DataSource Controls :: .Net SqlClient Data Provider - Connections?

Jan 19, 2010

We have developed web application using Asp.net, C# and SQL Server. However, When viewing the Process Info Tool for MS SQL Server, we see lots of processes (150-1000+) with Status = 'sleeping' and Command = 'AWAITING COMMAND' (Application = '.Net SqlClient Data Provider')The DataReaders and Connections are all being closed, but still the sleeping connections are accumulating. The problem becomes so severe that we finally get a "General Network Error" or a "Internal system error" and if we restart IIS. We have tested a lot but no success.

View 5 Replies


Similar Messages:

How To View The Last Ran Sql Query From SqlClient Data Provider On Sql Server 2000

Jul 28, 2010

Although I have been able to see the last ran query which is a Stored Procedure executed but I didn't get the parameters values with which the SP was invoked. Rather I got the following:

StoredProcedureName;1
from the following command:
DBCC INPUTBUFFER(SPID)

Where I got the SPID by viewing it in the ObjectExplorer->Management->ActivityMonitorIs there any way I can get the complete text including the parameters with which the SP was executed ?

View 1 Replies

DataSource Controls :: Error When Run A Sub Select Statement / System.Data.SqlClient.SqlException?

Mar 17, 2010

I get and error when I run a sub select statement. What is wrong with the statement?

[Code]....

[Code]....

ERROR:

System.Data.SqlClient.SqlException: Only one expression can be specified in the select list when the subquery is not introduced with EXISTS.

View 3 Replies

DataSource Controls :: System.Data.SqlClient.SqlException - Error Converting Data Type Varchar To Bigint?

Jan 16, 2010

I have a website having an aunthentication system. When I am setting my website on IIS 6 the code is absolutly working fine. But when i configure the website on IIS 7 (Windows 2008 server) it is showing me the above error. I am using a stored procedure for it

View 3 Replies

DataSource Controls :: System.Data.SqlClient.SqlException: A Severe Error Occurred On Current Command

Feb 3, 2010

I am facing the following problem when i try to add record in database. "System.Data.SqlClient.SqlException: A severe error occurred on the current command.The results, if any, should be discarded." This exception occurs occasionally, and the sql server log shows the following error whenever the above exception occurs:

Server,Unknown,A user request from the session with SPID 54 generated a fatal exception. SQL Server is terminating this session. Contact Product Support Services with the dump produced in the log directory.

View 5 Replies

DataSource Controls :: System.Data.SqlClient.SqlException: SQL Server Internal Error - Text Manager Cannot Continue

May 15, 2010

[Code]....

View 1 Replies

DataSource Controls :: SQL Statement Timeout / System.Data.SqlClient.SqlException: Timeout Expired?

Jan 20, 2010

Hopefully I am posting this in the correct forum.

I am having a problem with my ASP.Net Web application. The application is developed using vb.net and is linked to a SQL Server database. Let me explain how the application works and the problem I am experiencing. The system is an online web app which allows registered users to create a CV online. One of the pages within the app gives users the chance to add a cover note to their CV. The page that allows them to do this consists of only a textarea control and a button control. The textarea allows users to input up to 4,000 characters.

Once the user clicks the 'Save' button to save their cover note info, the following code then executes.This code checks to see if the CV already has cover note info, if it does, then the application runs an update statement, otherwise, it runs an insert statement.The table within the database which records the cover note information is called tbl_covernote and has three columns, covernote_id (int and autoincrement), cv_id(int), covernote_text (nvarchar(max)).

The error which occurs sometimes is as follows:

Dim dr As SqlDataReader
Dim param(0) As SqlParameter
Finally [code]...

View 11 Replies

DataSource Controls :: How To Detect Smo Remote Connections

Apr 19, 2010

I've been playing about for ages in an attempt to get a simple bit of code that can detect whether or not SQL Server is listening remotely or just locally.. My pretty lame attempt so far is as follows:

[Code]....

I'm sure there must be a better way to do this! Aside from the fact that this code fails to work properly.

sp.IPAddresses contains:

- 127.0.0.1
- 0.0.0.0
- 10.0.0.10

When I used Surface Area Manager > Surface Area Configuration for Services and Connections and set Remote Connections to "Local connections only" sp.IPAddresses still contains the same addresses.

View 1 Replies

DataSource Controls :: Managing SQL Connections In A Website?

Jun 18, 2010

My lecturer insists that a web site should NOT have a static SQL connection as its not good practice (didn't explain why) but then I thought that if one makes instances of an SQL connection everytime I want to save, delete or edit then surely thats a bottleneck as I would need to everytime establish a connection and then do the save process. From what I have read online, the process of establishing a connection to the server is the longest (about 5 to 10ms)...

How would one manage their SQL connection. At the moment I do something like:

[Code]....

View 1 Replies

DataSource Controls :: SET ARITHABORT ON For Connections In Linq To SQL?

Jun 4, 2010

the SQL connection option ARITHABORT is OFF for OLEDB connections, which I assume Linq To SQL is using. owever I need it to be ON. The reason is that my DB contains some indexed views, and any insert/update/delete operations against tables that are part of an indexed view fail if the connection does not have ARITHABORT ON. Even selects against the indexed view itself fail if the WITH(NOEXPAND) hint is used (which you have to use in SQL Standard Edition to get the performance benefit of the indexed view).Is there somewhere in the data context I can specify I want this option ON? Or somewhere in code I can do it??I have managed a clumsy workaround, but I don't like it .... I have to create a stored procedure for every select/insert/update/delete operation, and in this proc first run SET ARITHABORT ON, then exec another proc which contains the actual select/insert/update/delete. In other words the first proc is just a wrapper for the second. It doesn't work to just put SET ARITHABORT ON above the select/insert/update/delete code.

View 4 Replies

DataSource Controls :: Onfigure SQL 8.00.2039 To Allow Remote Connections?

Feb 9, 2010

web service show me this errorFailureA network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) App_Code.d-vwopz6my sql version in 8.00.2039 how to configure SQL 8.00.2039 to allow remote connections

View 2 Replies

DataSource Controls :: Server Profiler / ReportServer Has Four Connections After Restart?

Jan 22, 2010

I think I have a problem that I never noticed before. I was just recently (as in tonight) shown the SQL Server Profiler. I noticed that on a video that I watched there profiler did not move unless there was a query to the database, thus making it easy to see what exactly was going on. When I opened mine for the first time and ran it I am getting 9 logs every say 5 seconds. They consist of;

Audit Logout
RPC:Completed
Audit Login
RPC:Completed
RPC:Completed
SQL: BatchStarting
SQL: BatchCompleted
SQL: BatchStarting
SQL: BatchCompleted

Does anyone know if this is normal or my database just working way to hard?

I just restarted the server and checked databases for active connections now that I know nothing is running, and found the one database that is causing the problem... ReportServer has 4 connections after my restart. Should I leave this alone? Is it normal to have this reporting constantly going on?

View 1 Replies

DataSource Controls :: ADOMD Connections To Accessing SSAS Cubes

Mar 19, 2010

I am new to using ADOMD for accessing SSAS cubes. I am having an issue with concurrency. I am using ADOMD to connect to SSAS 2005 in an ASP.Net 2008 application. When a user executes an MDX query and the ASP.net page opens an ADOMD connection, a second user that tries to execute an MDX query gets "a connection is already open" error. I don't understand how ADOMD works. Does it open only one connection for all users because ASP.Net is using a single account for all connections from the web server? I do not have this problem when using ADO.net in the same manner.

View 2 Replies

DataSource Controls :: Verify That SQL Server Is Configured To Allow Remote Connections?

Dec 8, 2010

I am trying to make a small utility program to update a table in a database.

I made it as a asp.net 2008 project and connected to the development SQL server(which is located locally).It is working fine.

Then I try to move this to production, I realized that the sql server is located in another state and I can not connect it this way.( connection string from webconfig and open the connection).I can not change any configuration of the prod sqlserver.

I get error like sql server does not accept remote connection.( Verify that SQL Server is configured to allow remote connections).

View 2 Replies

DataSource Controls :: Verify That SQL Server Is Configured To Allow Remote Connections?

Jun 11, 2010

I am trying to make a small utility program to update a table in a database.

I made it as a asp.net 2008 project and connected to the development SQL server(which is located locally).It is working fine.

Then I try to move this to production, I realized that the sql server is located in another state and I can not connect it this way.( connection string from webconfig and open the connection).I can not change any configuration of the prod sqlserver.

I get error like sql server does not accept remote connection.( Verify that SQL Server is configured to allow remote connections).

View 2 Replies

DataSource Controls :: SqlDataSource Connections Not Closing Maxing Out Connection Pool?

Jul 28, 2010

i have a web application that use a MySql DataBase. In a page, i have used the sqlDatasource control. The problem is that the conection with the database doesn't closed and i have a lot of open conections until show me the error that says me that the conection pool is full.

[code]....

View 9 Replies

DataSource Controls :: System.Security.SecurityException: Request For The Permission Of Type "System.Data.SqlClient.SqlC"

Jul 12, 2010

in my web project i got an error that i couldnt find any solution. the error says: System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. when i work in local there were no problem i put files to our server and i changed the database also. when i work in server in web application in Default.aspx i can connect db and get values without any problem using my DataLibrary

BUT the problem in my web service i also use my DataLibrary in webservice but when i try to run a method in web service it gives me the error which is : System.Security.SecurityException: Request for the permission of type 'System.Data.SqlClient.SqlClientPermission, System.Data, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed.

my new db connection is

strConnectionString = "Data Source=OURSERVERNAME\SQLEXPRESS;Initial Catalog=DoveTR;Persist Security Info=True;User ID=sa;Password=123456789;Pooling=True";

View 1 Replies

DataSource Controls :: Code Behind To Disconnect Temporarily All DB Connections To Backup/copy Database?

Mar 30, 2010

SQL Server Express 2005 MS Visual Studio 2005 Using ASP.NET with VB code behind. Requirements: Click a button on an ASPX page to disconnect temporarily all DB connections when not in use to allow a script to backup/copy the database to a safe backup location. When a user access the db afterwords, the DB connections will be re-established.

If this is imposible, recommend an alternative. Note: I am working with what I have been given and authorized to use.

View 3 Replies

DataSource Controls :: Connections Are Being Pooled Even With "Pooling=False"?

Jan 27, 2010

Recently I bumped a problem with an asp.net application where seemingly random errors were thrown, although they were all related to the use of a connection object. Coming from Classic ASP, I wrote my pages by creating a connection object at the top of the page, and using that connection throughout the page. The connection object was opened whenever something had to be done with the database and closed immediately after.

Connectionstring:
"Data Source=<server>;Initial Catalog=<catalog>;Integrated Security=false;user=<user>;password=<password>;Pooling=False;"
So pooling=false.

View 8 Replies

Forms Data Controls :: Get Text As A Member Of 'System.Data.SqlClient.SqlParameter'?

Oct 5, 2010

How do we get Text as a member of 'System.Data.SqlClient.SqlParameter'

See example of 'System.Data.SqlClient.SqlParameter', below:

[Code]....

Here is the snippet code to insert the Text as a member of 'System.Data.SqlClient.SqlParameter'

[Code]....

View 2 Replies

DataSource Controls :: Publish Database To Provider?

Jan 6, 2010

In my development environment, many times I will store the sql server (.mdf) files in the app_data folder of my web project instead of creating the database in sql server management studio express.

The problem is when I go to the server explorer and try to publish to provider and generate scripts for the database objects into a database project within my solution.

I get the error:

There are not objects in database: 'C:documents and settingsusernamemy documentsVisual Studio 2008projectssolution nameprojectsweb appproject nameapp_datadatabasename.mdf' of types scriptable by this wizard.

I read an article about the path name being too long. Is there a fix to this? I've setup my file structure for all my solutions and projects to be in one centralized location and don't really want to change the path structure. I'm hoping there is a fix or patch for this?

I'm using VS2008.

View 2 Replies

DataSource Controls :: Use SQLExpress As The Provider Database On Server?

Apr 22, 2010

I have a server that doesn't have MSSQL, can I use the default SQLExpress database somehow on the server to store my provider information? Or do I need to use a different databse with custom providers?

View 1 Replies

DataSource Controls :: The Provider Is Not Compatible With The Version Of Oracle Client?

Jan 21, 2011

I have a website in which code on the production server runs no problem. The same code on my local machine or test server produces the mess seen at the end. The exact same code. Additionally, upon trying to preview any of the table adapters in the dataset I get "DataSet1.thename could not be previewed. The provider is not compatible with the version of Oracle client"

The app is SQL Server. It always has been. It has never used Oracle. Does anyone have any insight on how to fix this? As it is now I can't do anything with my dataset. I can't edit anything in there because of this complaint about Oracle.

[Code]....

View 1 Replies

ADO.NET :: Use System.Data.SqlClient In VB.NET Code - Behind For Page?

Jul 23, 2010

I'm attempting to use the following line of code in my VB.NET code-behind for my page:

[Code]....

View 3 Replies

ADO.NET :: Getting An Error 'System.Data.SqlClient.SqlParamterCollection'?

Oct 8, 2010

I'm just a newbie developer using C# (ASP.Net) I'm having trouble in finding the solution in my error:

'System.Data.SqlClient.SqlParameterCollection' does not contain a definition for 'AddWithValue' accepting first argument of type 'System.Data.SqlClient.SqlParameterCollection' could be found (are you missing a directive or an assembly reference?)

I am using parameters before, but never experienced this kind of error.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved