I need to send a Customized Error page for 503 Errors produced by my asp.net website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.
View 3 Replies
In asp.net, I can define a custom error page like this:
<configuration>
<system.web>
<customErrors mode="On">
<error statusCode="404" redirect="/servererrors/404.aspx" />
</customErrors>
</system.web>
</configuration>
Now my question: If I replace, say 404.aspx with AnyHTTP.aspx, and want to get the number of the http error to generalize the page, how do I get that error numer?
In my asp.net web site I have custom error pages defined as following in my web.config file.
<customErrors mode="On" defaultRedirect="~/defaulterror.htm" >
<error statusCode="404" redirect="~/404.htm" />
When file is not found it correctly display 404.htm page but the issue is when I do Fiddler trace it returns 302 as HTTP status code.This is a big issue for search engine page indexing due to this lot of broken links still have been indexed recently because of this in my web site. how can I prevent returning 302 as HTTP status code for file not found errors and return 404 for file not found errors.I am using asp.net 3.5.
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
I am having problem redirecting error when error is http 500 or http 403 locally running this site there is no problem it gets redirected to my errorpage.aspx. But when deployed at server, it does not get .tried putting try and catch in page_load and in global.asax and I have set Application_Error to redirect to that page and also set <customErrors defaultRedirect to that page also
error
statusCode="500"
redirect="/errors/errorpage.aspx?error=500"
/>
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.
In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).
void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
Basically I want to take the following:And make it match the styling of the rest of the application.I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.
View 3 RepliesI have just installed IIS manager version 6.1 build 7600 and visual studio 2010 (latest additions of both).
I have followed all the instructions and given the correct permisions ect for IIS to work with my directory. I have a helloworld website that has worked via the localhost server many times, but almost hourly something happens to the settings in IIS and it starts throwing errors.
The current error copied below. Basically I am wondering a few things...
1. Why does my IIS constantly do something so that it works one minute and then it wont the next (this is with an identical helloworld.htm file so I know it is not something I am doing with the file that is messing it up).
HTTP Error 500.0 - Internal Server Error
Calling LoadLibraryEx on ISAPI filter "C:WindowsMicrosoft.NETFrameworkv4.0.30128aspnet_filter.dll" failed
Module
IIS Web Core [code]......
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....
I try to upload web application to the server. After that I access it through http://..., but get
[Code]....
I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module
IIS Web Core
Notification
BeginRequest
[Code]....
Config Source:
18: <validation validateIntegratedModeConfiguration="false"/>
19: <handlers>
20: <remove name="ChartImageHandler"/>
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information »
I'm very new to ASP and have been writing a site which has been working fine both in development and on my production server.
However I added some reports to my site and now it works fine when I run debug on my local machine, but when I package the solution and move it onto my production server I get:
HTTP Error 500.23 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I'm suing server 2008 STD X64 with IIS7. I've made sure all my windows updates are done.
I've no idea whats causing this. I've tried removing the pages with reports on and I still get the same issue.
I want put custom error page in my website so I wrote below code in web.config
<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>
is it correct?
or I should put other code?
In my website users can create thier own websites by making folder of thier choice like: [URL] Where the folders Pankaj and Adam are storing in database. I just want that when user after creting thier website just clicked or type the address of thier website as [URL] then if the folder with name Pankaj exists in database then the page will open otherwise it gives the http 404 page not found error. And while the address [URL] is opens then i donot want to physically create it on server. My requirement is that i want to open it by the concept of url rewriting/ Routing. Which one concept will be good for this. And can anyone provide some code with example that how can i achieve this easily.
View 2 RepliesI have a website which works perfectly fine with IIS6 on a remote server. I switched hosting to an IIS7 server and now I get the following error:
Error Summary
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Here's my Application_OnError event sink in global.asax.vb:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub
You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'
Here's the relevant web.config entry:
<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>
So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.
We've also tried this:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub
Which unsuprisingly doesn't work either.
I have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
As my app gets deployed on diff servers so I have to display the Top banner on the error page depending upon which server it is on.Can I customize the customerror page?
View 3 Repliesi am preparing error pages, and configuring web.config file as
<system.web>
<customErrors mode="On" defaultRedirect="Error/Index">
<error statusCode="404" redirect="Error/Error404"/>
<error statusCode="403" redirect="Error/Error500"/>
</customErrors>
..................
later i am doing an error in a view page to see the error.
for example i am writing browser (localhost:5006/Home/46546465asjdas) and "Error/Error404" is working well.
but i am writing in view page
[Code].....
defaultRedirect="Error/Index" page not working.
I am trying to create a 404 error page and currently I have all of the following/tried all of the following to try and accomplish this. When the user types in :
http://name/something.aspx
It works just as its supposed to. But if the user types in:
http://name/NotAFile
with no .aspx then IIS7 takes matters into its own hands and I get the lovely error page that IIS7 comes with. The goal is that the site redirects with only a 404 status code (so not a 200, or a 302 redirect). I have tried in both the web config with:
<customErrors mode="On" defaultRedirect="~/error/Default.aspx redirectMode="ResponseRewrite">
<error statusCode="404" redirect="~/error/NotFound.aspx" />
</customErrors>
This works for the url with a .aspx file extension but not for no extension. Same with this approach in the global.asax
void Application_Error(object sender, EventArgs e)
{
var serverError = Server.GetLastError() as HttpException;
if (serverError != null)
{
if (serverError.GetHttpCode() == 404)
{
Server.ClearError();
Server.Transfer("~/error/NotFound.aspx");
}
Server.Transfer("~/error/Default.aspx");
}
}
The same results are present for this :( My final attempt was to apply this to the web config:
<system.webServer>
<httpErrors existingResponse="PassThrough" />
</system.webServer>
With this I just get a plain white screen with nothing on it...
For some reason, when I get an ASP.NET runtime error, it's not loading my custom error page
<customErrors mode="On" defaultRedirect="app_offline.htm" redirectMode="ResponseRewrite">
<error statusCode="404" redirect="app_offline.htm"/>
[code]...
That's in my web.config.I'm still getting this though and it's not loading my error .htm page:Server Error in '/' Application.Runtime Error,Description: An application error occurred on the server.The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons).It could, however,be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
[code]...
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
[code]...
I have inherited the an asp.net app. So i want to add the custom Error Handling. I know there are two methods i can do this.
1) Web Config
2)Global.asa
So i started with the web config just to see how it will look and i accessed the page that normally gives an Exception. so basically i have a page gives a
500 - Internal server error.
There is a problem with the resource you are looking for, and it cannot be displayed.
So now , if there is an Error i want it to go to that Error Page. In the web config i have the Following
Code:
<customErrors defaultRedirect="content/ErrorPages/SupportError.aspx" mode="On">
<error statusCode="404" redirect="content/ErrorPages/SupportError.aspx" />
<error statusCode="400" redirect="content/ErrorPages/SupportError.aspx" />
<error statusCode="500" redirect="content/ErrorPages/SupportError.aspx" />
</customErrors>
This means that when this kind of Errors occur it should redirect to that page. All these pages are contents of the Master page including the Error page. But this Error Persist it does not show me the Error page. Even if i try to see if it goes to "Application_Error" in the Global.asa nothing goes there.
So i have also tried the second option. so i turned the web config part "off" and i trapped this in the global.asa like this
Code:
Sub Application_Error(ByVal sender As Object, ByVal e As EventArgs)
Server.Transfer("~/Content/ErrorPages/SupportError.aspx")
'Response.Redirect("~/Content/ErrorPages/SupportError.aspx", False)
End Sub
But still nothing happens ...
I am using a custom error page in IIS 6:<customErrors redirectMode="ResponseRedirect" mode="On" defaultRedirect="Error2.aspx"/>I want to disable authentication for the custom error page because the error being raised is related to an authentication module and I don't want to get into an infinite loop and I want to display a clean error page to the user. I have been trying the following configuration to do that.
<location path="Error2.aspx">
<system.web>
<authentication mode="None"/>
[code]...
