Non-existant Page Returns 302 Status When Using A Custom 404 Page?
May 17, 2010
I have setup a custom 404 page custom404.aspx that returns a "404 Not Found" error correctly, however the non-existant page that was initially requested returns a "302 Found" status.So when I test thispagedoesnotexist.aspx, it returns a "302 Found" then the custom404.aspx loads and returns a "404 Not Found" status.I want to make sure that search spiders/bots understand that the requested page does not exist and should not show up in any search results.
View 4 Replies
Similar Messages:
Nov 29, 2010
In my asp.net web site I have custom error pages defined as following in my web.config file.
<customErrors mode="On" defaultRedirect="~/defaulterror.htm" >
<error statusCode="404" redirect="~/404.htm" />
When file is not found it correctly display 404.htm page but the issue is when I do Fiddler trace it returns 302 as HTTP status code.This is a big issue for search engine page indexing due to this lot of broken links still have been indexed recently because of this in my web site. how can I prevent returning 302 as HTTP status code for file not found errors and return 404 for file not found errors.I am using asp.net 3.5.
View 3 Replies
Jun 17, 2010
I am wondering if there is anyway to grab the html that is generated from an ASP page.I am trying to pull a table from the page,and I foolishly used a static html page so I would not have to be constantly querying the server where this page resides while I tested out my code.The javascript code I wrote to grab to unlabeled table from the page works.Then when I put it into practice with the real page and found that the ASP page does not generate a viewable page with a jquery .get request on the URL.
Is there any way to query the page for the table I need so that the ASP page returns a valid page on request?(I am also limited to using javascript and perl for this,the server where this will reside will not run php and I have no desire to learn ASP.NET to solve this by adding to the issue of proprietary software)
View 2 Replies
May 15, 2010
My Question is related to access the rows in one page and putting conditions in another page.I need to check whether a datagrid has row in it or not. DataGrid is in .aspx page. Based on this checking i need to write a condition in .ascx page.the .ascx on which condition is checked is linked to .aspx page. Meaning that UserControl1.ascx is Register with Default.aspx pageI am using VS 2003let me know if any input is needed from my side.
View 2 Replies
Apr 16, 2010
I have a page with a (gridview nested within a gridview) in an UpdatePanel (UpdateMode="Conditional"). The nested gridview drops down when you click on an arrow and then you can click on each subgrid rows command field. The gridviews are loaded from the Page_Load event. When I click on the commandfield in the subgrid the Page_Load fires during the partial page postback. From what I have read this is normal with UpdatePanels. But What I don't understand is why both Page.IsPostBack and ScriptManager.GetCurrent(Page).IsInAsyncPostBack test false after I click on the command field in my grid. I need to stop the rebinding of the gridviews ( which causes the subgrid to collapse ) when the command field is clicked.Also: I am using MasterPages and the <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> is located in my mater page form section.Would anyone have any suggestions how to test if a partial page postback is occuringHere is a link to the page source: http://pastebin.org/153774here is a link to the code behind: http://pastebin.org/153781
View 2 Replies
Mar 30, 2010
I am using server.transfer to redirect from one to another page... lets say when i click on button1 of page1 i redirects to page2 using server.transfer but than when i refresh that page2 , it get postback and redirects me page1 again..
server.Transfer("~/admin/mypage.aspx?msg=A",False )
server.Transfer("~/admin/mypage.aspx?msg=A",True )
View 1 Replies
Mar 11, 2011
I have issues with resource language translations.
When page load all contents are displayed according to selected language from master page.
But when page is post back, page forgets language value and returns English language.
View 3 Replies
Jan 31, 2011
I am using the aspnet membership features and check to make sure the user is logged in before display the page:
Protected
Sub Page_Load(ByVal sender
As
Object,
ByVal e
As System.EventArgs)
Handles
Me
.Load
'Check for UserName
If Context.User.Identity.Name
Is
Nothing
Or IsDBNull(Context.User.Identity.Name)
Or Context.User.Identity.Name =
String.Empty
Then
Response.Redirect(
"~/Login.aspx"
)
End
If
Session(
"UserName"
) = Context.User.Identity.Name
UserName.Text = Session(
"UserName"
)
UserIDValue.Text = Membership.GetUser().ProviderUserKey.ToString()
End
Sub
Everything was working fine when I had two separate applications (two web.config files) using the same data base and the same "applicationName" in the web.config files...............
View 2 Replies
Mar 28, 2011
We have a webpage with dotnet framework 3.5 and c# as backend language.
This page is triggering a load process from Excel to database. User want to see the status of the load process like how many records have been loaded every 1 minute.
User want to see it without the page refresh plus, technically it restart the load process also.
View 5 Replies
Oct 28, 2010
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
View 4 Replies
May 16, 2010
I use this type of cache code on my pages
<%@ OutputCache Duration="60" VaryByParam="*" VaryByCustom="browser" %>
An issue by example. I have a page with the asp.net 2 (MSVS 2005) membership menu controls <asp:logonview etc on them. This control show different menus depending on if the member is logged on or not. I am using forms cookie authentication. The sequence of events. Page1 has the above cache settings and a logonview menu control on it. I am not logged on. I goto Page1. I view the page, and the logonvew control shows the button to logon. So correctly it has not detected a membership cookie and shows the logon button. I log on. I go back to page1, yet the logonview has not updated the menu for the newly logon status, as the page is sourced from the cache. I have to wait 60 seconds before the page can be rendered correctly. When the page is updated for logon status, the menu button for logon does not show, it should show Welcome Member Joe Bloggs. How can all pages cache be cleared when a log on happens, so there is not cache limbo, and the logonview menu control shows the correct status always?
View 2 Replies
Jan 30, 2011
I have tried everything, even uninstalling asp.net mvc3, and I can't get HandleError global filter working.I have set up the HandleError filter in the Global.asax:
public static void RegisterGlobalFilters(GlobalFilterCollection filters)
{
filters.Add(new HandleErrorAttribute());
}
Also I have CustomErrors enabled (it does not matter if i set defaultRedirect="Error" or not, I think that is in the docs because is needed for older versions of mvc):
<customErrors mode="On" />
Trying to navigate through the page until the error gets raised, wether you do from localhost or using the hostname, inside the development server or IIS 7.5, it always redirects to a standard status 500 page, instead of my custom Error.cshtml view that I have created in Shared. Here is Error view code:
@model System.Web.Mvc.HandleErrorInfo
@{
ViewBag.Title = "Oooops";
}
<h2>Ooops Something really bad happened!</h2>
Also I have noted that if I create a new ASP.NET MVC3 project and then select "Internet Application" template, and just enabling customErrors in that project, then the HandleError filter starts working just fine, however using the empty MVC3 template does not.I want to clarify, that indeed I can see the error view being processing when debugging, however the browser always display Error 500 page.
View 3 Replies
Feb 25, 2010
The effect I want is that a status message band "slides" open after an action.I'm trying to implement this with an updatepanel in the master and setting it's control values from the web page, who's content is in another UpdatePanel in the master. in pseudo-markup:
[Code]....
I figure I could use an ajax accordion or something for the expanding effect...But I can't figure out the event timing and how to update the status message. If I update it within an exception in the child page, the message doesn't get displayed.How can I pass a status message to the master and have it displayed in the manner I explained?
View 2 Replies
Feb 8, 2010
I have a aspx page with 5 validation control, if the data is not proper it will say fill the Name, address etc. i want to get status of validation control either true or false in javascript how to get it that
View 3 Replies
Mar 29, 2010
I am using a custom error page in IIS 6:<customErrors redirectMode="ResponseRedirect" mode="On" defaultRedirect="Error2.aspx"/>I want to disable authentication for the custom error page because the error being raised is related to an authentication module and I don't want to get into an infinite loop and I want to display a clean error page to the user. I have been trying the following configuration to do that.
<location path="Error2.aspx">
<system.web>
<authentication mode="None"/>
[code]...
View 3 Replies
Oct 27, 2010
I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..
<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>
master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..
View 1 Replies
Sep 9, 2010
I'd like to capture the http referrer url following the rendering of a custom error page.I have this set in my web.config
<customErrors mode="On">
<error statusCode="500" redirect="/StaticError.aspx" />
</customErrors>
In the OnLoad(EventArgs e) event -- I'm trying to do this, but it appears to be too late.this.txtReferrer.Text = Request.UrlReferrer.ToString();Is it possible to capture the referrer url?
View 1 Replies
Nov 19, 2010
I've a got an Asp.Net site that is using Forms authentication, I've also got custom errors configured in the web.config. One of these is a special error page for 403's (access denied). My question is how do I get Forms authentication to work smarter?
I would like Forms authentication to send users to login page only if they are not authenticated. If they are I want it to defer to the custom error pages that i've defined in the web.config. This seems like something very basic, how can this be achieved?
[code]....
View 1 Replies
Dec 3, 2010
I set my web.config with a custom error for 404 and 403 response but when I try to navigate my page (not exist page). It displays the default IIS6 404 page instead of my custom page...
[Code]....
View 5 Replies
Sep 3, 2010
I'm new to AJAX and ASP.NET and i have a question for you guys..I have built a C# project and i wish to create a web page via AJAX that displays the current status of my program.The thing is, i cant import an ASP web application into my solution and therefore cant create an ASP page using AJAX.
View 3 Replies
Jan 7, 2010
I wrote a web services with Windows authentication, when i consume this WS from my app inside my network all work great, but when I consume this WS outside my network the WS return "The request failed with HTTP status 401: Unauthorized"I'd try the URL in an explorer page and all works great.In my app I use this:
webservice.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials;
What alternatively can I use to get credential inside and outside of my net?
View 4 Replies
Apr 17, 2010
I'd like to be able to determine what class will be called given an URL. For instance, I have a page /First.aspx that has a hyperlink to /Second.aspx In the code behind for First.aspx.cs, I'd like to be able to determine what class will execute if someone clicks on the hyperlink that points to /Second.aspx.
EDIT: One of the reponders asked me to outline the problem I'm trying to address. Here it is: The codebase I inherited has a subclass the System.Web.UI.Page that has a public Authorized method that returns a boolean. The Authorized method checks the parameters passed via the query string against the authenticated user, and determines whether that user should be allowed to call that page with the given parameters.
Elsewhere in the site I have hyperlinks that reference those protected pages. In some instances those links are displayed to users who are not authorized to navigate to that page. They can click the link, however they get an error. In other instances, prior developers when through the trouble of inserting logic that hides the hyperlink for those unauthorized users, but the authorization logic is duplicated (In the page itself, and in the linking page). What I would like to do is create a subclass of the hyperlink class, and have the subclass inspect the NavigateUrl, determine the destination page class, and call the Authorized method of that class to determine if the user is authorized to call that page. If the user is not authorize, the link will automatically hide itself.
View 2 Replies
Jul 28, 2010
I'm experiencing a really confusing error. Exactly every other time the page returns
ERROR [23000] [DataDirect][ODBC Progress OpenEdge Wire Protocol driver][OPENEDGE]Integrity constraint violation:uniqueness constraint violation (7518)and else it works nicely.
Here's the SQL:
SELECT SlsOrder.Orderdate, SlsLine.LineNum, CASE WHEN SlsLine.AllDelivered = 1 THEN 'X' ELSE '0' END AS 'AllDelivered', Item.ItemName, Item.TechName, SlsLine.IntDlvDate, SlsLine.OrderNum, SlsLine.ItemCode, SlsLine.Version, CEILING(SlsLine.Qty) AS 'Qty',
Item.QtyUnit, ROUND((SlsLine.Price*SlsLine.Qty),2) AS 'rowSum', ROUND(SlsLine.Price,2) AS 'Price', IFNULL(SysText.InfoText, '-') AS 'InfoText' FROM PUB.SlsLine INNER JOIN PUB.SlsOrder ON (SlsLine.OrderNum=SlsOrder.OrderNum) INNER JOIN PUB.Item ON (SlsLine.ItemCode=Item.ItemCode)
LEFT OUTER JOIN PUB.SysText ON (SlsLine.SlsLineKey=SysText.SysTextKey) AND SysText.NoteType = 'OrdConfRowE' AND SysText.ConsTxt = '' WHERE (SlsLine.OrderNum = '" & o & "') ORDER BY SlsLine.LineNum
View 2 Replies
Apr 21, 2010
I have 2 iframes in my page and 2 separate pages linked to each of these iframes. In one iframe page a tab control is placed with treeview on each tabs and the tree items are selectable (treeview with checkbox). On navigation of one tab from other an XML document stored in session is being updated with the selected treenode values.
The second iframe page is places on right side of the page which summarize the selected made on the each tabs. To do this, the page is getting loaded on tab navigation and in page load of that page, the treeview id created and displayed. We created the treeview as an object and kept in session variable then added into a panel. The only modified areas require to be updated instead of binding the entire tree on each tab's navigation.
1. The treeview must retain it's collapse/expand status on tab navigation which is not happening now.
2. When I set EnableClientScript property to true, I'm getting error on expand/collapse as Undefined 'somenodename' error. If I set the value as false, then postback is happening which should not.
View 1 Replies
Jan 26, 2011
I have a gridview with column name:
Pending, Waiters, Opened
and in the rows under column there are figures like:
30, 50, 28
65, 0, 214 etc.
My program is working fine, when I am clicking 30, a new page opens and displays 30 rows, when I click 28 another page opens and displays 28 rows and so on.
In datatable there is a column named Stauts, actually Pending, Waiters,Opened are the status.
In dataset in table adapter I used thress queries one for "Pending", second for "Waiters" and third for "Opened".
To display data I created three pages with gridviews.
I used query like:
Select * from ..... Where status ='Pending'
Select * from ..... Where status ='Waiters'
Select * from ..... Where status ='Opened'
What is Required:
I want to make one query with status =@status and want to use header name in query or in vb.net coding and want to make only one page to display record.
To put my question as an idea/example I used three status but in real scenarion I have lot of status. If I have lot of status so I have to make lot of queries and have to create lot of aspx pages to display data in gridview that is not the correct logic.
View 4 Replies
