Forms Data Controls :: Adding A Select Parameter Breaks Gridview?

Jul 27, 2010

I am defininging all my sqldatasource select parameters upfront in the .aspx file. Then based on user filter choices, I modify the Select Command to include those parameters. Works fine, but when I add one of these parameters, the bound grid doesn't pull back any results. No error message is given.

If I remove the ToteID control parameter line below, everything works fine. But with it in, the SQLDataSource.Selecting event doesn't even fire.



View 7 Replies

Similar Messages:

Forms Data Controls :: CheckBox Adding Parameter To Gridview?

Mar 22, 2011

I have a [Code]....

with showing all A table C column.


My A table has two column.

B-->Primary Key

C--> Every C has a unique B.

I have an SQL like this for my Gridview Source;


Something like that. My SQL syntax isn't very well. I hope i can tell what i want..

What REALLY want is, When i click a button, showing in Gridview with second SQL , BUT only i selected in CheckBoxList.

Is there any way adding to parameter in SQL? How can i do that?

View 8 Replies

Forms Data Controls :: Adding Attributes To Row Breaks Paging?

Mar 18, 2011

I have a problem with a GridView that I can't figure out. It's inside an UpdatePanel and has been working fine for a long time. Today I have added a few lines to the code behind to add javascript to each row so that the user can just click the row to view the record. This works fine too, except that it breaks the paging of the GridView and I don't understand why.

Here is my code (The controls lstStatus and txtSearch are elsewhere on the page):


And in the codebehind the lines which break paging are the following three, in the RowDataBound event:


I've tried messing with the viewstate of the UpdatePanel, changing its UpdateMode to 'Always' and it's ChildrenAsTriggers property to 'True' but none of this makes any difference, and besides, it's been working for months as it is until I introduced these three new lines into the code behind.

Can anybody see why add these attributes to the row breaks paging?

View 3 Replies

Forms Data Controls :: Adding Second "select" Command Field To Gridview Programmatically

Mar 16, 2011

I'm trying to add a second command field to an gridview. Essentially, I want the user to have the options to delete and update records on one page. I've gone through gui's to do this that I have found on the web but none of them work. I think that this is because of the fact that I am working with Visual Studio 2008, so the gui's don't match. Plus, my datasource isn't allowing me to add delete parameters, and update parameters. So, my present goal is to have multiple command fields in my gridview. This would also enable me to add a "duplicate record" functionality, as is needed with this program. I would also like add functionality. If possible. I've been doing all this on multiple screens but I believe I should be able to do this on one screen. Here is my gridview and datasource.



View 1 Replies

Forms Data Controls :: Level Breaks In A Gridview Control?

Jan 11, 2010

I have a gridview on my web page. I bind the gridview to a dataset. The dataset has the following fields:

facility, date, patient name, description. Presently, the gridview looks like this when rendered:

ABC Hospital 10/1/2009 John Doe Sore Throat
ABC Hospital 10/2/2009 Jane Doe Mumps
ABC Hospital 10/3/2009 Bill Smith Flu
XYZ Hospital 10/2/2009 Tom Jones Migraine
XYZ Hospital 10/2/2009 Mary Mills Cold

I would like to ony display the facility once for each group. For example, ABC Hospital would only display on the first line and would be blank on the next 2 lines. I think I did this once before but cannot find the code. I have not been able to find a good example on the web.

View 1 Replies

Forms Data Controls :: Gridview With Hover Menu Breaks In 4.0?

May 4, 2010

I have a gridview with a popup menu that successfully runs against Framework 3.5.

In 4.0, the popup no longer seems to be tied to the row that was mouse-overed. the popup still appears, but near the top of the gridview (not near the row) regardlesss of the row that mouse-overed and clicking "Edit" will only edit the top (first) row.

I even tried to simplify and use this example [URL] as a test, the same results occur, run this against 3.5, it works fine, run against 4.0, it breaks. I think there's something wrong with the C# code


there's a better solution with the ClientIDRowSuffix?

View 4 Replies

Forms Data Controls :: Prevent Line Breaks In GridView Cells?

Feb 24, 2011

One column in my GridView has the format 1-2345 (one digit followed by a dash followed by four digits. Normally, everything looks OK, but sometimes the other data in my GriView will expand to two or more "lines" in the same row of data. Unfortunately this causes my cell to look like the following:


This looks really really awful and I need to fix it. You know how in HTML there is the non-breaking space symbol? Well I want a non-breaking dash symbol.

View 2 Replies

Forms Data Controls :: Set Select Parameter From Value In DetailsView?

Jun 17, 2010

How do I set a select parameter from a value in a DetailsView?

View 6 Replies

Forms Data Controls :: Select Parameter For Formview Control?

May 14, 2010

I am doing a library application. I am using a formview control to display and edit the details of an existing borrower.

What I wish to do is to allow the user to enter the borrower barcode into a textbox and select the details of the borrower corresponding to the barcode.

At present I have kept the textbox and a button outside the formview. Once the user enters the barcode in the texbox and clicks the button, the data is displayed in the formview control.

Now, my doubt is that is there a way to keep the textbox inside the formview control itself and use the value(Which should be user input) for selecting the details?

View 13 Replies

Forms Data Controls :: Filter Parameter Works Just For Single Select?

Mar 31, 2011

I have a dropdownlist with multi-select which I am using to filter a gridview. My problem is it only uses the first selected item for filter.

If I select one works fine, if I select 2 items the grid is filtered by the first item selected.


View 2 Replies

Forms Data Controls :: Adding To New Datatable?

Apr 14, 2010

i am using to filter rows

now i want to add those filter rows to a datatable

View 1 Replies

Forms Data Controls :: How To Select A Row In Gridview Without Select Command

Jan 25, 2011

I have gridview. some columns are data, and some are link buttons. now, I need move these link buttons to a hovermenu. this is done. but I got a javascript exception, and it is because if there is no row was selected in gridview, it will pop this.

so, the question is: how can I select a row in gridview without select command? simply by code?

View 3 Replies

Data Controls :: Add Line Breaks To GridView BoundField Data

Jan 24, 2016

I used Save (Display) data from Multi-Line TextBox with Line Breaks to database in ASP.Net. But now I want show data from database into multiline textbox. Separate textbox by two column. In result output this:




How I can solve this?

View 1 Replies

C# - CheckBox Adding Parameter To Gridview?

Mar 22, 2011

I have a CheckBoxList that is showing all A table C column.


My A table has two columns.

B-->Primary Key
C--> Every C has a unique B.

I have an SQL like this for my Gridview Source;

Select <...............>
From <..................>
Where <.................>
(Select A.B
From A
Where A.C IN ALL CheckBoxList.SelectedItem.Value)

Something like that. My SQL syntax isn't very good. I hope you can tell what I want..

What I REALLY want is, when I click a button, Gridview should be populated according to the SQL , BUT filtered by what is selected in CheckBoxList.

Is there any way to add a parameter in the SQL IN clause?

View 2 Replies

Adding Javascript From Code Breaks The Validation On Page?

Nov 13, 2010

What I have is button that should open another page only if textbox length is 8. Javascript must be added from code because it does not simply calls the bla.aspx, it's more like bla.aspx?id=4&code=234 etc etc...

I have this code on server side


on client side i have

<asp:TextBox ID="policyNumberTxt" runat="server" MaxLength="8" CausesValidation="true"></asp:TextBox>
<asp:RegularExpressionValidator ID="policyNumberTxtRev" runat="server"
ControlToValidate="policyNumberTxt" ErrorMessage="Length must be 8."
ValidationExpression="{.{8}.}" ValidationGroup="bla" Display="Dynamic"></asp:RegularExpressionValidator>
<asp:Button ID="printBtn" CssClass="button" Text="Print" runat="server" CausesValidation="true" ValidationGroup="bla" />

What happens is that when I click the button page bla.aspx opens, and even postback is trigered. Validator is showing the message, but page is opened and postback trigered.

How to handle this? Validation is broken...

View 3 Replies

Forms Data Controls :: Adding A "select All Or Any" To A List Item?

Dec 16, 2010

i have a radio button used for search parameter and one option i want to include is a select any or all. I tried using "*" and variations therein but nothing seems to work?


View 9 Replies

Web Forms :: Pass Selected Value Of DropDownList Select Parameter Of SQL Data Source

Sep 20, 2015

I am binding a control which is inside Gridview, using SqlDataSource control as below.

<asp:ComboBox ID="ddlCompany" runat="server" Height="200" Width="240"
DropDownWidth="310" EmptyMessage="- Select Product -" HighlightTemplatedItems="true" CausesValidation="false"
Filter="Contains" AppendDataBoundItems="true" AllowCustomText="true" AutoPostBack="true"
DataTextField="Title" DataValueField="Code" OnSelectedIndexChanged="ddlCompany_SelectedIndexChanged">


In above SqlDataSource control, I had to pass the SelectParameter (whose value is coming from a ComboBox i.e., whatever comboBox value I selcect from ComboBox, its SelectedValue I had to pass it to the SqlDataSource SelectParameter. I am first time using "SqlDataSource". How to pass the SelectedValue of ComboBox into SlecteParameter of SqlDataSource control ?

View 1 Replies

Passing Textbox In Gridview Header Template As A Parameter In A Sqldatasource Select

Nov 4, 2010

I have a gridview that displays the contents of a database table, using an sqlDataSource. That part (including inserting, updating and deleting rows) works perfectly. What I am wanting to do is add a "search" function to restrict the rows returned to a user entered name. I have a textbox for the name to be searched and a "Search" button in the headertemplate as such:


The DataBind fails, with the error:

Could not find control 'txtSearchName' in ControlParameter 'username'.

View 1 Replies

Forms Data Controls :: Pass Parameter To GridView?

Jan 7, 2011

I am trying to pass a URL parameter to a web page that contains a Gridview to make that query dynamic

The URL is http://localhost:3036/people2.aspx?ArvDate=01/03/2011

I would like to add that parameter to the Select statement below (bolded)

<asp:SqlDataSource ID="SqlDataSource2" runat="server"
ConnectionString="<%$ ConnectionStrings:sqlConnection %>"
SelectCommand="SELECT NumPeople, Date1,Time1,Venue FROM People_Count WHERE Date1=XXXXXXXXXX and c

I already have this code to capture from the URL

Dim strPar As String
strPar = Request.QueryString.Item("ArvDate")
If strPar = "" Then strPar = DateTime.Now.ToString("d") [code]....

I just don't know the syntax to get it in that SQL Select statement

View 2 Replies

Forms Data Controls :: Pass Value To Gridview Parameter?

Sep 3, 2010

I have grid view and i want to pass parameter value for it from where clause...

my parameter value is not control, or session or cookie.its a variable can i pass this variable to grid view parameter?

View 6 Replies

Forms Data Controls :: Select From Gridview - View In Another Gridview?

Oct 28, 2010

select from gridview, view in another gridview

View 7 Replies

Forms Data Controls :: How To Contain In Second Parameter Of GridView's RowCreated Event

Jun 7, 2010

When a gridview is rendered, its RowCreated event is called. When it is called, what is contained in the second parameter which is of type System.Web.UI.WebControls.GridViewRowEventArgs ?Means, which type of information can we get from that ?

View 2 Replies

Forms Data Controls :: Getting The Url Parameter And Link In Gridview Asp:HyperLinkField?

Jun 1, 2010

here's my url: http://nathan/mail/incomingmail.aspx?dc=8250&bg=-617370170

gridview code:

<asp:GridView ID="GridView1" runat="server" AllowPaging="True" AutoGenerateColumns="False"
BackColor="White" BorderColor="#DEDFDE" BorderStyle="None" BorderWidth="1px"
CellPadding="4" DataSourceID="SqlDataSource1" [code]...

View 1 Replies

Forms Data Controls :: Multiple Parameter To Filter Gridview

Nov 21, 2010

In my application i need to filter a gridview using four or five parameter.

View 3 Replies

Forms Data Controls :: Dropdownlist In Gridview Gives Parameter Error?

Jan 23, 2011

I have a gridview with some text-box columns and one dropdownlist-column (Templatefield).

With the dropdownlist i wan't to be able to edit a cell in a row. I have read a lot on the web and i have folowing code. I only get a parameter error now, before i added the dropdownlist everything was ok.

This is my html:


This is my update-command in the class "TransactiesDAO"


Look at the line:


in the aspx code. I don't now what to type in the "Bind(...)" text.

With above i get error: Message=DataBinding: 'System.Data.DataRowView' does not contain a property with the name 'Subrubriek'. when trying to update the row.

When i delete the line "SelectedValue=" then i get folowing error:

It gives me folowing error:

'ObjectDataSource1' could not find a non-generic method 'UpdateTransactie' that
has parameters: Rekening, Omschrijving1, Omschrijving2, Boekdatum, BedragBij,
BedragAf, Subrubriek, @ID_SR, ID

View 4 Replies

Copyrights 2005-15, All rights reserved