tried specifying it in page_load and .aspx source, the same has happened in both, in addition to ValueToCompare. I cant understand why it cant detect it?
C# (ControltoValidate):
Csharp Code:
[code]....
View 5 Replies
Nov 23, 2010
I am trying to set the width property of a custom control validator but it is not happening at all. The width of the validator control popup is constantly 100% width (the width="200px" below has NO effect at all)
here is my code:
[code].....
View 10 Replies
Jan 21, 2011
i want to apply my custom validator multiple times on a single property. i am using mvc 3 unobtrusive js for validations.i have tried this solution
http://www.paraesthesia.com/archive/2010/03/02/the-importance-of-typeid-in-asp.net-mvc-dataannotations-validation-attributes.aspx , but not working for me.I am getting error like this : "Validation type names in unobtrusive client validation rules must be unique."
View 7 Replies
Nov 30, 2010
I am trying to use MaxLength function for the textbox in code behind.
How is it possible for textbox txttabname here, which is created dynamically.
[Code]....
View 2 Replies
Dec 17, 2010
I created my custom validator in one project, something like that:
[Code]....
he composite control in another project. I added a reference of the custom validator project to the composite control project. I have a textbox in a composite control and I would like to validate this textbox by the composite control I created. But how can I do that? How can I create the custom validator instance that is linked to the custom validator I created?
View 1 Replies
Sep 3, 2010
<asp:TextBox ID="TextBox1" runat="server" />
<asp:CustomValidator ID="CustomValidator1" runat="server"
ClientValidationFunction="ValidationFunction1"
ControlToValidate="TextBox1"
Display="Dynamic" />
And a validationFunction:
function ValidationFunction1(sender, args)
{
}
And i would like to know if, inside the function I could get the Control to validate something like: var v = sender.ControlToValidate;
View 2 Replies
May 19, 2010
I'm looking to validate the length of a textarea using a regular expression validator. It should allow all characters and crlfs. I'm also concerned about crlfs counting as 1 or 2 characters, I'm concerned it may be different across browsers but I'm hoping ASP.NET regulates it. Also, I'm saving to a mix of varchar and nvarchar fields in MSSQL, do I need to be concerned about the way crlfs are saved there? I'm in a hurry to do this right, so I'll be researching all this on my own but I'm just hoping someone out there might have experience handling such concerns.
View 1 Replies
Mar 19, 2010
How to assign MaxLength Property to BoundField column in DetailsView COntrol without Converting into TemplateField.
View 3 Replies
Mar 21, 2011
how can I use a Required Validation in a property Prop2 only if the Prop1 is true?
public bool Prop1 { get; set; }
[Required] // I need this validation only if the Prop1 is true.
public string Prop2 { get; set; }
View 2 Replies
Jul 6, 2010
I have a validator callout extender that works, it shows the callout box. But, it does a postback. It didn't do a post back the first time I clicked the button but it did for subsequent times. I read on the AJAX site that a custom validator must be used with this for it to work. I'm currently using this with a required field and regular expression validator. It works, the callout appears, but it doesn't work every time with out the post back.I posted this to see if there is a way to get this to work with a required field and regular expression validator, with out using a custom validator. I'm using the newest release of the toolkit, so I thought the documentation may be old, since the callout is appearing.
View 8 Replies
Jan 13, 2010
I've been trying to get a custom validator component working that ensures at least one checkbox from a checkboxlist has been checked. I've been used some code I found on dotnetjunkies.com but the client-side validation didn't work. I've been attempting to modify it to get the client-side javascript validation to work with no luck. Basically, I compile the below code into a DLL and add it to my bin folder.
[Code]....
View 2 Replies
Jul 15, 2010
I'm working with an MVC1.0 web app and I've found a bit of an odd anomaly.
I have a search box on the first page (normal text box) and the input from this is passed through to the ViewData and on to the second page.
On the second page, I render a TextArea with this search input text from the ViewData.
Eg:
[Code]....
The problem is, there is an extra line break in the TextArea, just above the original text.
Stranger still is that if I now submit this page and the view is reloaded (after validation fails) - the original string of text has been trimmed and has no line breaks, but the TextArea now has 2 line breaks above the original text.
This can be repeated - every time the page reloads it has another line break.
It's driving me insane - does anyone have an idea on how to fix this?
FYI, you can check it out yourself - on your mobile phone, browse to [URL], punch something in the search box and hit search. You'll notice one line break added the first time the page loads. Then just hit "Find Best Offer" without entering a budget or selecting a category, and you'll see what I mean about the additional line breaks.
View 1 Replies
Sep 15, 2010
So what I'm trying to accomplish is this
[Code]....
The user control has public properties named accordingly and the page has protected properties accordingly which I've verified have the desired values.
For some reason the values are always empty strings or 0s in the usercontrol, no matter what the page property is.
View 1 Replies
Feb 18, 2010
How insert a drop list property into a custom webcontrol? This a drop list property is show all textbox control on usercontrol or webpage.
View 3 Replies
Sep 3, 2010
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
View 2 Replies
Oct 15, 2010
Iam developing a custom checkbox control deriving from the 'compositecontrol' which i need to use it for a composite control purpose.
public
class
TngCheckBox :
CompositeControl
{
i have written the required properties which are working fine except the "checked" property. here is my code for 'checked' property. i tried both the below ways (commented one and not commneted) . the problem is the 'checked' value is not setting the value at the get set part of the property.its assigning the value at the design time , but when i check and uncheck its not updating the property value.which is resulting me wrong .
[Code]....
View 4 Replies
Mar 15, 2010
I have a custom control, inherited from Button. This is the class definition for the control and 2 properties:
[Code]....
I show you 2 properties, only to illustrate the problem.
as you see Aplicacion property is of a custom type Sistema, and Roles property is of type List<UserRol>.
The Aplicacion property is rendered well, this way:
[Code]....
The problem I have is with List<UserRol>. I couldn't get it to be rendered. I expeect to be rendered this way:
[Code]....
Finally, this is the TypeConverter and Editor definitions for the list:
[Code]....
The UserRol class is a typical class, without any special attributes.
I have discovered that when I use the custom editor for Roles property, the collection is not persisted. When I use the default editor for the collection, the collection is persisted.
View 1 Replies
Nov 26, 2010
I need to create one custom text box control which should be bind with data base.
I am referring following link...
http://msdn.microsoft.com/en-us/library/system.web.ui.webcontrols.databoundcontrol.aspx
I used DataBoundControl to create my control but i am not able to do it properly.
public class SimpleTextBoxControl : DataBoundControl
{
private TextBox nameTextBox;
public string DataTextField
{
get
{
object o = ViewState["DataTextField"];
return ((o == null) ? string.Empty : (string)o);
}
set
{
ViewState["DataTextField"] = value;
}
}
[
Bindable(true),
Category("Data"),
DefaultValue(""),
Description("The text to display on the link."),
Localizable(true),
PersistenceMode(PersistenceMode.InnerDefaultProperty)
]
public virtual string DataTexValue
{
get
{
string s = (string)ViewState["Text"];
return (s == null) ? String.Empty : s;
}
set
{
ViewState["Text"] = value;
}
}
protected override void PerformDataBinding(IEnumerable retrievedData)
{
if (retrievedData == null)
return;
base.PerformDataBinding(retrievedData);
Controls.Clear();
nameTextBox = new TextBox { ID = "nameTextBox" };
foreach (object dataItem in retrievedData)
{
if (DataTextField.Length > 0)
{
nameTextBox.Text = DataBinder.GetPropertyValue(dataItem, DataTextField, null);
}
DataTexValue = nameTextBox.Text;
}
this.Controls.Add(nameTextBox);
}
}
View 1 Replies
May 15, 2010
I know that how to create custom control and add custom property.
I want to create property like DataSource to my custom control.
View 1 Replies
Jan 11, 2011
I have created an asp.net custom control and now want to pass some values to it from the page which will use the control.Is there any way i can add my own property to the control (like Text property is present for a Label control)?
View 4 Replies
Feb 11, 2010
Does anybody know of a way to set the width of a custom validtor so that the error message text will wrap if it exceeds the specified width? I have a user control that contains a custom validator which the containing page can set the error message on based on specific validation results. he user control sits within a table cell in a page. If the message is very long it simply prints the entire message on a single line ignoring any column widths that are set. I have tried setting the width property on the custom validator itself to no avail.
View 2 Replies
Apr 29, 2010
I am trying to understand a little more about implementing a custom model validator. I have implemented a custom model validator (derived from DataAnnotationsModelValidator<T>) for my custom validation attribute in order to do validation on the client side as well. There is not much documented about DataAnnotationsModelValidator. Besides, implementing client-side validation when is it a good idea or needed to implement a custom model validator for a custom attribute?
A separate question - in trying to understand how and when a custom model validator is used by the framework I noticed that my custom validator is always created with the context (2nd parameter in DataAnnotationsModelValidator<T>'s constructor) being a ViewContext, although it is declared as ControllerContext. Will a validator ever be created with something else than a ViewContext, and if so, when?
View 2 Replies
Feb 10, 2010
I have two buttons on my page, the first page is View Button and the second is Update Button. View button display's member's personal profile. If I click on the view button, my custom validator automatically trigger, meaning, it automatically displays the error message. Whereas, the custom validator must trigger if I click on the Update button. How am be able to deal with this kind of problem.
View 6 Replies
Jan 20, 2011
here is the code "when i select a value from calender customvalidator is not called . . "
[Code]....
View 7 Replies