I have this code, and I need the "it.MembershipOption.Id" value in the "where" clause to be the <%# Eval("Id") %> from ListViewEventsOuter. I tried to add the Eval in the "where" clause but it throws an error.
How is this done?
[code]...
I'v been using SqlDataSource and ObjectDataSource for a while.I would like to know about LinqDataSource and EntityDataSource. Therefore I have 2 questions to ask.1) Why do we need to use those twos? 2) In which cirmustances (Requirements) developers are using LinqDataSource and EntityDataSource?
View 1 RepliesT-SQL
[Code]....
And i want to convert to eSQL for EntityDatasource
[Code]....
But it is error.
What would be the best way to extend the EntityDataSource control? I have a site that implements Entity Framework and I current create my model container and add it to the HTTPCurrent context. When I create EntityDataSource controls on the page I have to go into the code behind and set the OnContextCreating to add MY context to the EntityDataSource instead of the one that EntityDataSource creates. This is because in my model I have extended the Partial Classes to support Validation and custom Save/Delete methods.I would ideally like to create a custom control that I can drop onto a page that has its context already set to the context that I created.
View 1 RepliesI have a GridView that's currently bound to an ObjectDataSource. I would like to see if it's possible to instead bind it to an EntityDataSource. However, I need to be able to apply custom filters to it.
One of the filters corresponds to a bit / boolean property in the database / EntityDataModel. It has 3 possible selections:
[Code]....
[code]....
How can I accomplish the same thing in an eSQL Where clause? There is no COALESCE function, is there an equivalent?
I have a formview with an entityDataSource. I need to include columns from related fields. I have seen many demos, with AdventureWorksDB, that imply that you can do this by using INCLUDE in the entitydatasource declaration. I have tried made many attempts and it just does not seem to work as demonstrated. I have attached the errors below and the EDS. I have also attached a JPEG of the model I am working in. Three errors demonstrating 3 different attempts to include a related table:
DataBinding: 'TmModel.tbICObjectBase' does not contain a property with the name 'Group'
the code declaration for error 1:
<asp:Label ID="Label1" runat="server" Text='<%# Bind("Group") %>' />
DataBinding: 'TmModel.tbICObjectBase' does not contain a property with the name 'tbICTagBase'.
the code declaration for error 2:
<asp:Label ID="Label1" runat="server" Text='<%# Bind("tbICTagBase.Group") %>' />
DataBinding: 'System.Data.Objects.DataClasses.EntityCollection`1[[TmModel.tbICTagBase, TmModel, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null]]' does not contain a property with the name 'Group'.
the code declaration for error 3:
<asp:Label ID="tbICTagBasesLabel" runat="server" Text='<%# Bind("tbICTagBases.Group") %>' />
EntityDataSource
<asp:EntityDataSource ID="entDSObjectBase" runat="server" AutoGenerateWhereClause="True"
ConnectionString="name=IntouchDBContainer" Include="tbICTagBases"
DefaultContainerName="IntouchDBContainer" EnableFlattening="False"
EntitySetName="tbICObjectBases" EnableDelete="True" EnableInsert="True"
EnableUpdate="True" EntityTypeFilter="tbICObjectBase">
<WhereParameters>
<asp:SessionParameter SessionField="Tag" Name="RecID" Type="Int64" />
</WhereParameters>
</asp:EntityDataSource>
You can see the model at [URL] Or [URL]
I'm playing with an EntityDataSource and specifying a simple order by clause containing one column name, for instance "it.[DNS_NAME]".
When I run the following:
[Code]....
I get an EntitySqlException saying that @sort's type is incorrect. It is expecting a Transient.rowtype that matches one of the columns. What is going on here? Order by parameters don't really have a meaningful type other than a string in my opinion. When I try specifying DbType.String instead of TypeCode.String, the same error is thrown.
The exception:
'@sort' is not a member of type 'Transient.rowtype[(SOFTWARE_DSPL_ID,Edm.Int32(Nullable=True,DefaultValue=)),(COMPUTER_NAME,Edm.String(Nullable=True,DefaultValue=,MaxLength=64,Unicode=True,FixedLength=False)),(DNS_NAME,Edm.String(Nullable=True,DefaultValue=,MaxLength=64,Unicode=True,FixedLength=False)),(DIRECTORATE_NAME,Edm.String(Nullable=True,DefaultValue=,MaxLength=24,Unicode=True,FixedLength=False)),(OS_BROAD_CAT_NAM,Edm.String(Nullable=True,DefaultValue=,MaxLength=25,Unicode=True,FixedLength=False)),(OS,Edm.String(Nullable=True,DefaultValue=,MaxLength=64,Unicode=True,FixedLength=False)),(EQP_TYPE,Edm.String(Nullable=True,DefaultValue=,MaxLength=64,Unicode=True,FixedLength=False)),(EQP_PROP_NO,Edm.String(Nullable=True,DefaultValue=,MaxLength=10,Unicode=True,FixedLength=False))]'
in the currently loaded schemas.
How can I dynamically provide the column name to order by?
For a Table A defined in the DB like this:
A :{ id, selfId, name,} where selfId is a foreign key refered to Table A itself.
I generated the Entity automatically like this:
A :{ string id; A self; string name,} when i update the entity in gridview Edit/Update CommandField
i got the exception:
Object reference not set to an instance of an object. Description: An unhandled exception occurred during the execution of the current web request. review the stack trace for more information about the error and where it originated in the code. Exception Details: System.NullReferenceException: Object reference not set to an instance of an object. Source Error:
[Code]....
Stack Trace:
[Code]....
I guess maybe this is caused by:
A is to be updated, and when the EntityDataSource construct the new A, the reference "self" is invalid at that moment. I do not want to modify my DB structure and do not want to lose the self reference, The event EntityDataSource_Updating is not triggered while the exception hit. so i can not access my entity at any time. Maybe the worst idea is deal the whole Update Procedure myself. However, is there any better workaround?
I am trying to populate the ListView using LinqDataSource data source but the issue I am having is.I need to load the listview on Search button click action.
IN the page_load I kept like this:
===========================================
LinqDS.Selecting += new EventHandler<LinqDataSourceSelectEventArgs>(LinqDS_Selecting);
protected void LinqDS_Selecting(object sender, LinqDataSourceSelectEventArgs e)
{
e.Result = ObjectDS;
}
=============================================
This works fine but this happens on page load,i want this binding to happen on button click?is there a way to do this?
I have a DataList control that I use to display a list of words.
[Code]....
When a user click on any of these words, I want to display the details of this word's in my ListView control that is on the right side of the DatatList control. The ListView control is setup to use a SQLDataSource control. I want to use the SqlDataSource1_Selecting method to grabe the ID from the DataList control but I'm not sure how I grabe the ID or how to setup the DataList to send the ID over.
I have a master-detail page consisting of a databound GridView and ListView. It's pretty standard - when you select a row in the GridView is shows up the ListView. The problem I'm running into is when I want to link to that page with a specific row pre-selected in both views. It seems like it should be easy enough, but I just can't figure it out. Currently, the ListView is connected to the GridView with a ControlParameter in the SelectCommand.
View 4 RepliesI have tried almost evrything and nothing seems to work,,, I dont see errors but the code is not firing when I bind in the properties of the button control ,,nor the code behind.
aspx
[code]....
I am trying to pass the value of a dropdownlist to the Update section of a listview. The dropdownlist is bound to one datasource which needs to then pass its selected value to the UpdateCommand sql for another datasource. Here is my code:
[code]....
i am trying to develop forum page in asp.net using c#. I have listed forum threads lists as Title, Description, Posted On, Posted By like that using Listview. Now my idea is if the user clicks anyone of the title from the list the control will move to new page. there based on thread title selected from listview i would like to display the reply msgs posted for that. i am struggling lot here.
View 2 RepliesI have been stuck on how to pass multiple to a JavaScript function in a item template of a list view. Below is my code. Does anyone know the process?
[Code]....
How do I do this? I want to search my database in listview form with the text from a textbox or an item from a drop down list which is on another page.
View 1 RepliesI need to pass the control parameter to Sql Datasource in code behind,
<asp:ControlParameter ControlID="DDL_RType" Name="rtype" PropertyName="SelectedValue"
I have triple-nested ListView controls on my asp.net page, each nested within another. I use the OnItemDataBound event in the 1st ListView to set the DataSource of the 2nd level ListView. The 3rd ListView is contained in the of the 2nd ListView. I want to assign the same DataSource to both the 2nd and 3rd level ListView datasource controls, but I cannot figure out how to access the 3rd level ListView in order to do that.
[Code]....
The level1_ItemDataBound method finds the level2 control, casts it as a ListView, sets its DataSource and executes the DataBind. At this point I'm stuck trying to get Level3.DataSource to be set to the same as Level2.DataSource.
I have a ListView displaying data from Table A using a SqlDataSource.
I want to take the displayed data (and these are just the standard columns representing fields in Table A) and store them in Table B using a Stored Procedure
(The scenario is much more complex but I've left out anything not relating to this exact problem).
I've added a Button to the ListViews ItemTemplate and I'm using OnItemCommand to create a Sub for its "Click" in the Code Behind.
This is a simplified chunk of the SQL I'm using to insert the ListView's fields into Table B using the Stored Procedure "InsertCart":
[Code]....
Where I've highlighted "Description" in the last line. In a GridView, this would be enough. Description is a Column name in Table A and B and iy's an Item in the ListView. But I'm realising that, with ListView's, the data binding is not as "automatic" as a GridView. Just using the columnname is not enough.
What do I use instead of the word Description to reference this column in the Parameter?
[Code]....
and my Index
[Code]....
Issues with the below code. I feel something wrong here. Advisable to use or recode? below is my connection pooling class.
[Code]....
i create new connection and close the it by passing its reference as below in finally block.
[Code]....
i am using a list view for viewing some information to user there i used a hyperlink in each row to show detailed information in a modal popup in the same page what i want on the click of particular hyperlink the detailed report of that row only should display.
[ID] is the primary key in my database iam passing that as an object from aspx file to the code behind and using that id to fetch data from database. but each time it is showing same information.
I am trying to pass a variable within a selectcommand statment in ASP.NET and I have researched online how to do it but I can't seem to find a way to do it...What I am trying to do is write a code for a web page that will display a page with useful links on it where the links are separated into different topics and where everything is dynamically grabbed from a database. This is what I have so far:
<!-- Start MainContentRegion -->
<h1>Useful Links</h1>
<asp:SqlDataSource ID="SqlDataSource1" runat="server"
[]code...
I followd Brian Orrell LINQ tutorial for paging/sorting and created a gridview bound to an ObjectDataSource through a method call which gets data from adatabase. My form includes two buttons with a textbox next to each one of them. I need to be able to populatte th egridview depending on the button that was pressed, I cannot figure out how signal my method which button was pressed.
[Code]....
[URL]
I'm experimenting with an example of code that I found in a book. Here is the HTML:
[Code]....
This looks fine in DesignView.
Here is the VB:
[Code]....
The page loads when I hit F5. I enter initials for a state and click the button and get this error message: 'The connectionstring property has not been initialized'. This line is green:
objConnection.Open()
I'm highly confident that the connection srting is correct. Do I need to Dim another variable or something?