I have a page that has a formview. Right now, I can only get it to default to the select view with an option at the bottom of the results to click New... allowing to insert a new record. I'd like to default to the insert view. How do I do
View 3 Replies
I use GridView & FormView to update a record. but when I click the "save" button, throw an except : FormView must be in the insert mode to insert a record. The record has been updated success, and I didn't change the mode of the FormView, how this error comes?
View 3 RepliesFormview1 datasource ID is SQLTest. When I click New on the form and go into insertmode, is there an easy way to auto file textboxID to the value of the NextIDNumber field ( field 9) from SQLTest datasource?
View 3 RepliesI'm using a formview in Insert mode with an AccessDataSource. I want to switch to readonly mode upon insertion to let the user confirm the input worked, then give them the option to insert a new record. If I set the DefaultMode to Insert, then after the first record is inserted, I get a new blank insertion form (no confirmation). If I set the DefaultMode to ReadOnly, after insertion, I get a blank form (presumably because I am not on the record just inserted).
How do I get the just inserted record to display? If I need to set the ID of the formview to the just inserted record OnInserted, how do I get that given I'm using an AccessDataSource?
Is it possible to add a date time picker to my form view? I use the form view to insert new records into a gridview connected to a Access database.
PS this is on a webpage don't know if that makes a difference
How to Call a record on datalist by button click and display record on formview in model using Username
Here is what i tried
<asp:DataList ID="GetMergedAll." runat="server">
<asp:Label ID="Name" runat="server" Text="Label"></asp:Label>
<asp:Label ID="Post" runat="server" Text="Label"></asp:Label>
<asp:LinkButton ID="LinkButton6" runat="server">LinkButton</asp:LinkButton>
</asp:DataList>
protected void Page_Load(object sender, EventArgs e)
[Code] ....
HTML
model here
<asp:FormView ID="Post" runat="server">
<asp:Label ID="Name" runat="server" Text="Label"></asp:Label>
<asp:Label ID="Post" runat="server" Text="Label"></asp:Label>
</asp:FormView>
I have a FormView that is in Insert mode and at page load I assign the current date to a field in the FormView. This works. But after I click Insert, the default date gets cleared out of the FormView and does not come back.I have stepped through the code in debug mode and even though there is a post back and the page load code runs again, the default field is not populated. For one thing, during this postback, the FormView still contains it's field values.
While stepping through in debug mode, the last thing to happen is the InsertTemplate section of the included code, below. After the last text box is referenced within the InsertTemplate, the FormView values go blank and the GridView that it feeds gets a new row. But processing does not come back to the code behine file and the default date field stays blank.I have been trying to find an event that happens after the FormView empites itself of it's values so that I can set the date field the same way I am setting it on page load, but so far nothing works.
Code:
<asp:FormView ID="FormView_Discussion_Input" runat="server" CellPadding="4"
DataKeyNames="Discussion_ID" DataSourceID="DataSource_Discussions_Input" DefaultMode="Insert"
ForeColor="#333333" Width="695px" BorderStyle="Groove" BorderColor="Black"
BorderWidth="1px">
<FooterStyle BackColor="#990000" Font-Bold="True" ForeColor="White" />
<RowStyle BackColor="#FFFBD6" ForeColor="#333333" />
[code]....
I have a question on a simple application - menu's which contain 0...x recipies. I have a formview, and in the formview I have a dropdownlist. The query that populates the dropdownlist depends on the formview's current record ID, how do I get that to put into my data source?
Note that I would prefer not to use the RouteParameter that gives the Formview it's ID as the RouteParameter doesn't use the formview's primary key as I'm using the menu name instead
My code is:
[Code]....
<asp:formview id="fvMenu" datakeynames="MenuID" datasourceid="dsMenu" runat="server">
I am using FormView to display one record at a time and after I add a new record, it won't display the last recorded added.How can I force FormView to display the last record added?
View 2 RepliesI have a form view with a normal paging scheme with links to go to the first, previous, next, last, or the
nth record. I want to add a little bit more functionality to this by allow the user to search within the data set while keeping the original paging scheme.
The table structure has one primary key, pk1, and k2 along with some other data fields. There are about 5,000 records in the table.
Currently, when the page loads, I see something like the following: ([______] represents a textbox)
First Prev Record 1 of 5000 Next
Last Go to record # [_____] Go
Go to: pk1: [_____] AND pk2: [______] Go
pk1: 5000
k2: 400
...rest of the fields
I want something like this though when the user enters 8000 in the pk1 textbox and 500 in the k2 textbox:
First Prev Record 3958 of 5000 Next
Last Go to record # [_____] Go
pk1: 5000
k2: 400
...rest of the fields
The problem I have is that the pagination won't display the record's place out of the initial query (3958 of 5000), but rather displays 1 of 38. I want to allow the user to be able to *jump to* the record that they are looking for instead of filtering the results.
I have a Formview to add new record to a sqlsource. This Form in Edit mode has New button for adding new records so this is perfect.
However in some case, this source could be refreshed and all records deleted and then ready to accept new records. However, I found once there is no record returned from sqlsdatasource, this Formview does not display at all, including that New button and so the whole page is blank.
how to make sure the Formview display that New button even when their is not yet record from the database.
When page load it is invisible. I have a button1 onclick make it visible and people can input data the press insert. I set it invisible right in Formview Insert eventhandler code.
When people click that button1 again to add 2nd record the form appear again as desired. However, the data from 1st record is still there.
What code I can make in eventhandler to make sure when button1 is clicked the Formview does not contain any data from last entry ?
The formview clear the data from 1st record if I did not set visible/invisible.
I have FormviewPagerTemplate that is working fine but the problem is coming when I'm in the first or last record only.
if I'm in the first record and want to navigate to the second record I have to hit next linkbutton twice
if I'm in the Last record and want to navigate to the previios record I have to hit previuos linkbutton twice
See my code below:
[Code]....
I'm putting together a page that allows the user to enter a new record in an SQL table. A bunch of the fields in the table are bit datatypes. I want to use CheckBoxes to correspond to the bit datatype columns in the SQL table.
How do I bind the checkboxes to the SQL table columns?
Here's what I have, not sure if this is right:
[Code]....
I am making a message module in asp.net with database of sql. i have made a gridview and enabled selecting. and a form view is synchorised with grid view on selecting. i am writing update sql but could not get a way to take data on Gridview or Formview to compare the record in sql database.
this is my page view
[Code]....
This my vb code
This is probably a dumb question, but I have to ask because I spend so much time editing my formviews and listviews. Is there a way to edit the default template setup for these controls, in the code or somewhere? When you drag them over you get the default text with textbox column names; then I spend over 30 mins editing each to look the way I want it to.
I know I can create standard templates for WebForms and save them as Exported Templates.
And is it possible to edit the default control when you drag them on to the page, to list certain attributes automatically. example (validation controls you always have to add ControltoValidate I would like to drag mine onto the page and it say controltovalidate="" and then all I do is fill in the blank. Intellisense is fine, but sometimes you get brain freeze after hours of web design and forget the needed attribute and you have all to go through all of the errors and mistakes.
The ultimate would be, to drag a FormView Control and when you Refresh the Schema, you get textboxes, label controls instead of text for column name, and divs for forms, and Image Buttons , I am sure there is an XML file that runs the code that you can edit or something.
OR
ASP Developers, When you develop the next ServicePack allow us to edit or create default templates to customize the default templates, in VS and VWD.
I use Gridview along with Formview for master/detail viewing. When I change sorting in gridview selected index changes, too. I mean, eg first top record is still selected but it's another id. What I want is to keep id of selected record, in case of need changing a page
[code]....
I have a simple FormView (fvDespatchPart) which updates the status of an order and it's despatch date; the despatch date being retrieved from a textbox (txtRentalDespatchDate)
held within the FormView. The FormView's DefaultMode is set to Edit.
I have been trying to set the default entry for txtRentalDespatchDate to today's date in the code behind, using:
Dim dtNow As Date = Today()
Dim txtRentalDespatchDate As Webcontrols.Textbox = fvDespatchPart.FindControl("txtRentalDespatchDate") [code].....
I have had no trouble doing this in the past with FormViews whose default mode is set to Insert or Item, but in Edit mode it just does not seem to want to co-operate. I have read a few help posts, and have tried:
Putting that code in LoadComplete, PreRender, PreRenderComplete Page events, as well as the FormView's databound event. I've also tried nesting it within a ...
If fvDespatchPart.CurrentMode = FormViewMode.Edit Then
End If
... just to make sure if is in the right mode.
Nothing yet has resulted in anything but the same old error.
I am using the query builder to frame an Insert query that I am using for a FormsView control on a web page. The problem is there are more than 50 fields that need to be inserted and I am wondering if there is any better way to do this... than manually typing in IdNames of controls on the web page in the VALUES (,,,,,,,,,,.......) section of the SQL statement.
View 3 RepliesHow to insert picture into DB from formview?
What control I have to use to locate picture and what technique to adopt.
My working enviornment is 2.0.
In database the table is already created with Binaryfield to store pictures.
I have a FormView with default mode set to "Edit". When I click the Update after making changes the form reopens in the Insert mode.
<asp:FormView
ID="FormView2"
runat="server"
CellPadding="4"
DataKeyNames="ID"
DataSourceID="SqlDataSource3"
DefaultMode="Edit"
EnableModelValidation="True"
Font-Names="Calibri"
Font-Size="9pt"
ForeColor="#FFFFFF"
Height="600px"
Width="1000px"
onitemupdated="FormView2_ItemUpdated"> What am I doing wrong
I have a formview with insert function into "table1". In that formview i also have a dropdownlist listed with records from "table2". (This dropdown is of course instead of a textbox). get "table1" inserted when one of the field is from a different table?
View 1 RepliesI have a page with an EntityDataSource and I want to insert a new item using a FormView. However, the SQL database has a varbinary field which I need to insert an image into.
So far, I have all the rest of the FormView correct and it saves no problem. I can also use the asp:FileUpload to correctly obtain the data. I am assumin that I need to add some C# code to the FormView1_ItemInserting Event Handler, but that is where I am stuck. So far, this is what I have:
[Code]....
Would somebody be so kind as to point me in the right direction with the correct code to add this item to the data I am saving.
How do I clear my formview after a record has been inserted or deleted? At the moment it just sits in the previous state with the same details in the fields, still with the Insert button. Either it would be good to drop the formview altogether (I have a grid view on the same page) or move into the edit mode for the just inserted record.
Also the same with the delete - the formview stays on screen with the deleted record details and the delete button still available - I know it has fired though as my gridview is updated.
I have a formview tied to a gridview. The formview shows the data for the row selected in the gridview. The formview is invisible by default , default mode is readonly and becomes visible only on Selecting a row in the gridview. I make it visible in the SelectedIndexchanged event of the gridview. There are Insert and update buttons present outside the formview which perform the insert and update using code-behind. The code is below.
AFter an insert or update, the formview makes invisible again. I want to show the formview with the newly inserted or updated row in Read-only mode. How do I do this?
protected
void gvEvent_SelectedIndexChanged(object
sender, EventArgs
e)
{
if (gvEvent.SelectedIndex
[Code]....
