MVC :: Error In Subview Master Page Not Show The Custom Error Page On Entire Page ?
Oct 28, 2010
I am showing Custom Error in my page.if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page.I am attching the Screen shot.Can any body help me out how to show the Error page on entire page if something happend in any where submaster or other page.Here is the code that I am using in web config file to show custom Error page..
[CODE]...
Here I know the issue what's going on.This issue is occurring because i am using AJAX to partially load the contents of the tabs after the initial page load so the error is occurring AFTER my master page has been loaded.What I need to do is provide a javascript function to handle the error after the ajax call has returned and redirect to the error page.How to write this Javascript and where Do I need to write this?
View 4 Replies
Similar Messages:
Oct 27, 2010
I am showing Custom Error in my page.. if somehting happend wrong. but if the same error occured in my subview master page I am not able to show the Custom error page on Entire page its showing me that Error page under subview master page. Please I am attaching the Screen shot. how to show the Error page on entire page if something happend in any where submaster or other page.. Here is the code that I am using in web config file to show custom Error page..
<customErrors mode="On" defaultRedirect="~/Home/Error">
<error statusCode="403" redirect="~/Home/Error" />
<error statusCode="404" redirect="~/Home/Error" />
</customErrors>
master page I have all the js files and Css files links and I have submaster page for mainmaster page.. sub master page have three tabs each tab has grid control.if something went wrong I can able to show the Custom Error page but its showing me in submaster page.. not in main master page.....but if something hapend any where I need to show CustoM Error page in main master page..
View 1 Replies
Jul 6, 2010
I want to show a "Custom error page" when i type a non-existing .aspx or .html page in my application. I had followed the same steps in the link [URL] for the HTML pages also but it is working for .aspx pages but not working for .html pages if I enter any non-existing pages. I had added the path of "aspnet_isapi.dll" for the .html extension in the IIS. I also ensured that the check box "Verify file exists" is unchecked while adding the ".html" entry in the "configuration" of the "Home directory" of the website in the IIS but still it is not working.
View 1 Replies
Feb 7, 2011
I was wondering if someone could point me in the right direction:
How do I generate a custom error page with the error message and get it to mail me that error message?
Is there a good tutorial out there that someone could point me 2.
View 4 Replies
Jul 27, 2010
How can I configure ASP.NET/IIS to show custom error pages (i.e. a nice friendly error page), but to still return a 404/500 status code so that google does not try to index the page? I have tried setting the Response.StatusCode to 404, but then the nice error page does not show anymore.
View 2 Replies
May 7, 2015
I have a data driven asp.net website with frames on the top, left, right and center screen. If a page generates an error on any of the frames, I want to redirect the whole site back to the Default.aspx. Currently, when a frame page errors in one of the frames, that frame gets the error pages. Site is URL.... Is this something that can be handled?
View 1 Replies
Mar 13, 2010
i have a asp.net page that have its master page and it contain RadioButtonList1 and i try to do thefollwing
<script type="text/javascript">
var radioButtonList = document.getElementById('<%=RadioButtonList1.ClientID%>');
if(radioButtonList[0].checked)
document.getElementById("_secondTR").style.display = "block";
else if (radioButtonList[1].checked )
document.getElementById("_secondTR").style.display = "none";
}
</script>
<table style="width: 100%">
<tr id="Tr1">
<td>
<asp:RadioButtonList ID="RadioButtonList1" runat="server" BackColor="#FFCC99"
RepeatDirection="Horizontal" Width="117px" onclick="ShowHide()">
<asp:ListItem Value="1">Yes</asp:ListItem>
<asp:ListItem Value="0">No</asp:ListItem>
</asp:RadioButtonList>
</td>
</tr>
<tr id="_secondTR" runat="server" style="display: none">
<td>
<asp:RadioButton ID="Five" runat="server" GroupName="1" BackColor="#669999" />
<asp:RadioButton ID="Four" runat="server" GroupName="1" CausesValidation="True" BackColor="#669999" />
</td>
</tr>
</table>
i can't get RadioButtonList1 from java script ...
View 2 Replies
Jun 24, 2010
This is an ASP.NET web app built using VS2008. I created a standalone class with a method that exports the entire page, text fields, gridviews, images, everything to an Excel worksheet. It works fine. When I dropped the same class in another web app and tried to call it from a page, I get this error message:
[Code]...
View 8 Replies
Mar 29, 2010
I am using a custom error page in IIS 6:<customErrors redirectMode="ResponseRedirect" mode="On" defaultRedirect="Error2.aspx"/>I want to disable authentication for the custom error page because the error being raised is related to an authentication module and I don't want to get into an infinite loop and I want to display a clean error page to the user. I have been trying the following configuration to do that.
<location path="Error2.aspx">
<system.web>
<authentication mode="None"/>
[code]...
View 3 Replies
Sep 9, 2010
I'd like to capture the http referrer url following the rendering of a custom error page.I have this set in my web.config
<customErrors mode="On">
<error statusCode="500" redirect="/StaticError.aspx" />
</customErrors>
In the OnLoad(EventArgs e) event -- I'm trying to do this, but it appears to be too late.this.txtReferrer.Text = Request.UrlReferrer.ToString();Is it possible to capture the referrer url?
View 1 Replies
Nov 19, 2010
I've a got an Asp.Net site that is using Forms authentication, I've also got custom errors configured in the web.config. One of these is a special error page for 403's (access denied). My question is how do I get Forms authentication to work smarter?
I would like Forms authentication to send users to login page only if they are not authenticated. If they are I want it to defer to the custom error pages that i've defined in the web.config. This seems like something very basic, how can this be achieved?
[code]....
View 1 Replies
Mar 7, 2011
I'm having a wicked time trying to redirect the different error scenarios to a custom error page. Basically, I have put some code in Application_Error in global.asax, and done the necessary web.config settings to use Custom Errors.
In global.asax on Application_Error, I stored the Server.GetLastError in Session. The reason I have to store it in Session is because (as far as I know) you lose the exception when using "ResponseRedirect". And the reason I have to use ResponseRedirect is because I am using an UpdatePanel with AJAX calls, and any exception during the AJAX call shows up as a JavaScript error, and doesn't get handled using the custom error page (see this post).
void Application_Error(object sender, EventArgs e){ ////must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { Session["LastException"] = Server.GetLastError(); } else { // (I think this happens when there are compile-time errors) Server.Transfer("~/Oops.aspx"); }}void Session_Start(object sender, EventArgs e){ //must perform this check to avoid the "Session state is not available in this context" errors if (HttpContext.Current.Session != null) { //initialize the session (http://forums.asp.net/t/1405077.aspx) Session["LastException"] = ""; }}
View 3 Replies
Jul 2, 2012
I am trying to handle the unhandled exceptions in my project.I tried with this following code in my web.config filebut it is not at all redirecting to an error page which i have created instead of that it is throwing an exception in my code itselef. How to print the error description over therein my custom error page.
---------------------------------------------------------------------------------------------------
<sys.web>......<customErrors mode="On" defaultRedirect="~/Error.aspx"></customErrors>...</sys.web>
---------------------------------------------------------------------------------------------------
And even i tried in Global.asax page in Application_Error() method like below
Exception ex = Server.GetLastError();Response.Redirect("~/Error.aspx?errmsg="+ex.message);Server.ClearError();
And in my Error.aspx.cs page i have placed a label and i have written code like this
protected void Page_Load(object sender, EventArgs e) {
Label1.Text=Request["errmsg"];
}
But it is not getting redirected my error page and not displaying anything on it.
View 1 Replies
Feb 22, 2010
When I add an update command to my page and run the page I get this error message
Server Error in '/MYApplication.
Incorrect syntax near '-'.Must declare the scalar variable "@recnum".
Description:An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: Incorrect syntax near '-'.Must declare the scalar variable "@recnum".
Source Error:
[Code]....
Stack Trace: [Code]....
Version Information: Microsoft .NET Framework Version:2.0.50727.3082; ASP.NET Version:2.0.50727.3082
Here is my code
<asp:SqlDataSource
ID="SqlDataSource1"
runat="server"[code]....
View 4 Replies
Nov 30, 2010
my C# console appliccation code is shown below :-
[Code]....
In my application a mail message send to particular recipeeient with msg body contains a hyper link.. when the recipent click on this link,it will redirect to another form(InternalForm.aspx)... bt when clicking the link error is occured,whuy its happening???? In InternalForm.aspx,page load portion access the link content(badgeno).. page load portion code of InternalForm.aspx is shown below:-
[Code]....
View 7 Replies
Feb 16, 2010
I need to send a Customized Error page for 503 Errors produced by my asp.net website. I have tried to simulate the condition by switching off the application pool (doesn't work) and by flooding my application with requests. Even though IIS sends me the default 503 error page, and even though I have tried setting a Custom URL in IIS and ASP.NET for this error code, it still returns me the default 503 error page.
View 3 Replies
Mar 20, 2010
I have a page inside my folder ( say Admin Folder , Page1.aspx ) and I want to use the Master Page which is placed Outside the folder.
with Intellisense I am getting like this ~/Mymaster.master", but at run time it is throwing an error.
View 4 Replies
Jan 28, 2010
I've watched Joes video on [How Do I:] Use the ASP.NET AJAX Timer Control? I'm trying to do a similar thing but using this control on a Masterpage. I then create Content page from the master, but the banners do not show on this page.
View 6 Replies
Jun 18, 2010
Basically I want to take the following:And make it match the styling of the rest of the application.I am creating a custom error page in my C# based project and I want it to be able to show the same information that is displayed in the ASP.NET default error page. From fiddling with reflector I can see that this is generated through HttpException.GetHtmlErrorMessage() but when I try to use this in my exception it returns null.
View 3 Replies
May 7, 2015
I want put custom error page in my website so I wrote below code in web.config
<httpErrors errorMode="Custom">
<remove statusCode="404" subStatusCode="-1" />
<error statusCode="404" subStatusCode="-1" prefixLanguageFilePath="" path="error-404.aspx" responseMode="ExecuteURL" />
</httpErrors>
is it correct?
or I should put other code?
View 1 Replies
Aug 31, 2010
i have create dynamic menu control , i have master page and login page , once the user login , i want to show the dynamic menu in my master page. below i try to call masterpage control in my child page ,but i throughs the error
Object reference not set to an instance of an object.
my master page code
public partial class MasterPage : System.Web.UI.MasterPage
{
protected void Page_Load(object sender, EventArgs e)
{
}
public string MyProperty
{
set
{
// lblUser.Text = value;
lblUser.Text = value; // here i got the error
}
}
}
My child page code
protected void btnwork_Click(object sender, EventArgs e)
{
((MasterPage)this.Master).MyProperty = "Text changed from Sub Page";
}
View 5 Replies
Mar 9, 2010
[Code]....
Parsing Error in Master Page
View 1 Replies
Mar 24, 2010
Here's my Application_OnError event sink in global.asax.vb:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Dim fourOhThree As Integer = DirectCast(HttpStatusCode.Forbidden, Integer)
Throw New HttpException(fourOhThree, innerMostException.Message, innerMostException)
End If
End Sub
You'll see that if we've got an innermost Exception of type AccessDeniedException we throw a new HTTPExcpetion with a status code of 403 AKA 'forbidden'
Here's the relevant web.config entry:
<customErrors defaultRedirect="~/Application/ServerError.aspx" mode="On">
<error statusCode="403" redirect="~/Secure/AccessDenied.aspx" />
</customErrors>
So what we're expecting is a redirect to the AccessDenied.aspx page. What we get is a redirect to the ServerError.aspx page.
We've also tried this:
Sub Application_OnError(ByVal sender As Object, ByVal e As EventArgs)
Dim innerMostException As Exception = getInnerMostException(Me.Context.Error)
If TypeOf innerMostException Is AccessDeniedException Then
Security.LogAccessDeniedOccurrence(DirectCast(innerMostException, AccessDeniedException))
Context.Response.StatusCode = DirectCast(HttpStatusCode.Forbidden, Integer)
End If
End Sub
Which unsuprisingly doesn't work either.
View 1 Replies
Jun 23, 2010
As my app gets deployed on diff servers so I have to display the Top banner on the error page depending upon which server it is on.Can I customize the customerror page?
View 3 Replies
Feb 7, 2011
i am preparing error pages, and configuring web.config file as
<system.web>
<customErrors mode="On" defaultRedirect="Error/Index">
<error statusCode="404" redirect="Error/Error404"/>
<error statusCode="403" redirect="Error/Error500"/>
</customErrors>
..................
later i am doing an error in a view page to see the error.
for example i am writing browser (localhost:5006/Home/46546465asjdas) and "Error/Error404" is working well.
but i am writing in view page
[Code].....
defaultRedirect="Error/Index" page not working.
View 15 Replies
