Databases :: Using Tableadapater Configure Wizard For Update
Mar 20, 2011
visual studio: 2010
Database: oracle 11g r2
i'm using visual studio data set designer to create a typed dataset and I want the dataset to use Oracle stored procedures to query, update, and delete to the database. Query a view, update to a table, and delete a row from a table. This typed dataset will be the datasource for a gridview. In the grid view I want to display some information from the database and be able to update and delete. I was able to display what I wanted to the gridview using the typed dataset which used a Oracle stored procedure.
However, now I want to run a Oracle stored procedure to do an update but I'm not sure how to pass the required parameters to my stored procedure. error i got trying to configure the datasets tableadapter to use my oracle stored procedure as the update, not sure if this is the problem i'm having screen shot of the objectdatasource that brings together dataset and gridview
stored procedure for updating
PROCEDURE "update_config_magic"
(times_to_repeat_in IN NUMBER,
account_num_in IN NUMBER,
spell_num_in IN NUMBER
)
IS
PRAGMA AUTONOMOUS_TRANSACTION;
BEGIN
UPDATE user_train_config_magic
SET timestorepeat = times_to_repeat_in
WHERE user_train_config_magic.account_num = account_num_in AND
user_train_config_magic.SPELL_NUM = spell_num_in;
COMMIT;
END "update_config_magic";
View 4 Replies
Similar Messages:
Jul 14, 2010
I am trying to use wizard in an update panel but the wizard is disappearing when I click for the next or prev step button. I only want to close wizard , when I click the finish button. How can I do this ?
View 1 Replies
Jul 28, 2010
I have a new account with no-ip.com with Dynamic DNS Update Clients installed in my pc. my url is [URL] when ever i enter this ip in browser it shows me my modem dsl router setup page.. i need to show my webpage which is in IIS. For local it would be like this: [URL] i need to show this webpage [URL] (all over the world if user enter)-> [URL] So how to Achieve this.
View 1 Replies
May 18, 2010
When i open the The Configure Data Source wizard, the "Specify columns from a table or view" shows gray, I cannot choose it. How can I do it.
View 4 Replies
Sep 6, 2010
i would like to retrieve a value with select and perform a calculation and then save using update in the same batch code?
View 3 Replies
Jun 26, 2010
I have a gridview with all columns read only except one. I want to configure the update method for the object data source to update only one column. The code i have written works when i make all columns editable but fails when i try to make only one column editable.
View 1 Replies
Aug 24, 2010
I have a three step Wizard with various textboxes in it. I out the Wizard inside an Update Panel and Content Template. I launch the site and the first step of the wizard is executed nicely but when I click next to get to the second step, nothing happen. If I take the wizard out of the update panel then it works fine.
View 1 Replies
Jul 17, 2010
In my Entity Framework v4 project, I have a table with two columns that are computed by the database (via triggers, etc.). In order to get EF to properly insert records into the table, I have to manually mark the columns as "Computed" in the EF Storage Model (the StoreGeneratedPattern attribute), which is not supported by the designer -- so I have to make the edits by hand to the XML in the .EDMX file. The problem is that whenever my database schema changes, and I need to update the storage model in my project, the "Update Model Wizard" overwrites the whole Storage Model section of the .EDMX, eliminating my manual changes. This means that I have to keep a special list of such changes and manually re-apply them everytime I do an update!
Is there any way to prevent the Storage Model overwrites? Is there a way to flag the columns in the database, so that EF will automatically mark them as computed? As a last resort, is the some REALLY EASY XML tool/technique that can automatically apply the changes for me after every refresh? I've been told by an insider that one solution might be to check out the "Designer Power Pack" (link below), which allows you to customize generation of the storage model. I've only skimmed the info so far, but it looks to me like there may be a day or two learning curve to figure that out. Does anyone have any experience with the Designer Power Pack, or any other ideas? [URL]
View 4 Replies
Mar 3, 2011
I have a user control.
On that user control is an update panel.
In that update panel is a wizard.
One of the steps is as follows.
[Code]....
What this does is create a javascript spinner control. Now when I click the NEXT button onto this step it generates the spinner control. I click next to go to the next step, then I click PREVIOUS to go back to this step and the spinner control is not generated.
Now I have tested this on an ASPX page and it seems to work, I then copy the code across to an ASCX control and put the page live and it does not work.
The update panel has an animation extender that just displays a div with a processing gif when you click next/previous.
So any reason why it creates the control on the next and not the previous step?
View 1 Replies
Feb 3, 2010
have a wizard control inside an update panel. have a radiobuttonlist that autopostback's when i click a radio button, page posts back & the page hops back up to the top. i want a user to be able to click radio controls & checkboxes with the form to be fluent; the hop back up to the top is rather annoying & may confuse the user.
View 1 Replies
Jan 21, 2011
I use gridview and sqldatasource wizard for update value. If i need update some value example close_date (datetime value) only. What should i do?
[Code]....
View 2 Replies
Mar 25, 2010
I am using asp.net 2.0 (Visual studio 2005)
I have a update panel and Update progress inside an Wizard control's Wizard Step.
But the update progress is not shown when i click on the 'Finish' (in which the ajax controls are placed) button inside the Wizard step
Note : I am using the FinishNavigationTemplate to define the 'Finish button and OnClick Event of the Button, i am setting the Updateprogress control location using DomElement
Sys.UI.DomElement.setLocation(updateProgressDiv, 300, 300);
View 2 Replies
May 4, 2010
in generate the Stored Procedures when using Create TableAdapter configuration Wizard in VS.it can not generate the Stored Procedures for Delete and Update Commands, but it generated for Select and Insert. i tried many times, but still get the same problem.
View 2 Replies
Jan 15, 2010
[code]...
This query works perfectly on the query analyser.
But when configuring the Table adapter ,I try executing the query and i get 0 rows affected.
What could I be getting wrong in this case.
NB:Existing GalleryID has been supplied.
View 1 Replies
Feb 7, 2011
I have to update multiple row and two column of each row.
I have try to Update with case statement but after I perform that statement it blank out every other column that doesn't fall into the criteria of the update statement.
My table structure is like this;
table1
col1
row1 11
row2 22
I want to update row1 and row2 of their col1 in one single sql , how do i do that?
View 4 Replies
Feb 23, 2011
I'm using the 'Configure Data Source' wizard to connect to my database and show the dataset in Gridview. I want to be able to update, insert and delete entries but am unsure how to build the query. I can write simple update statments to change database entries but how can I do this for entries that have been changed within the gridview?
View 6 Replies
Apr 1, 2011
I want to update multiple column of a table using subquery ...My sample code is shown below
[Code]....
its throwing syntax error...I dont know where i commiting mistake.
View 1 Replies
Mar 18, 2011
Not sure how to best accomplish this task. I do have several reports to make in Excel every day. The reports do have a shhet for every week and one column for each day in week. What is the best way to get the excel auto update and get data from the SQL table? As for now I run a query on a webpage and coying the data in to the excel sheet manually. Should I try making a database connection within the excel sheet? Should I try having a ADO connection working in .NET? I really donīt know where to begin.
View 2 Replies
Feb 2, 2011
i am having a transaction related problem regarding mysql.. need some advice how to proceed !!!
here is a gridview for my application and i am inserting or updating for each row.... like
[Code]....
well now what i want is if any of the row update or insert failes ... it should revert all the changes that was already made into the database ... even a single row update .. into that perticular table ... the code which i have called for payment.Update(PayDetails, 0) is :
[Code]....
can someone help me out how to proceed in this scenario ??? how do i undo each of the updates made into the table payment schedule details ...
View 1 Replies
Feb 14, 2011
Although the below connection string works for Select, Insert and Delete functions I can't get to work with Update.
Returns error 'unable to connect to MySQL hosts'
Sub Edit (sender As Object, e As EventArgs)
Dim myConnection As MySqlConnection[code]...
I have fried a multitude of combinations, also from MySQL site without success.
View 2 Replies
Feb 25, 2010
i have a problem with date after register i need to update im not edit the date value still i found an error Incorrect date value: '2010-02-09 12:00:00 AM'
im using data type(mysql)---->date
View 2 Replies
May 4, 2010
Im hosting my site over at some ISP, and when i try to use INSERT or UPDATE procedure, i get this error : "SELECT command denied to user 'KidumMac'@'localhost' for table 'proc' "Which is really wired for two reasons:
A. In my code i don't reference whatsoever to the MySql databse, nor the "proc" table
B. In the myPHPadmin program the queries work just fine. Any insights?
the second problem is that when i try to import my database, the tables import fine, but when it gets to import the stored procedure, it tells me that the user needs SUPER PRIVILEGES for that. what is it ?
View 2 Replies
Jan 29, 2011
i have made a connection and retrieve the data from the excel sheet. however when i run a query to update or insert some data into excel sheet it will generate an error "Cannot expand named range"
View 2 Replies
May 11, 2010
Before I get too far down the road I just want some advice. I'm building a web app using VWD2008 and MySQL 5. I've got the membership provider stuff working fine and have an odbc connection setup which works "fine". what I've noticed is that when I configure a new sqldatasource (that will be used to provide data to a listview or something) the Advanced -> generate Insert,Update..... option is disabled. I'm assuming its because of the sql syntax difference of the square brackets issue between MS SQL Server and MySQL.
Before I start writing all my own insert and update statements does anyone know if there is a way to get MySQL and VWD to talk the same language, maybe a different connector or something. I'm using mysql-connector-odbc-3.51.15
View 7 Replies
Sep 2, 2010
I've downloaded OracleHelper.cs & i'm using it for SELECT Statements so far &
Now i'm suppose to INSERT & UPDATE with it....
Will someone give an example for how to insert & update using oracle helper for TEXT & STORED PROCEDURE !
List<OracleParameter> OrclParam = new List<OracleParameter>();
OrclParam.Add(new OracleParameter("@eid",OracleDbType.Int32).Value) = a_type;
OrclParam.Add(new OracleParameter("@ename",OracleDbType.Varchar2).Value) = a_name;
OracleHelper.ExecuteDataset(connectionString, CommandType.Text,
"Insert into Employees (EID,ENAME) values(@eid,@ename)");
The above codes does'nt work
View 1 Replies