I want to add mime type in web.config to make downloading files for users.but after adding mime tag, website starts showing internal error 500 and removing this, it runs fine but when user click on files to download then it show error that file not found. So I need to add proper mimetype for my uploaded files. So pls tell me the proper way to add it to web.config file.
View 3 RepliesI added a could of new MIME types to IIS7 per the instructions. I also modified an existing one.
On my browser, I still see the 'old' MIME type of the modified one.
Tried iisreset, app pool recycling, etc.
COuld there be some .config file somewhere affecting this?
My host moved my website to a new server. The DNS configuration is correct but the website is still down and I'm getting this message
"unable to open website at www.aboutmecfs.org. Internal Server error"
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add to web config I get following error:
Server Error 500 - Internal server error. There is a problem with the resource you are looking for, and it cannot be displayed. What I need to do now?
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
I first time tying deploy ASP.NET MVC3 Web App and after upload files and made database I had problems with diplaying sites...I was redirected to "page not found'. After add <customErrors mode="Off"/> to web config I get following error:
Server Error
I have a web site that has always run fine for years and years under 3.5. I converted it recently to run under 4.0, and it runs on Cassini fine. When I attempt to deploy the app to an IIS7 server that has 4.0 installed, all I get is "internal server error", and no error messages in the Event log, and nothing in the http logs.
I've double checked that the application pool I've deployed to is running 4.0.
It's an x64 web server and app (always has been while it was under 3.5.
I need to get the mime types in an IIS7 environment. They should be in:
<configuration>
<system.webServer>
<staticContent>
<mimeMap...
As I understand it, in IIS7 if I can get to it I should see both custom additions in my web.config as well as the mime types defined in the IIS manager at the machine level.
I don't understand how to get to this data. I have messed with the configurationmanager but I am not getting anywhere. I can get a section names system.webServer but I don't see any of the actual data as colleciton of properties or as xml.
I have recently developed a new vs2010 web application that I would like to add to my web site.
The existing website was developed using vs2008. The web site is hosted on a windows 2008 server running iis 7. My new web application sits below my main website i.e. mywebite mywebsite/mynewwebsite
I have set the application pools for the mynewwebsite to be asp.net v4.0, leaving the application pools for mywebsite as .net v2.0 If I try and open my new web application i.e. [URL] then I get 500. Internal server error. I assume that it is iis that is unhappy here. Do I have to rebuild the whole of my web site to be vs2010 using asp.net v4.0. If I do should I use ASP.Net v4.0 or ASP.net v4.0 Classic for my application pools, and should I have a separate and distinct application pool for each of my web applications ( I have 4 of these) Just to clarify my clients can log on the web site as
[Code]....
When I run my app locally I get no errors. No error from Global.asax, no redirection to an error page. Everythings works fine.
When I deploy my app to a test server, my app run there with no errors. No error from Global.asax, no redirection to an error page. Everythings works fine on the test server.
But when I deploy my app to production server, the app runs fine but I keep getting errors (emailed to me) from Global.asax. On production server we have these security apps that run and keep hitting all URLs of the app on the server. Just to make sure they are working fine. When these security app hit URL of my app, my application runs fine but it gives out this global.asax error. The funny thing is that error is empty. The error are emailed to me and the email is empty. Nothing there.
There are several other apps running on the same server. My app has its own app pool and is configured correctly.
Whenever there is a configuration error inside the web.config, the server sends a yellow screen of death to the browser with a few lines around it. My problem is I am using impersonation and I don't want the users to see the impersonating username/password. So how can I prevent the server from showing the web.config code??
View 1 RepliesI have an ASP.Net website and I want to use a custom error page. I put the following code in my web.config
<customErrors mode="On" defaultRedirect="~/error.aspx">
<error statusCode="404" redirect="~/error.aspx" />
</customErrors>
The problem is when i go to a URL that does not exist is still uses the 404 error page specified in IIS Manager.Question: How can I make it use the error.aspx page I have created? Why do the settings in IIS Manager override the web.config?
I got this error in a project I did a while back. I think this was a web site project that i converted to a web app project. This was a while ago. This is an app I'm trying to run on my local machine. I'm not using IIS.
Does anyone know what this means?
Error 2
It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS.
C:UsersKristDocumentsVisual Studio 2008ProjectsWeb AppsKrist Woodard .net tabbedWebApplication1WebApplication1Web.config 46
I have got a problem tesing paypal sandbox IPN. i have got this error message: IPN delivery failed. HTTP error code 500: Internal Server Error
I could not find out what this error means.
I have just installed IIS manager version 6.1 build 7600 and visual studio 2010 (latest additions of both).
I have followed all the instructions and given the correct permisions ect for IIS to work with my directory. I have a helloworld website that has worked via the localhost server many times, but almost hourly something happens to the settings in IIS and it starts throwing errors.
The current error copied below. Basically I am wondering a few things...
1. Why does my IIS constantly do something so that it works one minute and then it wont the next (this is with an identical helloworld.htm file so I know it is not something I am doing with the file that is messing it up).
HTTP Error 500.0 - Internal Server Error
Calling LoadLibraryEx on ISAPI filter "C:WindowsMicrosoft.NETFrameworkv4.0.30128aspnet_filter.dll" failed
Module
IIS Web Core [code]......
I am currently trying to setup our website on a windows 2008 R2 64bit machine without much success. When I try to run the website I get the error detailed below. This only happens when I run the site under .NET 4. It works when I run it under .NET 2.
I have also tried going to a test aspx page to see what happens and it also give me the same error so it is obviously something to do with .NET 4 or the way I have it set up. I am thinking it might be a permissions thing but I am not sure what permissions should be set where. Please note this is the full version of .NET 4. The error I keep getting is:
HTTP Error 500.0 - Internal Server Error
An error message detailing the cause of this specific request failure can be found in the application event log of the web server. Please review this log entry to discover what caused this error to occur.Detailed Error Information
Module AspNetInitClrHostFailureModule
Notification BeginRequest
Handler PageHandlerFactory-Integrated-4.0 [code]....
Most likely causes: The module could not be found.IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred.
IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly.
IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL.
The code in the test.aspx is
<%@ Page language="vb" %>
<html>
<body> [code]....
I try to upload web application to the server. After that I access it through http://..., but get
[Code]....
I search on the web, and add IIS_IUSRS to security of the folder of web application, and upload again. But still get same error. I need help on this,
the same application is working fine in 32 bit machine of my colleague where as in my 64 bit machine I am getting the following error. I also tried by changing Target Platform of the web app, under Properties-->Build-->Platform Target: From X86 to X64, in fact I tried all 3.
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
Detailed Error Information:
Module
IIS Web Core
Notification
BeginRequest
[Code]....
Config Source:
18: <validation validateIntegratedModeConfiguration="false"/>
19: <handlers>
20: <remove name="ChartImageHandler"/>
More Information: This error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error.
View more information »
I created a Website and i upload it using the asp.net development server.
So on the explorer the address is something like this http://localhost:port
The problem is that i can't access the Website(while its uploaded) using my internal IP from within the network.
So if i type http://10.0.0.180:port i get an error "Internet explorer cannot display the webpage".
I disabled my firewall(windows 7).
I do have another PC on the intranet and am not able to access the website using my internal IP address.
View 1 RepliesI did lot of R & D to implement website internal search in asp.net.
I have found a good article in code project
[URL]
It has some limitations
Search with special characters is not working.
Pdf and word documents are not searching.
Not able to high light the searched text.
If I am implementing this in master page then child title is not displayed in result page.
Requirement:
I need to implement search result should be like this [URL] In description the search text must be highlighted.
Note: I need to implement this with coding not any 3rd party tool (I know lots of 3rd party website which do free hosting but they will post there adds and logo). Moreover i dont want to use any database for this internal searching.
Iam working on internal Website search as user can search any thing in the website
Now i dont have idea from where i can get start ?? how search will work .it should be whole database search or pages only???
I'm very new to ASP and have been writing a site which has been working fine both in development and on my production server.
However I added some reports to my site and now it works fine when I run debug on my local machine, but when I package the solution and move it onto my production server I get:
HTTP Error 500.23 - Internal Server Error
An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode.
I'm suing server 2008 STD X64 with IIS7. I've made sure all my windows updates are done.
I've no idea whats causing this. I've tried removing the pages with reports on and I still get the same issue.
what is the difference in C# between the access modifiers internal and protected internal?
View 4 RepliesI have an existing ASP.NET application and there is a requirement in which i need to use ASP.NET MVC in that.
So altogether i need to mixing ASP.NET Webforms and ASP.NET MVC I am following an article [URL] I am done with all the steps. But its not working as expected.
[Code]....
When ever i add this to the web.config i am getting error. HTTP Error 500.22 - Internal Server Error An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode. ERROR CODE: 0x80070032 My OS is Vista Enterprise Edition.
Im using Google Analytics Dashboard Control which are available at [URL] Issue is its working fine when im connected to internet but if im using it on a machine that doesnt have internet access then it shows Server Error in '/' Application. The remote name could not be resolved: '[URL]' I want to catch this exception and shows a friendly message to user. Im calling these dashboard control on my View in an iframe like this <iframe src="../../GoogleAnalytics/Visitor.aspx" height="275"></iframe> and if i place try catch in Visitor.aspx page it doesnot catch the exception. How should i catch this exception, Im using asp.net mvc 2 with c#
View 3 Replies