DataSource Controls :: Onfigure SQL 8.00.2039 To Allow Remote Connections?
Feb 9, 2010
web service show me this errorFailureA network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) App_Code.d-vwopz6my sql version in 8.00.2039 how to configure SQL 8.00.2039 to allow remote connections
I've been playing about for ages in an attempt to get a simple bit of code that can detect whether or not SQL Server is listening remotely or just locally.. My pretty lame attempt so far is as follows:
[Code]....
I'm sure there must be a better way to do this! Aside from the fact that this code fails to work properly.
sp.IPAddresses contains:
- 127.0.0.1 - 0.0.0.0 - 10.0.0.10
When I used Surface Area Manager > Surface Area Configuration for Services and Connections and set Remote Connections to "Local connections only" sp.IPAddresses still contains the same addresses.
I am trying to make a small utility program to update a table in a database.
I made it as a asp.net 2008 project and connected to the development SQL server(which is located locally).It is working fine.
Then I try to move this to production, I realized that the sql server is located in another state and I can not connect it this way.( connection string from webconfig and open the connection).I can not change any configuration of the prod sqlserver.
I get error like sql server does not accept remote connection.( Verify that SQL Server is configured to allow remote connections).
I am trying to make a small utility program to update a table in a database.
I made it as a asp.net 2008 project and connected to the development SQL server(which is located locally).It is working fine.
Then I try to move this to production, I realized that the sql server is located in another state and I can not connect it this way.( connection string from webconfig and open the connection).I can not change any configuration of the prod sqlserver.
I get error like sql server does not accept remote connection.( Verify that SQL Server is configured to allow remote connections).
My lecturer insists that a web site should NOT have a static SQL connection as its not good practice (didn't explain why) but then I thought that if one makes instances of an SQL connection everytime I want to save, delete or edit then surely thats a bottleneck as I would need to everytime establish a connection and then do the save process. From what I have read online, the process of establishing a connection to the server is the longest (about 5 to 10ms)...
How would one manage their SQL connection. At the moment I do something like:
the SQL connection option ARITHABORT is OFF for OLEDB connections, which I assume Linq To SQL is using. owever I need it to be ON. The reason is that my DB contains some indexed views, and any insert/update/delete operations against tables that are part of an indexed view fail if the connection does not have ARITHABORT ON. Even selects against the indexed view itself fail if the WITH(NOEXPAND) hint is used (which you have to use in SQL Standard Edition to get the performance benefit of the indexed view).Is there somewhere in the data context I can specify I want this option ON? Or somewhere in code I can do it??I have managed a clumsy workaround, but I don't like it .... I have to create a stored procedure for every select/insert/update/delete operation, and in this proc first run SET ARITHABORT ON, then exec another proc which contains the actual select/insert/update/delete. In other words the first proc is just a wrapper for the second. It doesn't work to just put SET ARITHABORT ON above the select/insert/update/delete code.
We have developed web application using Asp.net, C# and SQL Server. However, When viewing the Process Info Tool for MS SQL Server, we see lots of processes (150-1000+) with Status = 'sleeping' and Command = 'AWAITING COMMAND' (Application = '.Net SqlClient Data Provider')The DataReaders and Connections are all being closed, but still the sleeping connections are accumulating. The problem becomes so severe that we finally get a "General Network Error" or a "Internal system error" and if we restart IIS. We have tested a lot but no success.
I think I have a problem that I never noticed before. I was just recently (as in tonight) shown the SQL Server Profiler. I noticed that on a video that I watched there profiler did not move unless there was a query to the database, thus making it easy to see what exactly was going on. When I opened mine for the first time and ran it I am getting 9 logs every say 5 seconds. They consist of;
Does anyone know if this is normal or my database just working way to hard?
I just restarted the server and checked databases for active connections now that I know nothing is running, and found the one database that is causing the problem... ReportServer has 4 connections after my restart. Should I leave this alone? Is it normal to have this reporting constantly going on?
I am new to using ADOMD for accessing SSAS cubes. I am having an issue with concurrency. I am using ADOMD to connect to SSAS 2005 in an ASP.Net 2008 application. When a user executes an MDX query and the ASP.net page opens an ADOMD connection, a second user that tries to execute an MDX query gets "a connection is already open" error. I don't understand how ADOMD works. Does it open only one connection for all users because ASP.Net is using a single account for all connections from the web server? I do not have this problem when using ADO.net in the same manner.
i have a web application that use a MySql DataBase. In a page, i have used the sqlDatasource control. The problem is that the conection with the database doesn't closed and i have a lot of open conections until show me the error that says me that the conection pool is full.
SQL Server Express 2005 MS Visual Studio 2005 Using ASP.NET with VB code behind. Requirements: Click a button on an ASPX page to disconnect temporarily all DB connections when not in use to allow a script to backup/copy the database to a safe backup location. When a user access the db afterwords, the DB connections will be re-established.
If this is imposible, recommend an alternative. Note: I am working with what I have been given and authorized to use.
Recently I bumped a problem with an asp.net application where seemingly random errors were thrown, although they were all related to the use of a connection object. Coming from Classic ASP, I wrote my pages by creating a connection object at the top of the page, and using that connection throughout the page. The connection object was opened whenever something had to be done with the database and closed immediately after.
Connectionstring: "Data Source=<server>;Initial Catalog=<catalog>;Integrated Security=false;user=<user>;password=<password>;Pooling=False;" So pooling=false.
I have a website I'm trying to catch up to speed on. It is throwing a null exception when the code tries to assign a variable pulled from a SqlDataSource query. The query is below:
[code]....
I want to know if there is a way to test the connection to the remote IP Address perhaps through some debugging tools and as a general question how would the web app authenticate against the remote database? I just see the connection string but no user name etc.
quick question on SQL Studio Mgt Expres (SSMES) 2208. I have been googling around but could not find a clear cut answer to this simple issue:Is it possible to connect to a remote db using SSMES 2008? The options at login appear to be restricted to Database Engine and SQL Server Compact Edition only. On the SSME 2005 version, there was an option to connect to remote db's usging server name & pwd. Has this feature been disabled in the 2008 Express version?
My asp.net 2.0 is deployed in web hosting.. now here in my server i have configure a static ip.. so how to access my ms sql database all over the world.. i need to know is that i need to write directly connection string in a webconfig of my static ip.. or i need to create a instance of my static ip to ms sql server 2005 to access the database..
In my windows application, i am listing the System DSN's configured on the remote machine in a combobox. Once i select the DSN and click on Connect button, i should be able to connect to the remote database. I am trying to open the connection to the database using ODBC but am getting the below error.
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
I am developing a website with ASP.NET pages that uses an SQL Server database with LINQ to SQL. I am using Visual Studio's Web Developer along with SQL Server 2008 (Developer Edition) database tables on my personal PC to develop this software. When ready, I intend to transfer the compiled web pages to a web hosting service with an SQL server database that is identical to the database on my PC.
I now have a version of my website deployed on a web hosting service at: [URL] and all of my database tables duplicated at the remote SQL server. However, this version of my website does not work with the database yet. I realize that I can have the VS Server Explorer connect to both databases, but I do not know if the web pages on my PC can use both databases interactively.
I am asking how I can develop my website to use the local SQL Server database and then have the deployed pages use the remote SQL Server database with LINQ to SQL. Do I need to create one version that works with the local database and another deployable version that works with the remote database? What should I do?
I want access remote server data base for my asp.net application my connectin string is
<add name ="Constr" connectionString="Server=xxx.xxx.xx.xxx,xxxSQLEXPRESS;Database=ABC;Integrated Security=True"/> and Error is
Login failed for user ''. The user is not associated with a trusted SQL Server connection. there is not any user id and password for access data base i already tried Uid=sa;password=sa
the following will clearly show the steps i have taken to achieve a connectivity to database "123" such that the remote user who is using sql login verification can do whatever he wants with the "123" database, and thee remote user cannot change anything of any other database.
?the permission u see granted in the pictures is just guest work, IT WORKS! but i would like to know the required correct permission to grant and not more permissions (to the point permission- DO ANYTHING WITH DATABASE "123" AND THATS IT- DONT EVEN SEE THE OTHER DATABASES)
?how shall i stop this remote user or deny this remote user from even viewing the other databases. a you can see the remote user cannot change anything in other databases but he can see them! I DOT WANT Him to VIEW THEM.
please give your comments and guidence "to achieve the above goals LIKE A PROFESSIONAL WOULD"
and a site link explaining these many permissions in sql server 2005 management studio express would be helpful.
My application running locally on my PC - on the Visual Studio Server (Cassini Server).My SQl Server DB is hsosted in a server on the internet.I think there are some configurations to be done in the SSMS ( Enable Remote conn.).
I have a SQL server in my office. I can connect from my home development workstation website to the remote SQL server with no problems but when I upload the site to the web host and try and use the same SQL server it fails with 'A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible'
I have created web pages using VS Web Developer that use a local Developer Edition of SQL server database on my PC with LINQ to SQL. When I deploy my website to a remote web host SQL server, I need for my web pages to be able to use the remote database instead of the local database. So, how do I get the Server Explorer to connect with a remote SQL Server database?
I need to insert a record in table which is in remote server....I am using two connection strings for local and remote....both the servers are in same workgroup only...so am able to connect the both.The problem is am filling data of local table in on dataset1 and remote server table data in another dataset dataset2..Now whil inserting a record local an error occured like "This row already belongs to another table" after googlingI found like this like "Dataset.importrow()" instead of "dataset.add()" method...then there is no errors but the inserted record is not inserting in remote server database...
I have simple asp.net web service, for monitoring and managing about 10 computers, with 4 webMethods and all of this methods are quite simple. In general they look sometning like: (1)make WMI connections to certain machine, (2)do some simple task, (3)return result.
Problem is that WMI connections to remote computers takes about 15s and I offten need to call 2 or 3 methods successively for the same machine.
From what I know, there is new instance of my service class (public class MonSvr :
System.Web.Services.WebService ) created every time webMethod is called.
So how can I share WMI or DB connection betwen all instances of my service that I could reuse this connection ? When there all multiple calls to webMethods of my service, does then each instance of web service runs in separate thread ?
