DataSource Controls :: Inserting A Blank DataRow Into A DataTable?
May 21, 2010
I have a DataTable that's populated with Data. I'm looping through it and checking to see what the contents of the first cell of the first column are. If they have the same value on the current iteration as the previous, I want to insert a blank row into my DataTable. The problem is that the new row is being added to the end of the DataTable instead of between the two rows. How can I get it not to append the row to the end. This is what I'm doing:
[Code]....
View 3 Replies
Similar Messages:
Jun 16, 2010
I have a dataset that has around 5 rows. I also have another Datarow() array that has an additional 3 rows which I would want to add to the dataset. The structure of both the Dataset Rows and the Datarow arrays are the same.
Do I have to perform a loop on the datatrow arrays and add them one by one? or is there a better way of adding them in one go ?
View 3 Replies
Jul 22, 2010
I want to delete the rows present in the DataTable by using LINQ (with out looping)
The deleted rows will be come from a LINQ as below
IEnumerable<DataRow> MobileQuery = (from d in dtBillDetail.AsEnumerable()
where (String.Compare(d.Field<string>("Destination"), "MOBILE", StringComparison.InvariantCultureIgnoreCase) == 0) select d );
The DataRows present in the "MobileQuery" should be deleted in the DataTable "dtBillDetail"
View 1 Replies
Mar 28, 2010
I have taken a DataTable control and have added colums to it. Now i want to add rows to that DataTable but when i am trying to create a DataRow of DataTable, an error is generated, showing "Value of type 'System.Data.DataRow' cannot be converted to 'dataRow'".
exact coding that i have written is as follows:
[Code]....
So, where i am getting wrong?
View 2 Replies
Feb 7, 2011
I have a 3 column datatable in a session. I know I can use DataAdapter to do the insert but i only need to insert 2 of the columns.
View 3 Replies
Oct 19, 2010
I have a method like
public DataRow
GetItem(ENTITY_TYPE
EntityType, long EntityID)
This fetches a row and returns it. Pretty simple.
However I can't test in the method to see if the row was fetched, as the method has to end with:
return ds.Tables[0].Rows[0];
If the row wasn't fetched, this errors as there is no row at position 0.
I can't do this:
DataRow dr;
if (ds.Tables[0].Rows.Count
== 1)
{
dr =
ds.Tables[0].Rows[0];
}
return dr;
.. because then I get an error that I can't return an uninitialised variable (dr).
I can't stipulate what the columns are and return a "blank" DataRow as far as I can see, because it's dynamic so I don't know what the columns will be. There doesn't seem to be a way to instantiate the DataRow return var except by assigning, er, a DataRow. Which I may not have.
I don't really want to switch to using the ItemArray and pass arrays about, I'd rather just pass the DataRow object as this is in a loop which might process a lot of rows.
View 2 Replies
May 14, 2010
I am having problem with calculated columns in the following code
[Code]....
orderDT is the DataTable. When "Extra" column has nothing (I am NOT using Default), "Total" comes out to be blank? "Price" will have a value (always) "Extra" may not have any value
View 7 Replies
Dec 7, 2010
How to create a Grid view with 3 blank Row without any Datasource or use (Datatable ) in code behind
it means
Sl.no ID Name
1
2
3
it means no blank ID ,Name
View 8 Replies
Jan 5, 2011
I m trying to cast DataTable.Rows to DataRow in VB but could not manage!
Here is the sample code:
[Code]....
View 2 Replies
Jan 23, 2010
I want to convert an datarow array into datatable.. Wat is the simple way to do this?
View 3 Replies
Feb 10, 2011
I'm fairly new to ASP.NET and am working through a tutorial that demonstrates the use of DataAdapter, DataTable, and DataRow classes. The tutorial focuses on binding returned DataTables to GridView objects - I'm having trouble understanding what to do to extract one row for display. I've found I can do the following:
ProductsTableAdapter productsAdapter = new ProductsTableAdapter();
Northwind.ProductsTable productsTable = productsAdapter.GetSingleByProductID(searchID)
Northwind.ProductsRow productRow = (Northwind.ProductsRow)productsTable.Rows[0];
A ProductsTable should be able to return its own ProductRows w/o resorting to a cast, no? Can't find how to do it otherwise. I'm thinking how to go about creating a form where the user will only ever be working on one record at a time. Wouldn't it make sense for the DAL to return a ProductsRow instead of a ProductsTable?
View 1 Replies
Feb 3, 2010
[Code]....
View 8 Replies
Jan 18, 2011
I have a field of type smalldatetime in a sql table. through a webform, i am trying to insert a blank value(i.e. through A blank text box) but its showing an error that the" value can not be recognized as valid date time". I am using a textbox to insert value to this field. but that text box can also be blank sometimes. plz help.
View 4 Replies
Jan 11, 2010
i have the dataset with one table.Table contains three column like 'Name','Location','Pin'.I would like to move the data from another table based on schema.
View 2 Replies
Sep 1, 2010
I'm trying to insert few values to a table, when i press the submit button the aspx page goes blank and i don't get any error message. I'm not able to find where the error is.
The code:
Protected Sub AddMInfo_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles AddMInfo.Click
View 5 Replies
May 14, 2010
I have two datatables, I want to get all records which are in one datatable but all matching records which exist in another datatable should not be available.
In terms of set, you can say that record which are in 1st datatable but not in 2nd DataTable.
View 13 Replies
Mar 15, 2011
I am using following code to get the columns from excel into datatable. In that in my excel file columns started from C to E means columns A and B is blank(Headers also). When i am reading excel file into datatable that time it's taking columns C to E. I want A and B also.Means when i am reading file that time blank columns are avoiding. I want blank columns should be read.
Excel File Data:
A B C D E
1 2 3
5 6 7
And in Datatable i am getting:
C D E
1 2 3
5 6 7
So i want Columns in Datatable also just like excel.
String
connString = ApplicationSetting
.GenerateExcelProvider(FilePath);[code]....
View 4 Replies
Aug 9, 2010
This is the first time I have been working on databases and I am trying to insert data using an object datasource but no data is being inserted and no exception is thrown. I'm not sure where I am going to wrong. I am putting user data into session variables and inserting the session variables into the dataacess class layer and have a try and exception but nothing being thrown. Any help would be really appreciated because I don't know even where to start looking with this or how I can get the error to be thrown. Please see some of my code below to give an idea of what I am doing
Object Access Class
public void InsertCarPolicyHolder(PolicyHolderClass ph, CarInsuranceOptions options)
{
[code]...
View 2 Replies
Apr 12, 2010
I'm trying to automatically backup some registers of my database using bcp through asp.net. My approach is to create a temporary table with the data I want to save, use bcp to save the table to a txt file and the delete the table. My code is this:
[Code]....
For some reason, the sql command works perfectly in SQL Server, but doesn't even create the file when running in asp.net. Even if I create the file it just keeps blank with a 0kb size.
I tried deleted the command where the temporary table is deleted to check if it was a matter of that table deleting too quickly, but it still doesn't creates a single row on the table.
View 1 Replies
Jan 20, 2011
I've been using the FilterExpression for the building of my GridView. I've built with this ability before, normally for searching for the name of an individual. However, the new project I'm working on has a small problem. I'm using an AND statement to filter the name via textbox and I'm also checking if the form was completely finished and if the form is reviewed via radio buttons.
Below is the code, but the problem is this. If any of the fields are blank (text field is left blank or the "both" is selected from the radio buttons) the form doesn't process my filter.
Is there an easy way to apply all three filters in a mix and match fashion (like no name, completed, not reviewed or any combination thereof)?
[Code]....
View 10 Replies
May 10, 2012
after a query execution i get the data in datatable which is binded to grid.
i need to insert data frm this data table to a sql temp table but with only few selected columns
View 1 Replies
Jun 11, 2010
[Code]....
View 2 Replies
Jan 10, 2010
I'm linking a form to sql database, As far as i know for textbox the code will be like this one below in VB:
dashDataSource.InsertParameters.Add("databaseColumName", NameOFTextBox.Text)
But what is the code for a drop down menu for countries list?
View 3 Replies
Nov 24, 2010
I have a formview that is working fine for with the exception of the username is not inserting on a new record. The username is visible on login so I know that is working. I'm attaching my sql code as well as the code behind as I don't know what I'm missing.
[Code]....
View 10 Replies
Apr 19, 2010
When I m trying with my code to insert a name like "Cédric" the field in the Database is empty.Here is my code for the insert function :
[Code]....
Here is the code that call this function :
[Code]....
View 9 Replies
