Custom Error Page For 404 Returns 302 For Http Status
Nov 29, 2010
In my asp.net web site I have custom error pages defined as following in my web.config file.
<customErrors mode="On" defaultRedirect="~/defaulterror.htm" >
<error statusCode="404" redirect="~/404.htm" />
When file is not found it correctly display 404.htm page but the issue is when I do Fiddler trace it returns 302 as HTTP status code.This is a big issue for search engine page indexing due to this lot of broken links still have been indexed recently because of this in my web site. how can I prevent returning 302 as HTTP status code for file not found errors and return 404 for file not found errors.I am using asp.net 3.5.
View 3 Replies
Similar Messages:
May 17, 2010
I have setup a custom 404 page custom404.aspx that returns a "404 Not Found" error correctly, however the non-existant page that was initially requested returns a "302 Found" status.So when I test thispagedoesnotexist.aspx, it returns a "302 Found" then the custom404.aspx loads and returns a "404 Not Found" status.I want to make sure that search spiders/bots understand that the requested page does not exist and should not show up in any search results.
View 4 Replies
Jan 7, 2010
I wrote a web services with Windows authentication, when i consume this WS from my app inside my network all work great, but when I consume this WS outside my network the WS return "The request failed with HTTP status 401: Unauthorized"I'd try the URL in an explorer page and all works great.In my app I use this:
webservice.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
What alternatively can I use to get credential inside and outside of my net?
View 4 Replies
Aug 12, 2010
In asp.net, I can define a custom error page like this:
<configuration>
<system.web>
<customErrors mode="On">
<error statusCode="404" redirect="/servererrors/404.aspx" />
</customErrors>
</system.web>
</configuration>
Now my question: If I replace, say 404.aspx with AnyHTTP.aspx, and want to get the number of the http error to generalize the page, how do I get that error numer?
View 8 Replies
Oct 7, 2010
I am working on Asp.net 3.5 page where I am displaying SSRS 2008 report in Reportviewer. But I am getting below error.
The request failed with HTTP status 401: Unauthorized.
Exception Details: System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
Below is my code.
[Code]....
View 1 Replies
Feb 16, 2010
I need to send a Customized Error page for 503 Errors produced by my asp.net website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.
View 3 Replies
Feb 10, 2011
I hace created a webservice, that is on one server and then I created a web application on another server to consume that webservice. My web application uses threading. In my web application, I call the webservice and it returns me the response. Then my thread sleeps for 20 minutes and then it again calls webservice, but when i call the webservice second time , it fails. Here is the error and stack trace:-
Stack Trace:- at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at TransactionExport.LocalWebService.TransactionExportStaging.GetDays(String projCode) in C:inetpubwwwrootTransactionExportWeb ReferencesLocalWebServiceReference.vb:line 102
at TransactionExport.TransactionExport.LoadDays() in C:inetpubwwwrootTransactionExportExport.vb:line 267
View 4 Replies
Nov 2, 2010
I have a webservice (ASMX) which I have tested locally using built-in VS web server. It works fine in the Dev environment, and there was no configuration of anything in IIS for this kind of webservice to work.
Today when I deployed my site on the live server, I got a 500 error when the webservice is being called. The website doesn't work, and unfortunately the client did not test this on staging (same server)
Here's the sample call to my service.
$.ajax({
type: "POST",
url: 'http://www.mydomain.com/services/someservice.asmx/MyMethod',
data: "someid=564",
dataType: "xml",
success: function(msg){
}
In Firebug, http://www.mydomain.com/services/someservice.asmx/MyMethod returns error 500 internal server.
I called the service using jQuery AJAX, the live server is Windows Server 2008 Standard.
View 1 Replies
Sep 9, 2010
I have a asp.net c# web application with contains reports in remote processing mode. I am using the report-viewer control to render the reports. When I run the application in debug mode, I'm able to view my reports however when I publish the application to a different server I get this error message:The request failed with HTTP status 401: Unauthorized.
My report server is on a different server than the location of my published web application. I have added new role assignment to my report server and also added to my web.config but the error persists. I think I am missing something in my aspx page for reportviewer.
View 1 Replies
Apr 20, 2010
I am connecting to remote server for web service using ASP.NET 3.5 web site. something like, [URL]. Remote server is providing digest authentication to access the web service. I dont have access to modify authentication on the remote server but I have an windows account on that server. If I try to Access service WSDL through programming I get the following error:
The request failed with HTTP status 401: Unauthorized. Same web service if I try to access through browser, [URL], it asks for user name and password. Entered windows account user name and password, still getting error: You are not authorized to view this page, HTTP Error 401.1 - Unauthorized. How to pass the digest authentication credentials to the web service through visual studio or any other programmatic method?
View 1 Replies
Jan 9, 2011
I'm writing an HTTP handler in ASP.NET 4.0 and IIS7 and I need to generate a file-not-found condition.
I copied the following code from Mathew McDonald's new book, Pro ASP.Net 4 in C# 2010. (The response variable is an instance of the current HttpResponse.)
response.Status = "File not found";
response.StatusCode = 404;
However, I found that the first line generates the run-time error HTTP status string is not valid.
If, instead of the lines above, I use the following:
response.Status = "404 Not found";
Then everything seems to work fine. In fact, I even see that response.StatusCode is set to 404 automatically.
My problem is that I don't want this to fail on the production server. So I'd feel much better if I could understand the "correct" way to accomplish this. Why did the first approach work for Mathew McDonald but not for me? And is the second approach always going to be reliable?
View 1 Replies
Jun 18, 2010
I am trying to consume a webservice. I added the web reference. But when i try to access the method, I am getting the error as:"The request failed with HTTP status 401: Unauthorized."The web service has username as "user1", password as "pass".I tried this:
Service1.TestPrcsService serv = new Service1.TestPrcsService();
serv.PreAuthenticate = true;
serv.Custom_methodname(true);
How to pass the username and password to access the method?
View 2 Replies
Apr 11, 2010
when i am adding service reference the Following erro shows Up..where as the same works on the Other machine. The url when tested in Internet explorer works but only while adding shows the error. The request failed with HTTP status 403: Forbidden. The HTTP request was forbidden with client authentication scheme 'Anonymous'.
View 5 Replies
Dec 2, 2010
I am having problem redirecting error when error is http 500 or http 403 locally running this site there is no problem it gets redirected to my errorpage.aspx. But when deployed at server, it does not get .tried putting try and catch in page_load and in global.asax and I have set Application_Error to redirect to that page and also set <customErrors defaultRedirect to that page also
error
statusCode="500"
redirect="/errors/errorpage.aspx?error=500"
/>
View 9 Replies
Jan 13, 2010
I successfully implemented role based authorization in ASP.NET. When a person does not have the needed role he gets to see an error page for 401.2 not authorized.
What I would like to accomplish now is to have a custom 401 page in my application and have it redirected there via settings in the web.config. I tried this:
<customErrors mode="RemoteOnly" defaultRedirect="GenericErrorPage.htm">
<error statusCode="401" redirect="NoAccess.htm" />
</customErrors>
But this does not get caught. Do I have to override it in IIS instead? I hope not as that would make getting things deployed harder.
View 1 Replies
Jul 7, 2010
I wrote an ASP.NET page that requires HTTP Basic authorization, which I put in the Page_Load function:
void Page_Load(object sender, EventArgs e)
{
string auth = Request.Headers["Authorization"];
if (string.IsNullOrEmpty(auth))
{
Response.StatusCode = 401;
}
else
{
string[] usernameAndPassword = Encoding.UTF8.GetString(Convert.FromBase64String(auth)).Split(':');
string username = usernameAndPassword[0];
string password = usernameAndPassword[1];
Login(username, password);
}
}
When I try to view the page in a browser (either Firefox or IE), it asks me for the username and password, and then...asks me for the username and password again.
Why does this happen, and how can I fix it?
View 1 Replies
Aug 22, 2010
In ASP.NET you can set the Response.StatusCode to for example 404. Should the status line / description always be set? (to in this case "404 Page Not Found")
How do you get the description if you only have the code (404)? Is this somewhere in the framework or do you manually have to hardcode the descriptions?
View 3 Replies
Feb 7, 2011
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
View 4 Replies
Feb 21, 2011
I have the following error:
"The request failed with HTTP status 401: Unauthorized"
When i try to use an web site (hosted in IIS on Machine1) call a reporting service report using reportviewer (hosted in SQL Server in Machine2)
I already add Networking service permissions to SSRS in Machine2, but the error continues..
View 5 Replies
Nov 15, 2010
I'm new Developer in Web Servicei use VS.2005 C# 2.i have 3 Client PC With Webservice Doing some calculation & Server with ASPX pages the server side will call the client LocalHost webService to do some calculation & return Valuethe problem i get error Massege (The request failed with HTTP status 404: Not Found.)
using System.Web;
using System.Web.Security;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using System.Web.UI.HtmlControls;
[code]...
View 1 Replies
Jul 28, 2010
I'm experiencing a really confusing error. Exactly every other time the page returns
ERROR [23000] [DataDirect][ODBC Progress OpenEdge Wire Protocol driver][OPENEDGE]Integrity constraint violation:uniqueness constraint violation (7518)and else it works nicely.
Here's the SQL:
SELECT SlsOrder.Orderdate, SlsLine.LineNum, CASE WHEN SlsLine.AllDelivered = 1 THEN 'X' ELSE '0' END AS 'AllDelivered', Item.ItemName, Item.TechName, SlsLine.IntDlvDate, SlsLine.OrderNum, SlsLine.ItemCode, SlsLine.Version, CEILING(SlsLine.Qty) AS 'Qty',
Item.QtyUnit, ROUND((SlsLine.Price*SlsLine.Qty),2) AS 'rowSum', ROUND(SlsLine.Price,2) AS 'Price', IFNULL(SysText.InfoText, '-') AS 'InfoText' FROM PUB.SlsLine INNER JOIN PUB.SlsOrder ON (SlsLine.OrderNum=SlsOrder.OrderNum) INNER JOIN PUB.Item ON (SlsLine.ItemCode=Item.ItemCode)
LEFT OUTER JOIN PUB.SysText ON (SlsLine.SlsLineKey=SysText.SysTextKey) AND SysText.NoteType = 'OrdConfRowE' AND SysText.ConsTxt = '' WHERE (SlsLine.OrderNum = '" & o & "') ORDER BY SlsLine.LineNum
View 2 Replies
May 4, 2010
I created a web site in ASP.NET 2005 and I am trying to add a web service located on another server. I can call manualy from IE the web service by pasting the URL below. I can type USER ID & PASSWORD and when I click INVOKE I get approval. When I try to add web refence to my web site for using web service I get error "The request failed with HTTP status 400: Bad request: request-line invalid." and I cannot add reference. [URL] What could be the problem?
View 7 Replies
Feb 22, 2011
The app_offline.htm file that ASP.NET serves returns the http status 503. This is the correct behavior for most situations. However, in the scenario where a specific URL is requested (e.g. [URL]), I'd like to change the returned http status to 200, while still returning http status 503 in all other situations. Is this possible?
The reason why I want to do this is whenever we do scheduled maintenance on our website, we use the app_offline.htm file, but we don't want our uptime monitoring service [URL] to report downtime during our scheduled maintenance.
I assume this would have to be at the IIS level because the app_offline.htm gets served very early on in the request processing cycle.
View 6 Replies
Nov 11, 2010
have a web application hosted on Windows Server 2003 SP2 with IIS 6. I use ASP.net Web Forms and ASP.net AJAX.Some times, when clicking on a button to perform an action the web application does bot respond to the user.After debugging i have found that ErrorSys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 413
View 3 Replies
Oct 28, 2010
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
View 4 Replies