Can you use two way data binding with a checkbox control ?
For instance :
[Code]....
I am using the control in a formview control in the insert and edit templates.
I have a couple of Checkbox controls in the Item Template of a Repeater and am trying to set them (checked or not) based on an underlying data value. With Labels the <%# Bind... > syntax can be used but there does not seem to be an equivelent for a Checkbox.
So I have moved into the code, specifically the ItemDataBound handler of the Repeater control but cannot seem to instantiate the Checkbox controls.
In the handler repProjectList_ItemDataBound(object sender, RepeaterItemEventArgs e) I can instantiate the Repeater by casting sender or the RepeaterItem by using e.item and both have FindControl() methods but neither seem to find my Checkbox.
Further, once I am able to 'find' the Checkbox, I'm not sure how to reference the various values in the underlying data source.
i have a database of values that I am rendering in a table via the repeater control. (Previously I was using a gridview but I know require a repeater) I have a checkbox being 'repeated' for each record and I can get the id of each row to do some logic, but what I cannot get is whether it is checked or not as the value is null. As the database has no null values, I can only asume it is not binding for the checkboxes as current true values do not have a check in the box. The onCheckedChanged event carries out the logic required to change whether record is disabled via the database. With a gridview
Checked='<%# Bind ("Disabled")%>' was enough
<td
class="GridCentre"[code]....
is this done with the itemdatabound event? and how is it done?
bind Checkbox in Details view?
[Code]....
<EditItemTemplate>
I have a details view in asp.net which I am dynamically replacing some of the controls using code behind (e.g. converting some text boxes to dropdowns). My problem is that I am unsure how to bind these to the field from the database on postback. I.e. I am trying to find the code behind equivalent bind('currency');
I can populate the dropdown with the current value from the database but cannot find how to save a new value on updating the detailsview.
I'm a bit of an ASP.NET newbie and I am creating a data table in memory and binding this to a gridview control. The code is as follows:
Dim DstBasket As New DataSet, TblBasket As New DataTable
With TblBasket
.Columns.Add("BskPrdCd", System.Type.GetType("System.String"))
.Columns.Add("BskPrdDesc", System.Type.GetType("System.String"))
.Columns.Add("BskQty", System.Type.GetType("System.Int16"))
.LoadDataRow(Split("12345,Test product 1,1", ","), True)
.LoadDataRow(Split("122,Test product 2,2", ","), True)
.LoadDataRow(Split("123A,Test product 3,5", ","), True)
.LoadDataRow(Split("44,Test product 4,1", ","), True)
End With
DstBasket.Tables.Add(TblBasket)
With LfnGridView("GdvBasket")
.DataSource = DstBasket
.DataBind()
End With
The data displays in the gridview control fine with both edit & delete options but when I attempt to delete, it has no effect. How do I force removal of the relevant row from both gridview and table? Most of the documentation I have unearthed shows how to achieve this when connected to a SQL table which is clearly not the case here.
Here is data binding expression (dropdown list is nested in gridview)
[Code]....
Code Behind has function which looks like
[Code]....
The whole reason for passing the reference is to save round trip to database and not to use SESSION
how to use an sp to bind the datagrid.
View 3 RepliesScenario:
I am creating a custom gridview control which has a custom CheckBoxTemplateField column (deriving from TemplateField class). This template field column has custom Checkboxheadertemplate (implementing ITemplate) and CheckboxItemTemplate (also implementing ITemplate). In InstantiateIn method of both templates (header as well as Item template), I am adding a checkbox control which has Autopostback = true.
My requirement is:
I want to mark all the values in the binding column of datasource if checkbox in headertemplate is checked. I dont want to mark only rows visible on grid. I WANT TO MARK ALL ROWS IN DATASOURCE. I want to do this in _CheckedChanged event of checkbox in header template.
Problem I am facing: When I check/uncheck the checkbox in header, it postbacks. so in OnCheckedChanged event, gridview's datasource is null. Secondly, in any event of gridview, I could access only those rows of datasource for which corresponding rows are visible in gridview through Gridviewrow.DataItem property. But I want to set it for all rows in datasource.
I am trying to bind upto 3 values to a HyperLink control in a DetailView control to create a query string but it does not seem to work.
Following is my code for the HyperLink:
[Code]....
The parameters UserName, FirstName and LastName are column names from the sqldatasource.
I have a checkbox in a repeater control. How to get the User,Administrator,Security Admin as the checkbox Names ?
private string[] AvailableRoles = { "User", "Administrator", "Security Admin" };
Repeater_Roles.DataSource = AvailableRoles; Repeater_Roles.DataBind();
[code]....
i have a gridview control i added checkbox contrl dynamically but i am not getiing the reference of checkbox in button clilck event here is my code Gridvew
[Code]....
.vb code
[Code]....
i want to replace the control after binding like suppose i bind a gridview with the edit button . when i press the edit button all field are come as a textbox control. i replace this textbox to another control how to do this.
View 2 RepliesMy TreeView controls is rendering CheckBoxes on Leaf nodes. I want to bind to those nodes the ID of the underlying data item. I am not sure I can do this declaratively or if I need to hook up to the TreeNodeDataBound event. If the latter, how would I go about achieving this?
View 3 Replies I have a DevExpress WebChart Control that binds to a DataTable. The chart control renders fine from the DataTable until I try to import data from a details view(i think the chart control renders before the detailsview?).
Here is three renderings.
Chart 1. just rendering from the datatable
Chart 2 The sqldatasource gets its para. from the values of two label controls to render the detailsview. The detailsview renders fine
Chart 3, the problem comes in when I try to extract the values from the DetailsView to populate the Chart, I loose the value. I am assuming the the datatable is built before the rendering of the detailsview? Lost at this point.
ASPx Code with SQLDataSource1, 2, 3
[Code]....
VB Code Behind
[Code]....
I have a form in which I have a dropdown list and a list box.
This dropdownlist is populated by a column in thetable . This drop down list may have values ranging from 1 to 5.
This values in the dropdownlist are to be made the caption headings of the list view control.
For insance if there are three values in the dropdown there should be three columns in the list box with the heading as the values of the dropdownlist.for 5 it should be 5.
Also there are two additional columns which would be constant.
I want to bind data from database to Dynamic Grid-view Control with textbox and dropdown using dataset.
I have successfully inserted data to database using this code but now i want to fetch inserted data to same grud view control. i have tried following code. but not getting ans.
SetInitialRow();
string ID = 101;
foreach (GridViewRow row in Gridview2.Rows) {
string str1 = "Select * from VendorInvoiceDetails where Invoice_ID='" + ID + "'";
DataSet ds1 = GEN.GetDataByQuery(str1);
[Code] ....
I want to have a form that will display check boxes whose label is dervied from a databse or via an xml based service. I figure repeater would be the way to go. I want to display 5 check box per row and need to have paging .what is the best way to go about this?sample of what i am trying to achievehttp://i54.tinypic.com/2nvfqty.jpg
View 14 RepliesI don't know what I'm doing wrong but for some reason I'm not able to maintain the index selected value on the listview that I've created within a user control. In a user control I have added a listview. I have exposed the handler, Datasource and DataKeyName. I have populated the datasource of the listview by using the following:
MYLIstView.aspx.cs - user control
[Code]....
I have a listbox control that is used to insert and update data. There is a checkbox that some users should be able to set while others should not. In what event shold I set it's enabled property and what would the findcontrol string look like?
View 2 RepliesI have a gridview control
i add template column dynamically to gridview
like this in a function in AddColumns button clickevent
gv.Columns.Clear()
Dim chkCol As New TemplateField
chkCol.ItemStyle.Width = 20
chkCol.ItemStyle.HorizontalAlign = HorizontalAlign.Center
gv.Columns.Add(chkCol)
2)
and in row databound event i added checkbox control to this template field. like this
Protected Sub gv_RowDataBound(ByVal sender As Object, ByVal e As System.Web.UI.WebControls.GridViewRowEventArgs) Handles gv.RowDataBound
If e.Row.RowType = DataControlRowType.DataRow Then
Dim chkbox As New CheckBox
chkbox.ID = "chkSelect"
e.Row.Cells(0).Controls.Add(chkbox)
End If
End Sub
HERE I WANT TO GET CHEKC BOX IN btnok click event
Protected Sub btnOk_Click(ByVal sender As Object, ByVal e As System.EventArgs) Handles btnOk.Click
Dim linkId As String
Dim summary As String = ""
'Enumerate the GridViewRows
For index As Integer = 0 To Me.gv.Rows.Count - 1
'Programmatically access the CheckBox from the TemplateField
Dim cb As CheckBox = CType(gv.Rows(index).Cells(0).FindControl("chkSelect"), CheckBox)
If cb IsNot Nothing Then
If cb.Checked Then
linkId = Me.gv.DataKeys(index).Value
End If
End If
Next
Me.Page.Title = linkId
End Sub
But here i am not getting Check box even i used find control. how i get checkbox
I need to bind a List control based on the Gridview Row's datakeyName value while the Gridview control is being loaded into the page. I tried the following but it does not work.The BulletedList control is nested inside a Gridview Control and they both bound to an ObjectDataSource control. In my code, I passed teh UserID into the UserID parameter and call the Select() method but still does not work. Basically, I want to list of a user's hobbies, therefore the hobbies control are driven by the userID. tell me how can I get it to work?
protected void UserGridView_RowDataBound(object sender, GridViewRowEventArgs e)
{
int UserID;
[code]...
I have a gridview with checkboxes
<asp:GridView ID="gv" runat="server" DataKeyNames="Id" AllowSorting="True"
AutoGenerateColumns="false">
<Columns>
<asp:TemplateField >
<ItemTemplate>
<asp:CheckBox ID="chk" runat="server" />
</ItemTemplate>
</asp:TemplateField>
<asp:BoundField DataField="System_Date" HeaderText="System Date" />
</Columns>
</asp:GridView>
in button click event how to find checkbox control and delete selected row from gridview i binded gridview with datatable
i'm attempting to set regular html checkbox's checked value based on if a master asp checkbox is checked or unchecked. The normal html checkbox is located in an asp repeater control that is populated in the page load event.
MAIN .ASPX PAGE
<asp:CheckBox ID="ChkMaster" runat="server" OnCheckedChanged="ChkMaster_CheckedChanged" AutoPostBack="true" />
[code]...
I have One DataTable like
Region Q1 Q2 Q3 Q4
Rg1 15 25 35 40
Rg2 42 78 35 98
...........................................
I Want To show Grpah Like this
private void btnGraph_Click(object sender, EventArgs e)
{
this.gridshowComapre.Visible = false;
this.chartComapre.Visible = true;
this.chartComapre.DataSource = dtreportnew;
[Code] .....
but My chart is displaying only 1st Rows Data