DataSource Controls :: Error - Unable To Add A Database To The Project?
Apr 25, 2010
Im trying to add a database to the project, and he following error appears. (Im using VB2008)
Local database file
A network-related or intance-specific error occured while establishing a connection to sql express.
The server was not found or was no accessible. Verify that the instance name is correct and that SQL server is configured to allow remote connections. (provider: Shared Memory Provider, error 40- Could not open a connection to SQL server.
View 3 Replies
Similar Messages:
Jan 7, 2010
I've created a Data Base project with some CLR functions and stored procedures.
I'd like to deploy the assembly under different schema then the default dbo.
Is it possible?
View 4 Replies
Feb 23, 2010
Ok, I have some experience, but I have always started with something and moved on from there.
I want to create a ASP.net Project in MSVC 2008 with the following...
- SQL 2005 database that I can use MSQL Server Management Studio with
- Forms authentication
- Authentication/roles etc is stored in the above database
So far every attempt has resulted in a database that when I attach with MSQL Management Studio I am logged in as guest, and thus can't do much.
View 3 Replies
Oct 17, 2010
I installed vs2003.net on sbs2003 with IIS6 (.net framework 1.1) I created my first app, put a label on webform1 and run the project (debug)
1 - messagebox: "Error while trying to run project: unable to start debugging on the web server. The project is not configured to be debugged (I did a lot of searching, found tons of so-called solutions, but neither works)
2 - run the project from the menu Start without debugging. I got a server-error: <authentication mode = Windows in web.config)
Two questions:
a. when the app runs under VS.2003 it uses IIS ?
b. if not, why doesnot run the app ? if so, which website it uses in the IIS-manager (is that the Default website or other ?). What happens when I delete all the websites in IIS-manager and run the app in VS2003 ?
View 3 Replies
Aug 16, 2010
I try to connect my database for so long so i wrote two type of codes. Let's discuse first on.
I have database called PhoneDirectory.
It have only one table named Residents.
I have button wiht ID="Button1".
I want when i click this button to see all of my residents.
I want to see the result in DetailsView and to be able to edin, delete and add new resident.
First try with SqlDataSource so i wrote this:
<asp:SqlDataSource ID="Resident Details" runat="server" ProviderName="System.Data.SqlClient" ConnectionStrings="<%$ ConnectionStrings:ThisIsTheConnection%>"
View 57 Replies
Feb 14, 2010
Using Visual Web Developer 2008 Express with what I'm assuming is Sql 2008 Express. Using SqlDataSource, when I try to configure a data source, I'm able to input a server name: (local)sqlexpress and the "Test Connection" button shows that it was successful. However, if I type in a new database table name and VWD 2008 asks if I would like to create it, I keep getting the message: "OBJECT REFERENCE NOT SET TO AN INSTANCE OF AN OBJECT." No idea what that means or how to fix it. I can't open theDatabase Explorer View.
View 2 Replies
Aug 22, 2010
I created a ASP.NET project under Visual Web Developer 2008. Under that project I had a Database (along with ASPNETDB.MDF) which has about 3/4 tables (I had SQL server 2008). Everything was working fine (like insert, delete, etc.). And I was able to view the tables in database explorer view.
Then I had to format my computer for some reason and I copied the whole project in a USB drive and then after formatting the computer I copied the folder and tried to open it in Visual Web Developer (now I have VWD 2010). I can see the both Database under App_Data folder (ASPNETDB.mdf and the DB I created). ASPNETDB has all the tables and data as expected. But I do not see the tables under the DB I created.
View 8 Replies
Aug 2, 2010
When debug a project, then error message show:
"Error while trying to run project : Unable to start debugging on the web server. The project is not configured to be debugged."
View 2 Replies
Mar 29, 2011
I recently updated my VS2010 website project from .NET 3.5 to 4.0. Everything was working fine in the website project. Today I decided to migrate the website to a web application project as I have learned this is the best way to work in .NET. I split out all my class files into a separate class library and copied all my other content into my new project. Then I updated all the references and web.config.
When I build the class library, everything works great. The problem is happening when I try to build/debug the web application project. It is acting like all the controls are missing and it is also throwing a bunch of compile errors about the public properties I have in my master pages.
Control errors: "The name 'INSERT CONTROL NAME HERE' does not exist in the current context"
Master page errors:'System.Web.UI.MasterPage' does not contain a definition....
It is giving these errors for every single control and master page property in my entire solution.I notice when I add a new web.form to this project, it also adds a filename.aspx.designer.cs file in addition to the .aspx and .aspx.cs file. My existing files do not have these extra files since they were created in a different .NET version.
UPDATE: It seems I was missing the step where I need to right click on the new application folder and select "Convert to web application". I just did that and it seems to be a little bit better...
Now it is choking on Literals that are inside single quotes:
<div class='<asp:Literal ID="CssClassLiteral" runat="server"></asp:Literal>'>
It doesn't see this literal when it does the conversion... Is the above valid code or should I implement that functionality another way?
View 1 Replies
May 10, 2010
I used visual studio 2008 and sql server 2005(for database) in my website project. After finishing my project i used publish to web option and got the files into an folder. I have installed .NET framework ,IIS, i have also set the remote connection ,firewall setting etc. But when i run i.e., In the IIS manager when i click browse it gives me the following error. Can anyone pls tell me what went wrong in this. My code works fine when run on visual studio 2008. Server Error in '/EBUSINESS' Application.
View 1 Replies
Aug 31, 2010
In Framework 4.0
I have written all Master Page and User Control in one Web Application Form Project called "CommonUI"(Separate Folder), which I couldn't refer to Other Web Application Form Project(Separate Folder).
I got an error as "unable to access another project or web application".
The error is because each project, it treat as a seperate Web Application, How to over come this problem.
In Framework 1.0 I did same thing in Framework 1.0, where I have all User Control as One Web Application Form Project(Separate Folder) and it is referred in other Web Application Form Project(Separate Folder).
View 2 Replies
May 20, 2010
I have downloaded Northwind database here [URL]and at SSMS Express Edition, I attach the database but I'm getting this error User 'guest' does not have permission to run DBCC checkprimaryfile. (Microsoft SQL Server, Error: 2571)
View 2 Replies
Apr 23, 2010
I have install ASP.NET 3.5 and Microsoft SQL Server 2005 on my Vista PC from a Teach yourself in 24 hours. I'm getting the following errors trying to create a Database thru the App_Data. I'm at SP-3 for both Vista and SQL Server 2005.
The First error is:
sqlservr.exe has stopped working A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
The second error is:
Timeout expired. The timeout period elapsed prior to the completion of the operation or the server is not responding. I've searched the internet and have been unable to resolve my problem.
View 9 Replies
Jun 16, 2010
when I make restore to backup database display this error :
The backup set holds a backup of a database other than the existing 'elib' database. (Microsoft.SqlServer.Smo)
how I can solve this error ?
View 1 Replies
Apr 29, 2010
I have some issues about retrieveing and storing date information to my database (ms sql server 2005).My data column is a DateTime, and i have set my web.config globalization culture is set to "en-gb"
When i retrieve date from the datebase it appears as dd/MM/yy, that's fine. But i cannot insert a new date as same format?! It will only accept MM/dd/yy or yy/mm/dd.Right now i'm using this code to correct the error:
[Code]....
Is it possible to change the date format on the database or something, so i dont need to use this code?
View 11 Replies
Mar 23, 2010
I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio.I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem.
I have now set Named Pipes and TCP/IP back to disabled. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message:
"A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)"
My first question here is: why is it returning a Named Pipes error? Why isn't it using Shared Memory? It seems like it is not listening on Shared Memory for some reason?When I set Named Pipes to enabled and try to connect, I get the same error message.My windows account is does not have administrator priviliges on my computer.
View 3 Replies
Apr 6, 2010
I am unable to register my control from another project in my current project. I have a commoncontrols project and a controlpanel project now how can i get the usercontrols from the commoncontrols project?
The controlname is ucReg.ascx.
View 6 Replies
Apr 1, 2010
Now I have SQL server express 2008 fully installed but when I try use use forms authentication, with the login controls, it doesnt generate a database, but states " Failed to generate a user instance of SQL Server due to a failure in starting the process for the user instance. The connection will be closed. " A similar error is given if I try to add a new SQL server database to the project What is wrong with my install ( I am new to SQL Server, but did have 2005 edition which I uninstalled for this version)
View 1 Replies
May 24, 2010
i am using sql express 08 & sql management studio exp 08. I tried to clone a database from another but an error occured. My steps:
[newDatabase] >> right click >> tasks >> restore >> databaseOn general section: from database = [databaseSource] >> backup sets: all checked
On options section: overwrite existing database: checked, recovery state: restore with recoveryClick [ OK ] button The error:
Restore failed for 'MyServerSQLEXPRESS'. (Microsoft.SqlServer.SmoExtended)
Additional information:
System.Data.SqlClient.SqlError: The file 'x:.........databaseSource.mdf' cannot be overwritten. It is being used by database 'databaseSource'. (Microsoft.SqlServer.Smo)
And why sql management studio tried to overwrite the dataSource (not newDatabase)? how to clone a database? I also tried backup databaseSource to file and then restore newDatabase from the file but resulting the same error.
View 3 Replies
Sep 28, 2010
I have an error when visiting my page
The Microsoft Jet database engine cannot open the file 'E:""""""""datab.mdb'. It is already opened exclusively by another user, or you need permission to view its data.
View 1 Replies
Jan 8, 2010
I started a new Sql Server 2008 with mixed authentication Windows and SQL SERVER AUTh... I created a new login account and use it to directly connect in SQL server managment studio BUT... when i create in VS2008 the connectionstring... everytime i try to open the DB connection i take an exception to the login... some screenshots show all the process ;)
LOGIN: admintvmaismais
PASSWORD: ex
Working to connect in SQL SERVER MANAGEMENT...
LOGIN STATUS ON SQL SERVER MANAGEMENTE
Now in VS2008 Web-Config I declare the connectionstring:
<connectionStrings>
<add name="SqlConnectionString" connectionString="Server=JP;Database=tvmaismais;User ID=admintvmaismais;Password=ex;" providerName="System.Data.SqlClient" />
</connectionStrings>
and When i try to open a connection like this:
SqlConnection conn = new SqlConnection(ConfigurationManager.ConnectionStrings["SqlConnectionString"].ConnectionString);
try
{
conn.Open();
...
}
catch (Exception e)
{
retorno = e.Message.ToString();
}
finally
{
if (conn.State == ConnectionState.Open)
conn.Close();
conn.Dispose();
}
I get this exception: Cannot open database "tvmaismais" requested by the login. The login failed. Login failed for user 'admintvmaismais'. What am I missing? What do i need to do, to get this login to work?
View 4 Replies
Oct 5, 2010
I am trying to add a new database via the App_Data Folder and I receive an error described below.When I attempt to add ANY TYPE OF SQL SERVER DATABASE through the App_Data folder I receive this error "Connections to SQL Server Files (*.mdf) require SQL Server Express 2008 to function properly. Please verify the installation of the component or download
from the URl."
I can create a db via SQL Server Mgmt Studio, it connects fine, and I can see tables.
Visual Studio- Server Explorer connects fine to the Database, I can see the tables.
Im running XP SP3 w/ Visual Studio 2010 and SQL Server 2008 R2 Developer. I had previously removed SQL Server Express.
Why cant I access the database within my project, when Im able to connect to this fine within Visual Studio Server Explorer?
View 6 Replies
Mar 10, 2010
i have sql server 2008 and visual studia 2008 install in my system when i open a new website project and then use the asp.net administration tool in that when i go for security tab under that one.
i want to enable roles but it displaying error that unable to connect to sql server database.
View 1 Replies
Jul 26, 2010
I am trying to insert values into oracle database using visual studio 2010 express edition. find the below code I used:
[Code]....
View 2 Replies
Feb 28, 2010
I am getting the error message "SELECT permission denied on object 'MyTable', database 'MyDB', owner 'dbo'.", when trying to run a small asp.net application via a browser where i work.
I built it on my local machine(VS 2008, C#) and transferred over to an IIS server(i.e. Windows Server 2003) and I have also enabled the application folder in IIS.
It runs fine on my local machine. Connection string in web.config on my local machine <add name="connstring" connectionString="Data Source=DBASE;Initial Catalog=MyDB;Integrated Security=true" providerName="System.Data.SqlClient"/>
on the server, connection string is <.......;User Id=userid;Password="mypassword" />.
But when i swapped connection string on server to use <Integrated Security=true>, and tried to run from a browser again, i get:
Login failed for user 'SVRSERVERNAME$'
I have a couple of other apps I built in the past and they are running fine, I didn't do anything special, just transferred them as normal to server and ran through browser
In fact, one of my previous apps even uses the same table and database. but with this new app, I don't know why it wouldn't work even though it runs perfect on my local machine
I can access the database manually from SQL Management studio, i connect to it using my Windows account or the given username/password credentials.
Other thing I noticed, when I changed the connection string on my local machine web.config to use <User Id=userid;Password="mypassword">, i then get same error as if it was running from the server:
SELECT permission denied on object 'MyTable', database 'MyDB', owner 'dbo'.
View 3 Replies
