DataSource Controls :: Verify That SQL Server Is Configured To Allow Remote Connections?
Dec 8, 2010
I am trying to make a small utility program to update a table in a database.
I made it as a asp.net 2008 project and connected to the development SQL server(which is located locally).It is working fine.
Then I try to move this to production, I realized that the sql server is located in another state and I can not connect it this way.( connection string from webconfig and open the connection).I can not change any configuration of the prod sqlserver.
I get error like sql server does not accept remote connection.( Verify that SQL Server is configured to allow remote connections).
View 2 Replies
Similar Messages:
Jun 11, 2010
I am trying to make a small utility program to update a table in a database.
I made it as a asp.net 2008 project and connected to the development SQL server(which is located locally).It is working fine.
Then I try to move this to production, I realized that the sql server is located in another state and I can not connect it this way.( connection string from webconfig and open the connection).I can not change any configuration of the prod sqlserver.
I get error like sql server does not accept remote connection.( Verify that SQL Server is configured to allow remote connections).
View 2 Replies
Apr 19, 2010
I've been playing about for ages in an attempt to get a simple bit of code that can detect whether or not SQL Server is listening remotely or just locally.. My pretty lame attempt so far is as follows:
[Code]....
I'm sure there must be a better way to do this! Aside from the fact that this code fails to work properly.
sp.IPAddresses contains:
- 127.0.0.1
- 0.0.0.0
- 10.0.0.10
When I used Surface Area Manager > Surface Area Configuration for Services and Connections and set Remote Connections to "Local connections only" sp.IPAddresses still contains the same addresses.
View 1 Replies
Feb 9, 2010
web service show me this errorFailureA network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) App_Code.d-vwopz6my sql version in 8.00.2039 how to configure SQL 8.00.2039 to allow remote connections
View 2 Replies
Jan 22, 2010
I think I have a problem that I never noticed before. I was just recently (as in tonight) shown the SQL Server Profiler. I noticed that on a video that I watched there profiler did not move unless there was a query to the database, thus making it easy to see what exactly was going on. When I opened mine for the first time and ran it I am getting 9 logs every say 5 seconds. They consist of;
Audit Logout
RPC:Completed
Audit Login
RPC:Completed
RPC:Completed
SQL: BatchStarting
SQL: BatchCompleted
SQL: BatchStarting
SQL: BatchCompleted
Does anyone know if this is normal or my database just working way to hard?
I just restarted the server and checked databases for active connections now that I know nothing is running, and found the one database that is causing the problem... ReportServer has 4 connections after my restart. Should I leave this alone? Is it normal to have this reporting constantly going on?
View 1 Replies
Apr 15, 2010
How to insert data from local SQL server to remote SQL server (without using linked server) like below?
insert * into [remote server].[northwind].orders
from [local server].[northwind].orders
View 4 Replies
Mar 13, 2010
I have created web pages using VS Web Developer that use a local Developer Edition of SQL server database on my PC with LINQ to SQL. When I deploy my website to a remote web host SQL server, I need for my web pages to be able to use the remote database instead of the local database. So, how do I get the Server Explorer to connect with a remote SQL Server database?
View 6 Replies
May 20, 2010
I need to insert a record in table which is in remote server....I am using two connection strings for local and remote....both the servers are in same workgroup only...so am able to connect the both.The problem is am filling data of local table in on dataset1 and remote server table data in another dataset dataset2..Now whil inserting a record local an error occured like "This row already belongs to another table" after googlingI found like this like "Dataset.importrow()" instead of "dataset.add()" method...then there is no errors but the inserted record is not inserting in remote server database...
View 5 Replies
Jun 22, 2010
My asp.net 2.0 is deployed in web hosting.. now here in my server i have configure a static ip.. so how to access my ms sql database all over the world.. i need to know is that i need to write directly connection string in a webconfig of my static ip.. or i need to create a instance of my static ip to ms sql server 2005 to access the database..
View 7 Replies
Apr 5, 2010
I want access remote server data base for my asp.net application my connectin string is
<add
name ="Constr"
connectionString="Server=xxx.xxx.xx.xxx,xxxSQLEXPRESS;Database=ABC;Integrated
Security=True"/>
and Error is
Login failed for user ''. The user is not associated with a trusted SQL Server connection. there is not any user id and password for access data base i already tried Uid=sa;password=sa
View 3 Replies
Feb 16, 2010
I have a SQL server in my office. I can connect from my home development workstation website to the remote SQL server with no problems but when I upload the site to the web host and try and use the same SQL server it fails with 'A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible'
View 4 Replies
Mar 18, 2010
I just want to make sure I used SCOPE_IDENTITY() correctly to get the newly made TestimonialID
[Code]....
Is this the proper way to use it?
View 4 Replies
Jun 18, 2010
My lecturer insists that a web site should NOT have a static SQL connection as its not good practice (didn't explain why) but then I thought that if one makes instances of an SQL connection everytime I want to save, delete or edit then surely thats a bottleneck as I would need to everytime establish a connection and then do the save process. From what I have read online, the process of establishing a connection to the server is the longest (about 5 to 10ms)...
How would one manage their SQL connection. At the moment I do something like:
[Code]....
View 1 Replies
Jun 4, 2010
the SQL connection option ARITHABORT is OFF for OLEDB connections, which I assume Linq To SQL is using. owever I need it to be ON. The reason is that my DB contains some indexed views, and any insert/update/delete operations against tables that are part of an indexed view fail if the connection does not have ARITHABORT ON. Even selects against the indexed view itself fail if the WITH(NOEXPAND) hint is used (which you have to use in SQL Standard Edition to get the performance benefit of the indexed view).Is there somewhere in the data context I can specify I want this option ON? Or somewhere in code I can do it??I have managed a clumsy workaround, but I don't like it .... I have to create a stored procedure for every select/insert/update/delete operation, and in this proc first run SET ARITHABORT ON, then exec another proc which contains the actual select/insert/update/delete. In other words the first proc is just a wrapper for the second. It doesn't work to just put SET ARITHABORT ON above the select/insert/update/delete code.
View 4 Replies
Jan 19, 2010
We have developed web application using Asp.net, C# and SQL Server. However, When viewing the Process Info Tool for MS SQL Server, we see lots of processes (150-1000+) with Status = 'sleeping' and Command = 'AWAITING COMMAND' (Application = '.Net SqlClient Data Provider')The DataReaders and Connections are all being closed, but still the sleeping connections are accumulating. The problem becomes so severe that we finally get a "General Network Error" or a "Internal system error" and if we restart IIS. We have tested a lot but no success.
View 5 Replies
Mar 19, 2010
I am new to using ADOMD for accessing SSAS cubes. I am having an issue with concurrency. I am using ADOMD to connect to SSAS 2005 in an ASP.Net 2008 application. When a user executes an MDX query and the ASP.net page opens an ADOMD connection, a second user that tries to execute an MDX query gets "a connection is already open" error. I don't understand how ADOMD works. Does it open only one connection for all users because ASP.Net is using a single account for all connections from the web server? I do not have this problem when using ADO.net in the same manner.
View 2 Replies
Jul 28, 2010
i have a web application that use a MySql DataBase. In a page, i have used the sqlDatasource control. The problem is that the conection with the database doesn't closed and i have a lot of open conections until show me the error that says me that the conection pool is full.
[code]....
View 9 Replies
Mar 30, 2010
SQL Server Express 2005 MS Visual Studio 2005 Using ASP.NET with VB code behind. Requirements: Click a button on an ASPX page to disconnect temporarily all DB connections when not in use to allow a script to backup/copy the database to a safe backup location. When a user access the db afterwords, the DB connections will be re-established.
If this is imposible, recommend an alternative. Note: I am working with what I have been given and authorized to use.
View 3 Replies
Sep 30, 2010
I am having issues debugging locally within Visual Studio 2010 on Server 2008 R2 (x64) for a new ASP.Net MVC application. I am able to debug using the VS Development Server (Cassini) but when I change to use the Local IIS Web Server and Create Virtual Directory, I am unable to debug. I get the standard VS message:
"Unable to start debugging on the web server. The web server is not configured correctly. ..."
Everything looks standard in IIS. The Default Web Site is running under the ASP.NET v4.0 application pool. The virtual directory that Visual Studio created is running under the same app pool. I am running Visual Studio as the Administrator account. It feels like some security setting or something is preventing this to work but I'm at a loss to what it could be.
View 1 Replies
Mar 23, 2010
I have one application in that there are two server
1. Application Server
2. Database Server.
I have install MSSqlserver 2008 on DB server , but i dont want to give report server URL as business dont want to expose IP of DB server. Hence i install Reporting services component on Web server. I configure Successfully to Database reportserver Database.
but when i clicked on report services URL it gives error: The report server installation is not initialized. (rsReportServerNotActivated) what extra needs to configure report server?? what are the steps to configure report server ?
View 3 Replies
Jan 27, 2010
Recently I bumped a problem with an asp.net application where seemingly random errors were thrown, although they were all related to the use of a connection object. Coming from Classic ASP, I wrote my pages by creating a connection object at the top of the page, and using that connection throughout the page. The connection object was opened whenever something had to be done with the database and closed immediately after.
Connectionstring:
"Data Source=<server>;Initial Catalog=<catalog>;Integrated Security=false;user=<user>;password=<password>;Pooling=False;"
So pooling=false.
View 8 Replies
Mar 16, 2010
I get this error on line 39 -"Server does not support secure connections.".
[Code]....
View 5 Replies
Aug 12, 2010
I have a problem with the connection of external files - northwind.MDF Connection to SQL Server is fine.
But to connect to external files wrong. Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Intance Specified)
View 6 Replies
Dec 14, 2010
I have a website I'm trying to catch up to speed on. It is throwing a null exception when the code tries to assign a variable pulled from a SqlDataSource query. The query is below:
[code]....
I want to know if there is a way to test the connection to the remote IP Address perhaps through some debugging tools and as a general question how would the web app authenticate against the remote database? I just see the connection string but no user name etc.
View 5 Replies
Apr 28, 2010
quick question on SQL Studio Mgt Expres (SSMES) 2208. I have been googling around but could not find a clear cut answer to this simple issue:Is it possible to connect to a remote db using SSMES 2008? The options at login appear to be restricted to Database Engine and SQL Server Compact Edition only. On the SSME 2005 version, there was an option to connect to remote db's usging server name & pwd. Has this feature been disabled in the 2008 Express version?
View 2 Replies
