i have a details table which include detailid, custname, address, classification , pincode, telephone, remarks and classification table contain classification id & classification.i want to insert detailid & corresponding classificationid to a new table detail_classification. How to write stored procedure for that?
View 1 RepliesI'm using below stored procedure to reterive data and i'm displaying it in datalist... Now i want to reterive data from two tables by using this stored procedure...collegedetails is my table name... I want data from coursedetails also.
CREATE PROCEDURE [dbo].[SearchInstitute]
@startRowIndex int,
@Category varchar(500),
@inst_name varchar(500),
@course_name varchar(500),
@city varchar(500),
@pageSize int,
@totalCount int output
AS
BEGIN
SET NOCOUNT ON;
SET @totalCount = 0
SET @startRowIndex = @startRowIndex + 1
BEGIN
SELECT * FROM
( SELECT distinct *, ROW_NUMBER() OVER (ORDER BY ArticleList.clgid DESC) as RowNum
FROM (
Select distinct collegedetails.*
FROM collegedetails
WHERE category like '%' +@Category+ '%' OR inst_name like '%' +@inst_name+ '%' Or city like '%' +@city+ '%'
) as ArticleList
) as ArticleList1
WHERE RowNum BETWEEN @startRowIndex AND (@startRowIndex + @pageSize) - 1
ORDER BY clgId DESC
SELECT distinct @totalCount = Count(clgId) FROM collegedetails WHERE category like '%' +@Category+ '%' OR inst_name like '%' +@inst_name+ '%' Or city like '%' +@city+ '%'
END
END
I'm a novice in .NET programming. I was trying to figure a way to make a MULTI TABLE search via a stored procedure for my website. I've written a SP to select records from one table, which isn't working for some unknown reasons:
[Code]....
Whatever I search for, the datagrid is displaying all records from my table.
I have DAL Layer, from where invoking a stored procedure to insert values into the table.
E.g.:-
[code]....
Now as requirement changed, per client request i have to add values 5 times. So what is the best practice?
Do i call this Stored Procedure 5 times from my DAL?
I have an application that uses an aps:GridView. The GridView is populated using a DataSource that calls a Stored Procedure. The DataSource passes parameters to the Stored Procedure based on some text fields. The page has been running slower than wanted, so I was doing some checking.
I ran SQL Profiler while loading the page, and saw the Stored Procedure was being called twice. I stepped through the code and found out that in the Page Load Complete event was where this was happening. In this event, I set the value of a parameter for the Stored Procedure, then did a DataBind on the GridView to pick up the data. As I was stepping through the code, I watched the SQL Profiler. When I got to the step of setting the parameter, the Stored Procedure had not yet been called. When I stepped through that and got to the DataBind command (before running that step), the SQL Profiler showed that the Stored Procedure had been called. Then I did the DataBind and the StoredProcedure was called again.
My question is, how do I get the parameters set, and get the GridView data bound, and only call the StoredProcedure once? If I comment out the DataBind step, the StoredProcedure never does get called (which seems really strange to me...).
[Code]....
i have a stored procedure with this values and i need just to make a button that will send something to "Equip" column,how to do it? write the values on my webpage and make a button to exec the procedu
what is the recommended data access strategy for the following environment: single stored procedure, many parameters, asp.net 4.0, sql server 2008, and the stored proc returns 11 different recordsets, all of which get displayed in various different elements too complex and specific to be handled by server controls.
View 1 RepliesI want to insert username and password into two tables (say table1 as well as table 2) using stored procedure.
View 4 Repliesi want data to drop down list using stored procedure .
However im not able to do that.
I have storedprocedure which returns four or more dataset!
example here
How load and display all data in Default.aspx....
dataset 1
............................................
dataset 2
............................................
dataset 3
............................................
dataset 4
............................................
I use below code in SP to count row of table and show it in label
ALTER procedure [dbo].[showMessage]
as
begin
SET NOCOUNT ON
select (select COUNT(id) from Message) as Message
,(select COUNT(id) from MessageM) as Messagem
end
[CODE] ...
Now I want define other label that shows total of these two table rows .I mean if in Message Table has 7 row and MessageM tabel has 8 row so
LblNMR =7 and LblRM =8
Now I want define LBLMAIN that in this label show LBLMAIN=15 total of 2 tabel Rows
How I can do it ?
I have a form that has a textbox, a button and a datagridview. The textbox is a parameter of @subschedule. I'm needing to pass the value of the text box to my sql stored procedure and then fill my datagridview with the results of that query.
I have the following code thus far:
[Code]....
When i bind gridview to stored procedure what i found it only shows data after enabling Autogeneratecolumns and it also doesnot show any column in boundedfield. Due to which i am unable to apply formating to individual column according to my requirement. One possible reason may be table is created in stored procedure due to which it generate fields at run time.
View 7 Repliesuse html tags ( <table> <tr>..<td></table> ) in stoted procdure and display asp.net page with table
View 1 RepliesI have three tables: Book, author and Book_Author. The third table make them one to many relation.One book may have more than one authors. Book table has Title column and Author table has AuthorName Column.
I have this query to display BookID, Title, AuthorName where name display in single query separating by comma.
What is the best way to create procedure or view so that I can call this query and display into repeater ??
[Code]....
find the names of tables refered in a perticular stored procedure
View 10 RepliesI want to update two tables using stored procedures but my data not updating to data base
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlClient;
namespace INV_DN
{
public partial class Form1 : Form
{
SqlConnection con;
SqlDataAdapter da1;
SqlCommand cmd;
// SqlCommandBuilder cb;
DataSet ds;
public Form1()
[Code].....
This is surareddy. i nead some small clarification in the "Stored Procedure"
how to convert the oracle Stored Procedure to sqlserver2005/2008 Stored Procedure.
right now i am enhancing the project that project already developed the oracle Stored Procedure. now our company is using sqlserver 2005/2008.
how to convert the Oracle Stored Procedure to sqlserver 2005 Stored Procedure
Initially, I have tried to use stored procedure. But I changed my mind and preferred to call sql query in codebase with command text. However, it stills tries to find initially-called stored procedure (which is neither called or exists).I think that it is related caching. But I tried it with different browsers it did not work.What might be the reason?
View 4 RepliesIs it possible to use dynamic query filters with a gridview using a stored procedure as a data source? What I'm thinking of is a search page where there are multiple controls to enter in a search string and a radio button for the AND/OR query filters between the various controls. If not, what would be the best way to allow a user to select an AND / OR with a group of different query controls?
Here is the page I have created thus far using a view and no AND/OR option. I but I can't get it to work with my SP, also listed below:
[code]....
I am migrating a application and using asp.net 3.5 and in a page i want to display some data in grid where coulmn heading comes from one stored procedure, another procedure for Row heading and another procedure for row data.
Can we do like this in Grid view? or I need to go for HTML Table to display the data. Previously it was done in Vb6.0 using Flexigrid.
I created 3 product table . A,B and c.
I show product of table in different gridview.
Now I am using one search box. but how to search product name with image in one query all of three table....
Simple how to search product from multiple table and show result...
Just after some advice I have a stored procedure that returns several tables. I then need to loop through the tables and create dynamic gridviews using the data. At the moment this stored proc is called using
[Code]....
I have used an xsd file to populate everthing else, but due to this returning multiple tables i wasn't sure how this works should it just be in its own xsd? as all the oather i just get a datatable where as with this i need a dataset... how this makes sense...
suppose the stored procedure is like this
create procedure tttt
(@EMP_CODE VARCHAR(15)
)
AS
SELECT * FROM demand_month where(EMP_CODE=@EMP_CODE
SELECT * from demand_week where EMP_CODE=@EMP_CODE
go
How to display it in a gridview
Is it possible to return multiple values from a stored procedure? Basically, if I execute the stored proc on the C# side, then on the SQL side I do multiple calculations. Let's say I have 5 int values I need returned to the C# side.
View 4 Replies