So, I'm trying to use form view in insert mode on a dedicated aspx page. So when a user clicks "Add New" from the main GridView page, it will take the user to an Insert.aspx page that will be in Insert mode ready to collect information.
Here's what I have so far, and all I get is a blank page when I try to run it.
[code]....
I have a FormView at the very bottom of the page in insert/edit mode. When I click insert/update button, the whole page reload and the pointer does not keep within the Formview but go to the very top of the page far away from the desired FormView.
What can I do here to prevent cursor going outside the Formview ? Is it I can use update panel ? What and where I should use the tags ? Or there are other better way ?
I have a gridview on Contacts.aspx. From this page, I want an "Add New Contact" ImageButton to open the Formview in the ContactDetails.aspx page in Insert mode....
I'm in VB2010 in C#
I use GridView & FormView to update a record. but when I click the "save" button, throw an except : FormView must be in the insert mode to insert a record. The record has been updated success, and I didn't change the mode of the FormView, how this error comes?
View 3 RepliesFormview1 datasource ID is SQLTest. When I click New on the form and go into insertmode, is there an easy way to auto file textboxID to the value of the NextIDNumber field ( field 9) from SQLTest datasource?
View 3 RepliesI have a FormView with default mode set to "Edit". When I click the Update after making changes the form reopens in the Insert mode.
<asp:FormView
ID="FormView2"
runat="server"
CellPadding="4"
DataKeyNames="ID"
DataSourceID="SqlDataSource3"
DefaultMode="Edit"
EnableModelValidation="True"
Font-Names="Calibri"
Font-Size="9pt"
ForeColor="#FFFFFF"
Height="600px"
Width="1000px"
onitemupdated="FormView2_ItemUpdated"> What am I doing wrong
I created a formview that I am using for data input (DefaultMode=Insert)
One of the objects I have is a text box (see below)
[code]....
When I click submit I get a message that I cannot insert a Null into the field IntershipNumAvailable. This makes sense since I made this field a required field in the database.
How do I get the form to recognize that the user selected item is the one I want to write to the database?
What changes do I need to make here? Do I need to make changes to my parameter list?
I need to Check a formview for records on page load and if empty, I need to set it to edit mode.
View 1 Replieshave a WebForm with a Form View to insert new items in my database.These items that i will insert also are conected to other many-to-many relations that i also wanna add after my new item is inserted.For Example: With the classic Autors-Books data base (autors with many books each books with many autors), i want a FormView that for defoult enter to the InsertMode where you will add a new Autor with name, age, style, etc... After you insert this new autor i wanna show the details of this autor but also his books (when new this table will be empty) and below that table i want a button that says "Add a new book to this autor"
View 1 RepliesWhen a FormView control is in insert mode, a data entry form is shown where the user will type a value into each textbox corresponding to a table column.
How do I disable data entry for one of these textboxes and instead, assign a system-calculated value to that text box?
i want my gridView to be refreshed so i can vies the new records when i insert to formview.
Now i have to go to another address and back to se the updated record.
i cant even press f5 because then it just duplicates the record with the same text from the formview even if the fields in the formview are empty.
There is got to be a code for this!?
This is what i have using VS and VB: formview that is bound to a sqldatasource. In the formview i set up three panels and the visibilty is controlled by three buttons. I want to be able to click the edit link button and have the panel that is visible in readonly mode be the one visible in editmode
View 6 RepliesI have created a FormView whose defaultmode = "insert". When loaded the FormView displays the InsertItemTemplate. At the top of the page is a DropDownList used to select Clients. I have added a list Item to the DropDownList with value = "0" and text= "Select Client" option. So the Page is in Insert Mode. SO FAR EVERYTHING IS AS EXPECTED.
When I select a Client from the DropDownList, the page remains in Insert Mode (Don't understand why? ) Could it be the default Mode setting? So I added the following vb code.
Protected Sub ddlSelectClient_SelectedIndexChanged(ByVal sender As Object, ByVal e As System.EventArgs) Handles ddlSelectClient.SelectedIndexChanged
If ddlSelectClient.Text <> "(Select Client)" Then
If FormView1.CurrentMode = FormViewMode.Insert Then
FormView1.ChangeMode(FormViewMode.Edit)
End If
End If
End Sub
So after an existing Client is selected, the FormView Mode should be changed to EDIT. AND INDEED THE EDIT ITEM TEMPLATE IS DISPLAYED.
Ah but life is not so simple (after all this is a Microsoft Application). So I enter data in some fields and click the [Update] Button.
Then I get the following message:
FormView 'FormView1' must be in edit mode to update a record.
THe FormView displays the Edit Template, the Update and Cancel Buttons are displayed. All this should mean I am in edit mode.
Just call me FrankenSoft !@#$%^^& or is it MicroStein?
Oh by the way I'm using Linq to SQL data sourcess. Should I be? I'm having a lot of problems with the FormView using Linq.
I have created a simple dataset with my ObjcetDataSource to my SQL table named Invoices and a new FormView. My form inserts are working 100% correctly, however after some testing i noticed the insert happens again if i hit the refresh button on my browser after an initial insert. I am currently submitting the form back to itself with a success/fail message returned on the page so that the user can keep inserting more records if they choose. This is done in my Inserted behaviour.
In my ObjectDataSource_Inserting code i am setting the values of a date prior to my insert. How do i stop a second INSERT from happening when the user refreshes the browser? I thought it was what IsPostBack was used for? Here is my code:
[Code]....
I'm trying execute code only when FormView is in Edit mode ---but the code following line this is being executed even in read-only mode.
If formname.CurrentMode
= FormViewMode.Edit
Then
there are 2 pages (SummaryGridviewPage.aspx and FormviewPage.aspx) there are insert, item and update templates in the FormviewPage 1st case - there is no problem to insert new record, select and update action in the FormviewPage
2nd case - However, there is problem when i select a record in GV and direct to FormviewPage for edit this code is added in Formviewpage to open the record at readonly mode, no problem
Private Sub RF_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
If Session("RecordID") <> "" Then ' to check New or Old record
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.ChangeMode(FormViewMode.ReadOnly)
End If
End Sub
however, no record if go further from readonly to edit mode then Code is added to the Edit button
Protected Sub BtnEdit_Click(ByVal sender As Object, ByVal e As EventArgs)
FormViewProject.ChangeMode(FormViewMode.Edit)
SqlDataSourceRF.SelectParameters.Item("New_ID").DefaultValue = Session("RecordID")
FormViewProject.DataBind()
End Sub
Now edit problem is solved but when go back to the 1st case (new record, and then edit) Now new record can be inserted, and then show it in readonly mode. but then try to go to edit mode, no record show i think BtnEdit_Click code is conflicted with the built-in "Edit" command Could anyone show me some info how formview retrieve specific record in a proper way?
can I change a formview's mode (edit mode, insert mode, etc) client side?
I have a html image that once clicked should change a formview's mode.
I have a combobox that is used as a control for Formview, so when the user selects a name from the combobox the data in formview displays in edit mode. However, some if the data that is displayed in formview needs to be empty. For example if the Date is being pulled in, it needs to be empty or null in edit mode.
View 4 RepliesI've been spending two days on this. My page formview is in a tab container and I need it to update, insert and display data. Insert and display are ok as long as the default mode is Insert. The problem here is edit mode, it's able to get values from the db(oracle) and display them in edit mode, but when I click save, any values I typed out on the textboxes do not get captured. When I call on my db update class, it just sends old db values. Here is the process: formview shows data selected from gridview, then an update button is clicked to edit the data. there is also a SAVE button to send updated data to db. Example: description textbox = "test", then I type out a different value, and in debug mode, the textbox.text still shows "test" after clicking save.
[Code]....
[Code]....
How to refer to a control (label) which is on a Formview (in Edit mode). The formview is on a Multiview...
View 3 RepliesI'm having a hard time solving what should (I think) be an easy problem. I have a formview defaulting to Editmode. One of my data fields is a binary image. How can I change the editItem template to allow a user to upload a new image into the binary image field?
View 2 RepliesThe following code successfully displays a record in a FormView and sets the FormView mode to 'Edit' when the user clicks on a LinkButton within a Repeater, however the record is not Updated. If I don't change the .SelectCommand and call .DataBind, I'm able to update the first record that is displayed. Naturally that's a moot point because the idea is to be able to update the record that the user selects in the Repeater.Because of the design of the FormView and Repeater, the record *must* be updated via the FormView. Updating the record via the Repeater is not an option.
[Code]....
In web config file I have add key values specified.
In the formview I have labels on edit , item and insert mode that I want to display all the time by getting those values from web config. I'm able to do that with no problem but when I change the modes between edit to insert or item view, I lose those label values until I hit the "select" twice from the Gridview, those values re-appear. Below is the snippet of the code. What do I need to do to retain the category values all the time?
[Code]....
[Code]....
I am simply trying to get a querystring value and pass it to a textbox in a formview with the default view set to edit mode.
Protected Sub fv_Detach_Engine_DataBound(ByVal sender As Object, ByVal e As EventArgs) Handles fv_Detach_Engine.DataBound
If fv_Detach_Engine.CurrentMode = FormViewMode.Edit Then
Dim tbx_IDProfileAccount As TextBox = TryCast(fv_Detach_Engine.FindControl("tbx_IDProfileAccount"), TextBox)
If tbx_IDProfileAccount Is Nothing Then
tbx_IDProfileAccount.Text = Request.QueryString("IDProfileAccount")
End If
End If
End Sub
I have a table in my database called "Profiles". This holds data on Female and Male personal characteristics.On my aspx, I have a formview in edit mode which is binded to an object data source with a GetDataByUserId Select methodwhich retrieves data from the "Profiles" Table via a DAL.The "Profiles" table has some columns which relates to females only and some just males and some are generic to both.See example below
UserId - / of Type GUID
GenreId / of Type BOOL.
Hip Size (For females)
Dress Size ( For Females)
ChestSize (For Men )
TrouserSize (For Men)
Weight ( For both )
When the User logs in , they go to an update Page which has the Formview in Edit Item Mode and contains drop down Lists whichare binded to the Users Selected Value. The DDL are in turn bound to their related table such as HIP, Dress, Chest, Trouser etc.bjectiveIf a female user logs in I just want to show them the (Hip Size) DDL and DressSizeDDL in the Edit item template of the formview and not the ChestSize DDL or TrouserSize DDL.At present the GetProfileByUserId returns all colums from the tableMy question is how do I do this and just show DDL which are relevant to the Female or Male Only. In some cases the usermay not have selected an item in the previous form so they could also be NULL.Am i on the right path by writing a Select Query that checks to see if the User is Male or Female by checking the Genre column in Profiles first.Do I also need 2 panels, 1 to hide Female DDLS and the other to Hide MaleDDLs subject to logged in user genre.
