DataSource Controls :: BCP Creates A Blank File?
Apr 12, 2010
I'm trying to automatically backup some registers of my database using bcp through asp.net. My approach is to create a temporary table with the data I want to save, use bcp to save the table to a txt file and the delete the table. My code is this:
[Code]....
For some reason, the sql command works perfectly in SQL Server, but doesn't even create the file when running in asp.net. Even if I create the file it just keeps blank with a 0kb size.
I tried deleted the command where the temporary table is deleted to check if it was a matter of that table deleting too quickly, but it still doesn't creates a single row on the table.
View 1 Replies
Similar Messages:
Jun 11, 2010
I have two folders in my asp.net web application in which I create new folders programmaticaly. The entire solution is under VSS source control. I was not able to manipulate these two folders programmably. For that, I gave {MACHINE}ASPNET user account full control over these two folders. Still, the "access denied to the path" error was coming. I saw that these entire folders were marked readonly. I tried to uncheck Readonly from explorer but not successfull, readonly check does not get removed. Also, if I copy files using method, the destinationn copied file becomes readonly. I have also tried File.SetAttributes (path,FileAttributes.Normal); but no success. How can I make the copied file not READONLY?
View 1 Replies
Dec 29, 2010
LinqtoSQL / asp.net MVC / C#
Ok, here is the problem:I drag and drop my database table into dbml, so i have new table diagram on dbml.For example, I have User table which has two columns(ID, NAME)Then something.design.cs automatically generates User class and definitions for ID, and NAME.
for example: [Code]....above code is automatically generated onto something.designer.cs then I made change on something.designer.cs :
[Code]....
then i added new column in database table named "Password" if i delete old diagram in dbml and drag new table, it re-writes whole something.designer.cs file, so i lose all codes i wrote before.I googled it and people say about Partial class, but i dont know how to use partial class.
View 3 Replies
Jan 20, 2011
I've been using the FilterExpression for the building of my GridView. I've built with this ability before, normally for searching for the name of an individual. However, the new project I'm working on has a small problem. I'm using an AND statement to filter the name via textbox and I'm also checking if the form was completely finished and if the form is reviewed via radio buttons.
Below is the code, but the problem is this. If any of the fields are blank (text field is left blank or the "both" is selected from the radio buttons) the form doesn't process my filter.
Is there an easy way to apply all three filters in a mix and match fashion (like no name, completed, not reviewed or any combination thereof)?
[Code]....
View 10 Replies
Oct 29, 2010
I'm working on resource files in windows application. After i'm adding the resource file in the project if i built the project it creates a separate folder for each language with language code(Spanish->es-ES, French->fr-FR..) and also it has one dll file for corresponding langage inside the folder. Why it is creating like this? Can't we avoid this?
View 2 Replies
May 21, 2010
I have a DataTable that's populated with Data. I'm looping through it and checking to see what the contents of the first cell of the first column are. If they have the same value on the current iteration as the previous, I want to insert a blank row into my DataTable. The problem is that the new row is being added to the end of the DataTable instead of between the two rows. How can I get it not to append the row to the end. This is what I'm doing:
[Code]....
View 3 Replies
Jun 11, 2010
[Code]....
View 2 Replies
Jan 29, 2011
i hav a gridview ... now i need to add certain number of rows... say 5 rows .... which would b blank .. the rows consist of itemtemplate of textboxes.. here is the grid ...
[Code]....
now i am binding this gridview with certain data say :
[Code]....
now the problem is if the row contains 2 data originally ... then it alwz shows up with only two rows with binded data... but what i want is 2 (databinded rows ) + 5 (empty rows with textbox ) = 7 grid view rows .... now how to do it ... after i hav binded the textbox with data already....with some empty columns corresponding to the above code ?
View 5 Replies
May 14, 2010
I am having problem with calculated columns in the following code
[Code]....
orderDT is the DataTable. When "Extra" column has nothing (I am NOT using Default), "Total" comes out to be blank? "Price" will have a value (always) "Extra" may not have any value
View 7 Replies
Apr 7, 2010
I have a 20 to 30 fields on a form. Most of them are optional. However, the users can fill out what they want. If a user dosen't fill in a field when data is sent to the database it's sent as blank, instead of NULL. Is there a way I can generically say "for all textboxes if Equals("") then DBNull.Value". Without going through each and every textbox?
View 2 Replies
Nov 11, 2010
I working on a ASP.net project, database is MS SQL
for a reason that cannot find why, when I insert an entry to the data base, the entry is duplicated.
The controll runs this:
Protected Sub grdCustomer_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles grdCustomer.SelectedIndexChanged
Dim Quote As New QuoteBLL
Dim Customer As New BeeSafeShutterSystemTableAdapters.CustomerTableAdapter
[Code]....
View 3 Replies
Jul 21, 2010
I have two test machines that both have the same issue. I have one running IIS7.5 with Windows 2008 R2 and another server running IIS7 on WIndows 2008. I am having a problem with my Web.config files not being published to the server using WebDAV. The file seems to be replaced with a blank Web.config file. Since the Web.config file is blank non of my AJAX web pages are working. I have AJAX web pages that use Microsoft's AJAX 2.0 or 3.5 (they were created in Visual Studio 2008) and I have AJAX web pages that use pure javascript accessing Codebehind classes by AjaxPro2.dll I found on the Web. All these projects worked on Windows Server 2003 with ASP.NET v3.5 because it published the Web.config file.I believe the issue has something to do with the validation process Windows 2008 uses to make sure the Web.config file is not corrupt. I tried many Web.configs and nothing works. All my applications are running from a single root folder located in inetpubwwwroot
and that single folder is "converted to application" using the DefaultAppPool (ASP.NET v2.0 Integrated Mode).
I found a workaround which is to publish my normal Web.config and a copy of it name something else like Web2.config. The Web.config is replaced on the server with a blank one, which I delete directly from the server (via Remote Desktop) and I rename the other Web2.config. This works for all my AJAX webpages both the MS AJAX and the "native" ones using pure javascript and the AJAXPro2.dll.
I tried setting the application on IIS to another Application Pool "ASP.NET v4.0 Integrated" and my MS AJAX web pages work perfectly with the blank Web.config file and not using the workaround at all. However, the "native" AJAX using purjavascript and the AJAXPro2.dll do not work because they require settings in the Web.config. This means there is something that ASP.NET 4.0 has that allows it to run the MS AJAX without a proper Web.config. I thought this might help you figure out my problem.
I have been racking my brain over this for a few weeks now and I am stuck. I really need help with getting my Web.config file from my VS2008 applications to publish (via WebDAV) to my IIS server. I can do this in either setup IIS7.5 Windows Server 2008 R2 or IIS7 Windows Server 2008. I am a programmer not system administrator. I have admin access of these servers and the system adminstrator is also stumped.Let me know if you need any additional information like my Web.config file or log files from the server.
View 1 Replies
Mar 15, 2011
I am using following code to get the columns from excel into datatable. In that in my excel file columns started from C to E means columns A and B is blank(Headers also). When i am reading excel file into datatable that time it's taking columns C to E. I want A and B also.Means when i am reading file that time blank columns are avoiding. I want blank columns should be read.
Excel File Data:
A B C D E
1 2 3
5 6 7
And in Datatable i am getting:
C D E
1 2 3
5 6 7
So i want Columns in Datatable also just like excel.
String
connString = ApplicationSetting
.GenerateExcelProvider(FilePath);[code]....
View 4 Replies
Apr 25, 2012
I used your code over here [URL]
for creating a csv but the csv that gets created is blank. My gridview gets populated so I don't think any problem with that not getting data from Access database. I also tried the code sample you have on this website and checked my code against yours.
View 1 Replies
Sep 20, 2015
When I select the Search By dropdown, an additional gridview is created on auto-postback.I will ad a visual and code as soon as this is accepted for review.
View 1 Replies
Jan 30, 2013
I have a upload control in which i browse for the filename but I get the filename as "" (blank) ,
filename= uploadphoto.PostedFile.FileName
View 1 Replies
Dec 7, 2010
How to create a Grid view with 3 blank Row without any Datasource or use (Datatable ) in code behind
it means
Sl.no ID Name
1
2
3
it means no blank ID ,Name
View 8 Replies
Jun 2, 2010
I have a form which a user can fill in x times with the data they want too. The form is posted to the following Action.
[HttpPost]
public ActionResult Manage(ProductOptionModel DataToAdd)
{
if (!ModelState.IsValid)
{
return View(DataToAdd);
}
var ProdServ = new ProductService();
if (DataToAdd.ID != 0)
{
//Edit Mode.
DataToAdd = ProdServ.EditProductOption(DataToAdd);
ViewData["Message"] = "Option Changes Made";
}else
{
//Add
DataToAdd = ProdServ.AddProductOption(DataToAdd);
ViewData["Message"] = "New Option Added";
}
var RetModel = new ProductOptionModel() {ProductID = DataToAdd.ProductID};
return View(RetModel);
}
So at the bottom I blank the model (Leaving just the required field) and then return to the view. However the view holds the data from the previously submitted form. I have debugged the code and checked that the RetModel variable is empty.
View 2 Replies
Sep 13, 2010
How do I create a schema.ini file from a tab delimited file?
I have this so far:
[myFile.txt]
ColNameHeader=True
Format=TabDelimited
CharacterSet=ANSI
I think I need something like this after my last line from above:
Col1=first TEXT width 150
My text file has 7 columns, the first row is the header row. The data comes from a Micosoft SQL Server Database where the fields are of the following types:
int
nvarchar(MAX)
nvarchar(50)
View 1 Replies
Mar 10, 2011
I'm working on setting up a Gridview that dynamically creates new "columns" after a set amount of rows. To do this, I bind a datasource to the Gridview and then add new cells and shift the other items into those cells. I seem to be having an error with the link buttons that I move around. All of the items get put in there correct location, but for some reason, when I click a link button that has been added to a new cell, the sender's text is the LinkButton in the original cell's text. Does anyone know why this would be happening? Is the gridview not meant to be manipulated after it has been data bound? This is the code that I use to update the gridview.
[Code]....
View 2 Replies
May 17, 2010
I have created a label and a dropdownlist. The label has the dropdownlist as associated id.If I click on the label and then uses the mouse up or down the dropdownlist creates a postback for each click. This is quite anoying and doesn't happen if you click on the dropdownlist and uses key-up or key-down, or if you uses another browser than IE.Is it possibel to fix this, so you can use key-up and key-down without causing a postback, and first on the enter-key creates the postback (as it does if you click on the dropdownlist and not label)?
View 2 Replies
Jul 22, 2010
isn't present databound event on asp repeater server control?I just want to bind all my data, and at the end creates a new ItemTemplate and add it, but just when is all data binded
View 1 Replies
May 10, 2010
I have been searching for some information on how to import my xml file into a series of tables using a mapping file (schema).
View 2 Replies
Mar 25, 2010
Is it better to store images directly in a database or to just store the name of the file in the db and display that file? I would think that just storing the filename of the image would keep the db size low...
View 1 Replies
Mar 7, 2010
I've a pre-supplied public function in classic asp that creates a hash value - it is pretty complex and I'd rather not convert it to .net if at all possible (mainly as I don't understand half of what it does!) I'm running it under IIS7 on VWD2008 express. How would you call a function in that asp file? do you have to redirect or as it is #included into the asp.net file, is there an eaiser way? At the moment the complier does not spot the function and says it is not declared.
View 2 Replies