Formview1 datasource ID is SQLTest. When I click New on the form and go into insertmode, is there an easy way to auto file textboxID to the value of the NextIDNumber field ( field 9) from SQLTest datasource?
View 3 RepliesI use GridView & FormView to update a record. but when I click the "save" button, throw an except : FormView must be in the insert mode to insert a record. The record has been updated success, and I didn't change the mode of the FormView, how this error comes?
View 3 RepliesI have a FormView with default mode set to "Edit". When I click the Update after making changes the form reopens in the Insert mode.
<asp:FormView
ID="FormView2"
runat="server"
CellPadding="4"
DataKeyNames="ID"
DataSourceID="SqlDataSource3"
DefaultMode="Edit"
EnableModelValidation="True"
Font-Names="Calibri"
Font-Size="9pt"
ForeColor="#FFFFFF"
Height="600px"
Width="1000px"
onitemupdated="FormView2_ItemUpdated"> What am I doing wrong
So, I'm trying to use form view in insert mode on a dedicated aspx page. So when a user clicks "Add New" from the main GridView page, it will take the user to an Insert.aspx page that will be in Insert mode ready to collect information.
Here's what I have so far, and all I get is a blank page when I try to run it.
[code]....
I have a FormView at the very bottom of the page in insert/edit mode. When I click insert/update button, the whole page reload and the pointer does not keep within the Formview but go to the very top of the page far away from the desired FormView.
What can I do here to prevent cursor going outside the Formview ? Is it I can use update panel ? What and where I should use the tags ? Or there are other better way ?
How do I set the value of a field in a detailsview to the selectedvalue of a gridview on the same page? I am also trying to set today date as value of another field in the detailsview as well as UserID. I wrote the following codebehind for the date setting:
TextBox tb = (TextBox)DetailsView2.FindControl("TextBoxCreDate");
tb.Text=System.DateTime.Now.ToShortDateString();
TextBoxCreDate is a template field in my DetailsView.
Unfortunately, I get a Object reference not set to an instance of an object. Error message.
I created a formview that I am using for data input (DefaultMode=Insert)
One of the objects I have is a text box (see below)
[code]....
When I click submit I get a message that I cannot insert a Null into the field IntershipNumAvailable. This makes sense since I made this field a required field in the database.
How do I get the form to recognize that the user selected item is the one I want to write to the database?
What changes do I need to make here? Do I need to make changes to my parameter list?
I have a gridview on Contacts.aspx. From this page, I want an "Add New Contact" ImageButton to open the Formview in the ContactDetails.aspx page in Insert mode....
I'm in VB2010 in C#
I have 2 dropdownlist in my detailsview that second dropdownlist get thier data based first dropdownlist selecet value;
following error arised:
Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control
I solve it by this solution:
[Code]....
current problem:
when I want to insert new item ( detailsview insert mode), default value of my DropdownList sent to parmlist
I'm using a formview in Insert mode with an AccessDataSource. I want to switch to readonly mode upon insertion to let the user confirm the input worked, then give them the option to insert a new record. If I set the DefaultMode to Insert, then after the first record is inserted, I get a new blank insertion form (no confirmation). If I set the DefaultMode to ReadOnly, after insertion, I get a blank form (presumably because I am not on the record just inserted).
How do I get the just inserted record to display? If I need to set the ID of the formview to the just inserted record OnInserted, how do I get that given I'm using an AccessDataSource?
I have a page that has a formview. Right now, I can only get it to default to the select view with an option at the bottom of the results to click New... allowing to insert a new record. I'd like to default to the insert view. How do I do
View 3 Replieshave a WebForm with a Form View to insert new items in my database.These items that i will insert also are conected to other many-to-many relations that i also wanna add after my new item is inserted.For Example: With the classic Autors-Books data base (autors with many books each books with many autors), i want a FormView that for defoult enter to the InsertMode where you will add a new Autor with name, age, style, etc... After you insert this new autor i wanna show the details of this autor but also his books (when new this table will be empty) and below that table i want a button that says "Add a new book to this autor"
View 1 RepliesWhen a FormView control is in insert mode, a data entry form is shown where the user will type a value into each textbox corresponding to a table column.
How do I disable data entry for one of these textboxes and instead, assign a system-calculated value to that text box?
.NET newbie. I know there has to be a way to do this.I have a details view with it's default mode set to Insert. This is to be used as a form for users to enter records into a database. For two of the fields, I want to pre-populate the field with information. Specifically, I have a vb script with a few functions to query Active Directory to return the user's name based upon their user id. This script works fine.I call the functions for the user name like this:
<InsertItemTemplate>
<asp:TextBox ID="txtUserID" runat="server" Text='<%#CurrentUID() %>'></asp:TextBox>
</InsertItemTemplate>
<InsertItemTemplate>
<asp:TextBox ID="txtUserName" runat="server" Text='<%# GetUserName(CurrentUID()) %>'></asp:TextBox>
</InsertItemTemplate>
When the page loads, this populates the text boxes with the user id and the user name.But when the form is submitted, the values in the text boxes are not inserted in to the database.How can I set default values for the fields when the values come from functions?
I have a FormView that is in Insert mode and at page load I assign the current date to a field in the FormView. This works. But after I click Insert, the default date gets cleared out of the FormView and does not come back.I have stepped through the code in debug mode and even though there is a post back and the page load code runs again, the default field is not populated. For one thing, during this postback, the FormView still contains it's field values.
While stepping through in debug mode, the last thing to happen is the InsertTemplate section of the included code, below. After the last text box is referenced within the InsertTemplate, the FormView values go blank and the GridView that it feeds gets a new row. But processing does not come back to the code behine file and the default date field stays blank.I have been trying to find an event that happens after the FormView empites itself of it's values so that I can set the date field the same way I am setting it on page load, but so far nothing works.
Code:
<asp:FormView ID="FormView_Discussion_Input" runat="server" CellPadding="4"
DataKeyNames="Discussion_ID" DataSourceID="DataSource_Discussions_Input" DefaultMode="Insert"
ForeColor="#333333" Width="695px" BorderStyle="Groove" BorderColor="Black"
BorderWidth="1px">
<FooterStyle BackColor="#990000" Font-Bold="True" ForeColor="White" />
<RowStyle BackColor="#FFFBD6" ForeColor="#333333" />
[code]....
This is what i have using VS and VB: formview that is bound to a sqldatasource. In the formview i set up three panels and the visibilty is controlled by three buttons. I want to be able to click the edit link button and have the panel that is visible in readonly mode be the one visible in editmode
View 6 RepliesI have created a FormView whose defaultmode = "insert". When loaded the FormView displays the InsertItemTemplate. At the top of the page is a DropDownList used to select Clients. I have added a list Item to the DropDownList with value = "0" and text= "Select Client" option. So the Page is in Insert Mode. SO FAR EVERYTHING IS AS EXPECTED.
When I select a Client from the DropDownList, the page remains in Insert Mode (Don't understand why? ) Could it be the default Mode setting? So I added the following vb code.
Protected Sub ddlSelectClient_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlSelectClient.SelectedIndexChanged
If ddlSelectClient.Text <> "(Select Client)" Then
If FormView1.CurrentMode = FormViewMode.Insert Then
FormView1.ChangeMode(FormViewMode.Edit)
End If
End If
End Sub
So after an existing Client is selected, the FormView Mode should be changed to EDIT. AND INDEED THE EDIT ITEM TEMPLATE IS DISPLAYED.
Ah but life is not so simple (after all this is a Microsoft Application). So I enter data in some fields and click the [Update] Button.
Then I get the following message:
FormView 'FormView1' must be in edit mode to update a record.
THe FormView displays the Edit Template, the Update and Cancel Buttons are displayed. All this should mean I am in edit mode.
Just call me FrankenSoft !@#$%^^& or is it MicroStein?
Oh by the way I'm using Linq to SQL data sourcess. Should I be? I'm having a lot of problems with the FormView using Linq.
I'm trying execute code only when FormView is in Edit mode ---but the code following line this is being executed even in read-only mode.
If formname.CurrentMode
= FormViewMode.Edit
Then
there are 2 pages (SummaryGridviewPage.aspx and FormviewPage.aspx) there are insert, item and update templates in the FormviewPage 1st case - there is no problem to insert new record, select and update action in the FormviewPage
2nd case - However, there is problem when i select a record in GV and direct to FormviewPage for edit this code is added in Formviewpage to open the record at readonly mode, no problem
Private Sub RF_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Session("RecordID") <> "" Then ' to check New or Old record
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.ChangeMode(FormViewMode.ReadOnly)
End If
End Sub
however, no record if go further from readonly to edit mode then Code is added to the Edit button
Protected Sub BtnEdit_Click(ByVal sender As Object, ByVal e As EventArgs)
FormViewProject.ChangeMode(FormViewMode.Edit)
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.DataBind()
End Sub
Now edit problem is solved but when go back to the 1st case (new record, and then edit) Now new record can be inserted, and then show it in readonly mode. but then try to go to edit mode, no record show i think BtnEdit_Click code is conflicted with the built-in "Edit" command Could anyone show me some info how formview retrieve specific record in a proper way?
I need to Check a formview for records on page load and if empty, I need to set it to edit mode.
View 1 Repliescan I change a formview's mode (edit mode, insert mode, etc) client side?
I have a html image that once clicked should change a formview's mode.
I have a combobox that is used as a control for Formview, so when the user selects a name from the combobox the data in formview displays in edit mode. However, some if the data that is displayed in formview needs to be empty. For example if the Date is being pulled in, it needs to be empty or null in edit mode.
View 4 RepliesI've been spending two days on this. My page formview is in a tab container and I need it to update, insert and display data. Insert and display are ok as long as the default mode is Insert. The problem here is edit mode, it's able to get values from the db(oracle) and display them in edit mode, but when I click save, any values I typed out on the textboxes do not get captured. When I call on my db update class, it just sends old db values. Here is the process: formview shows data selected from gridview, then an update button is clicked to edit the data. there is also a SAVE button to send updated data to db. Example: description textbox = "test", then I type out a different value, and in debug mode, the textbox.text still shows "test" after clicking save.
[Code]....
[Code]....
How to refer to a control (label) which is on a Formview (in Edit mode). The formview is on a Multiview...
View 3 RepliesI'm having a hard time solving what should (I think) be an easy problem. I have a formview defaulting to Editmode. One of my data fields is a binary image. How can I change the editItem template to allow a user to upload a new image into the binary image field?
View 2 Replies