FormView Default Value Is Lost After Insert
Apr 21, 2012
I have a FormView that is in Insert mode and at page load I assign the current date to a field in the FormView. This works. But after I click Insert, the default date gets cleared out of the FormView and does not come back.I have stepped through the code in debug mode and even though there is a post back and the page load code runs again, the default field is not populated. For one thing, during this postback, the FormView still contains it's field values.
While stepping through in debug mode, the last thing to happen is the InsertTemplate section of the included code, below. After the last text box is referenced within the InsertTemplate, the FormView values go blank and the GridView that it feeds gets a new row. But processing does not come back to the code behine file and the default date field stays blank.I have been trying to find an event that happens after the FormView empites itself of it's values so that I can set the date field the same way I am setting it on page load, but so far nothing works.
Code:
<asp:FormView ID="FormView_Discussion_Input" runat="server" CellPadding="4"
DataKeyNames="Discussion_ID" DataSourceID="DataSource_Discussions_Input" DefaultMode="Insert"
ForeColor="#333333" Width="695px" BorderStyle="Groove" BorderColor="Black"
BorderWidth="1px">
<FooterStyle BackColor="#990000" Font-Bold="True" ForeColor="White" />
<RowStyle BackColor="#FFFBD6" ForeColor="#333333" />
[code]....
View 1 Replies
Similar Messages:
Jan 30, 2010
Formview1 datasource ID is SQLTest. When I click New on the form and go into insertmode, is there an easy way to auto file textboxID to the value of the NextIDNumber field ( field 9) from SQLTest datasource?
View 3 Replies
Mar 22, 2010
I'm using a formview in Insert mode with an AccessDataSource. I want to switch to readonly mode upon insertion to let the user confirm the input worked, then give them the option to insert a new record. If I set the DefaultMode to Insert, then after the first record is inserted, I get a new blank insertion form (no confirmation). If I set the DefaultMode to ReadOnly, after insertion, I get a blank form (presumably because I am not on the record just inserted).
How do I get the just inserted record to display? If I need to set the ID of the formview to the just inserted record OnInserted, how do I get that given I'm using an AccessDataSource?
View 6 Replies
Mar 31, 2010
I have a page that has a formview. Right now, I can only get it to default to the select view with an option at the bottom of the results to click New... allowing to insert a new record. I'd like to default to the insert view. How do I do
View 3 Replies
Aug 25, 2010
I need to use a RadioButton within a FormView, moreover must have access to OldValue and NewValue, but when I use the RadioButton returns "" as in both OldValue NewValue.
View 4 Replies
Jan 21, 2011
I use GridView & FormView to update a record. but when I click the "save" button, throw an except : FormView must be in the insert mode to insert a record. The record has been updated success, and I didn't change the mode of the FormView, how this error comes?
View 3 Replies
Feb 22, 2010
I installed the dotnetnuke starter kit for VS 2008 and now when I go to create a new website or project, the only template is a dotnetnuke website. I have lost all of the default templates that come with VS. Is there some way I can restore those?
View 3 Replies
Feb 4, 2011
I use the FormView control quite a bit, but I wish I had more control over the default templates.
When I drag a FormView from the toolbox onto my page and point it to a DataSource control it prepopulates the ItemTemplate, EditItemTemplate and InsertItemTemplates, but it doesn't do it very well.
For example, the InsertItemTemplate looks like this by default:
<InsertItemTemplate>
id:
<asp:TextBox ID="IDTextBox" runat="server" Text='<%# Bind("id") %>' />
<br />
Name:
<asp:TextBox ID="NameTextBox" runat="server" Text='<%# Bind("Name") %>' />
...
</InsertItemTemplate>
But what I would prefer is a good old fashioned html table
<InsertItemTemplate>
<table>
<tr>
<td>
id:
</td>
<td>
<asp:TextBox ID="IDTextBox" runat="server" Text='<%# Bind("id") %>' />
</td>
<tr>
...
</table>
</insertItemTemplate>
I know I can use a DetailsView to get a table rendered out, but I end up modifying the form so much that I prefer to use the FormView. It's just that I would like Visual Studio to start me out a bit closer to where I want to end up.
I would imagine that there is a T4 template somewhere in the guts of VS that I might be able to modify to get this done.
View 2 Replies
Mar 12, 2010
Below is a line I have in my ItemTemplate of a FormView. The value in the table is null rather than true/false. Is there any way I can set the default for this to be false if it is null? Or can I do this in my stored procedure in the Select statement to return false if null?
Code:
<asp:CheckBox ID="chkCharges" runat="server" Checked='<%# Bind("MCOverrideCharges") %>'
Text="Yes" Enabled = "False" />
View 2 Replies
Apr 5, 2011
For unknown reason, I lost all default controls in the toolbox except for html controls. How to restore them back?
View 2 Replies
Jul 11, 2010
I want to change the default formview generated template. I don't mean change the itemtemple on each page, I mean what VS generates when ever you databind the formview. I want to change it so it uses <label...>xxx</label> instead of xxx <asp....
View 2 Replies
Jul 16, 2012
I bind dropdownlist in my page
protected void Page_Load(object sender, EventArgs e) {
BindDropDownList(DDL1, "city1", "name", "ID");
DDL1.Items.Insert(0, new ListItem("select city", "0"));
}
And SP
LTER procedure [dbo].[city1]
as
begin
select id,Name
from city
end
And design code
<asp:DropDownList ID="DDL2" runat="server" CssClass="daddsd">
</asp:DropDownList>
And here is imagebutton code that when click on it update data into table
protected void ImageButton_Click1(object sender, ImageClickEventArgs e) {
string data = Server.UrlDecode(Request.QueryString["BehCode2"]);
SqlCommand _cmd = new SqlCommand("insertinfo", _cn);
_cmd.CommandType = CommandType.StoredProcedure;
_cn.Open();
[Code] ....
Here when i click on button it insert all data into table but it didn't insert my selected item from dropdownlist it insert select city that i define in page_load
DDL1.Items.Insert(0, new ListItem("select city", "0"));
And when i delete this code from page load it insert in table first row of my table it didn't insert my selected item from dropdown list.
View 1 Replies
Sep 6, 2010
I am having a problem getting the FormView Control in Visual Studio 2010 inserting data into a SQL database I have managed to view the data that is currently in the database but when I click insert I get an error message I just don't understand what I am doing wrong
View 1 Replies
Feb 18, 2010
This is probably a dumb question, but I have to ask because I spend so much time editing my formviews and listviews. Is there a way to edit the default template setup for these controls, in the code or somewhere? When you drag them over you get the default text with textbox column names; then I spend over 30 mins editing each to look the way I want it to.
I know I can create standard templates for WebForms and save them as Exported Templates.
And is it possible to edit the default control when you drag them on to the page, to list certain attributes automatically. example (validation controls you always have to add ControltoValidate I would like to drag mine onto the page and it say controltovalidate="" and then all I do is fill in the blank. Intellisense is fine, but sometimes you get brain freeze after hours of web design and forget the needed attribute and you have all to go through all of the errors and mistakes.
The ultimate would be, to drag a FormView Control and when you Refresh the Schema, you get textboxes, label controls instead of text for column name, and divs for forms, and Image Buttons , I am sure there is an XML file that runs the code that you can edit or something.
OR
ASP Developers, When you develop the next ServicePack allow us to edit or create default templates to customize the default templates, in VS and VWD.
View 4 Replies
Sep 3, 2010
I have a formview where DefaultMode="Insert". Underneath, I have a gridview that displays the information from the inserts. Is there a way to update the information as well as insert? Maybe there is a better way to do what I'm trying to do.
View 12 Replies
Oct 11, 2010
I have a simple FormView (fvDespatchPart) which updates the status of an order and it's despatch date; the despatch date being retrieved from a textbox (txtRentalDespatchDate)
held within the FormView. The FormView's DefaultMode is set to Edit.
I have been trying to set the default entry for txtRentalDespatchDate to today's date in the code behind, using:
Dim dtNow As Date = Today()
Dim txtRentalDespatchDate As Webcontrols.Textbox = fvDespatchPart.FindControl("txtRentalDespatchDate") [code].....
I have had no trouble doing this in the past with FormViews whose default mode is set to Insert or Item, but in Edit mode it just does not seem to want to co-operate. I have read a few help posts, and have tried:
Putting that code in LoadComplete, PreRender, PreRenderComplete Page events, as well as the FormView's databound event. I've also tried nesting it within a ...
If fvDespatchPart.CurrentMode = FormViewMode.Edit Then
End If
... just to make sure if is in the right mode.
Nothing yet has resulted in anything but the same old error.
View 4 Replies
Mar 21, 2011
In FormView (insert) I have a number of textboxes into which number will be inputted. I need all these textboxes to add up and display the total in a Label which I can then insert into the database with all the individual values. I expected this to be a simple thing... Then it appears that the best way to do this is to use javascript, which I have never used! SO this is my attempt which is a combination of things I found on the net, In the head (Clientapp is the name of my form)
<script type="text/javascript" language="javascript">
function Add1(Clientapp) {
var a, b, c;
a = document.Clientapp.BondRepaymentTextBox.Value;
b = document.Clientapp.PropertyRentalTextBox.Value;
c = eval(a) + eval(b);
document.Clientapp.ceTotalTextBox.Value = c;
}
</script>
Code behind on Page Load
PropertyRentalTextBox.Attributes["onchange"] = "javascript: Changed( this );";
View 4 Replies
Mar 22, 2010
After I use FormView in InsertMode and the record is added, I want it to switch directly to EditMode.
I assume I would place this command in this action:
protected
void FormView1_ItemInserted(object sender,
FormViewInsertedEventArgs e)
However, I can't find the correct command to issue.
View 3 Replies
Jun 24, 2010
I have a web app that uses a form view to collect some user info that inserts into a SQL database.
when run locally from VWD this works fine so i know the insert statement is correct.
when deployed to an IIS server my SQL insert doesn't work i don't get an error but the data is not inserted into the DB. I can run selects and deletes ok from the server its just the insert that doesn't work.
I have had a DBA check the database and the user my application is running under is DBO so has the correct permissions.
We've run SQL profiler and can't see the inserts reaching the DB.
can anyone point me in the right direction of where to start troobleshooting this?
my web site is running on windows 2008 R2 so i can't install Front page extensions so can't open the web site from my local machine to try to debug.
View 3 Replies
Dec 30, 2010
I am using the query builder to frame an Insert query that I am using for a FormsView control on a web page. The problem is there are more than 50 fields that need to be inserted and I am wondering if there is any better way to do this... than manually typing in IdNames of controls on the web page in the VALUES (,,,,,,,,,,.......) section of the SQL statement.
View 3 Replies
Sep 27, 2010
How to insert picture into DB from formview?
What control I have to use to locate picture and what technique to adopt.
My working enviornment is 2.0.
In database the table is already created with Binaryfield to store pictures.
View 2 Replies
Feb 22, 2010
I have a series of classes that loosely fit the following pattern:
public class CustomerInfo {
public int Id {get; set;}
public string Name {get; set;}
public class CustomerTable {
public bool Insert(CustomerInfo info) { /*...*/ }
[code]...
View 1 Replies
Jun 5, 2013
I want to know if it's possible to return the identity value after an insert working with just the insertCommand and the insert parameters - something like this (but this isn't working):
Code:
<asp:SqlDataSource ID="sqlCustomerInformation" runat="server" ConnectionString="<%$ ConnectionStrings:SloanLEDLightingSystemsQuoteToolConnectionString %>"
SelectCommand="SELECT quoteCustomerInformationId,contactname FROM QuoteCustomerInformation order by quoteCustomerInformationId"
[Code] ....
Not sure what's wrong with my code. Should I be doing this in the code behind? I'm also confused as to how I would then retrieve the identity value in the code behind - on iteminserted.
View 2 Replies
Nov 4, 2010
How can I replace empty space in textbox with a dash (-) before form values are inserted?
[Code]....
I also tried using the datasource's Inserting method but neither works.
View 3 Replies
Jun 11, 2010
I'm trying to use formview in order to do insert of a new entity object (called Customer) Customer has a reference to another entity called Address. How can I fill both of them in the same formview?
View 1 Replies
