My dropdown boxes in my GridView just show the top item in the list when I select edit.
[Code]....
Do I need to do something in the CS file to make these show the selected value when you hit edit?
i have a grid view and check box in it. and there are 5 columns in it. user name, first name, lastname city and ph no. and 5 text boxes... and a edit button NOW when i check any checkbox and press EDIT button i want the entries in grid view show be entered into text boxes.
View 10 RepliesIn vs2008 and sql2005, I want to edit gridview..
In edit template I want a dropdownlist that must show that row's cell's value as the first value and remaing values should come down in the dropdown.
Example for Editable Grid with dropdownlist inside? Getting some problem in updating the data
View 3 RepliesUsing a gridview with paging, sorting, inline editing, and selection enabled. I noticed the following:1. after selecting a row, then sorting, the selection sticks to the position in the grid, rather than the actual data. I would have expected it to either stick with the data, or clear the selection so nothing is selected. I would just assume clear the selection rather than have it actually change, like it is now. When a row is selected, I'm showing detail information about that specific row below the grid, so when a user does this, then sorts, the selected row changes and the new selected row's detail info shows below the grid. How should I go about stopping this? Hook into the gridview's Sorting event and set the selected row back to -1 (for nothing selected)? I assume that would work but I was compelled to post anyway to see if there is something else I should be doing...
2. I have not tested yet, but I assume the same thing would happen when paging occurs?3. another issue I'm having is when a user enters into edit mode for a row. This also does not clear a previous selection, so if a user had first selected a row, which shows the detail info for that row below the grid, then they hit the edit button for a different row, now on screen at the same time is a selected row (visible by selectedRowStyle), it's detail info below, and a completely different row in edit mode... this is a very confusing scenario for a user. I either need to ensure that any selection is cleared once in edit mode, OR sync these up so that the row in 'edit' mode also becomes the selected row... what do you guys/gals normally do for this situation? I'm thinking syncing up so that the row in edit mode is also selected sounds preferable... how would I do that?
I have a gridview and users would select some records and would click on the submit button and i will be saving those records into database using a stored proc.... now .... just below the gridview and above the submit button there are few checkboxes by default they wud be checked. How would i save the selected values and the checked boxes in database i wrote the stored proc for the gridview but how would i save the checked checkboxes into the same table.
For i As Integer = 0 To gvSelectScreen.Rows.Count - 1
Dim chkTemp As CheckBox = TryCast(gvSelectScreen.Rows(i).FindControl("cbStatus"), CheckBox)
If chkTemp.Checked Then
ContractNumber = gvSelectScreen.Rows(i).Cells(0).Text
ClientProgramNumber = gvSelectScreen.Rows(i).Cells(1).Text
ClientProgramName = gvSelectScreen.Rows(i).Cells(2).Text
StartDate = CType(gvSelectScreen.Rows(i).FindControl("txtStartDate"), TextBox).Text
EndDate = gvSelectScreen.Rows(i).Cells(5).Text
Dim connStr As String = ConfigurationManager.ConnectionStrings("MainConnectionString").ConnectionString
Dim myCon As New SqlConnection(connStr)
Dim cmd As New SqlCommand("usp_ParametersFromGrid")
Dim dt As New DataTable
cmd.CommandType = CommandType.StoredProcedure
cmd.Parameters.Add("@ContractNumber", SqlDbType.VarChar, 22).Value = ContractNumber.ToString()
cmd.Parameters.Add("@ClientProgramNumber", SqlDbType.VarChar, 22).Value = ClientProgramNumber.ToString()
cmd.Parameters.Add("@ClientProgramName", SqlDbType.VarChar, 100).Value = ClientProgramName.ToString()
cmd.Parameters.Add("@StartDate", SqlDbType.VarChar, 20).Value = StartDate.ToString()
cmd.Parameters.Add("@EndDate", SqlDbType.VarChar, 20).Value = EndDate.ToString()
cmd.Parameters.Add("@RequestID", SqlDbType.VarChar, 50).Value = RequestID.ToString()
cmd.Connection = myCon
myCon.Open()
cmd.ExecuteNonQuery()
myCon.Close()
End If
Now above the submit button as i said, there are few checkboxes and they are checked by default...how would i save the selected item (in the gridview and the checked checkbox values in the same row in the database(sql server)
I have one repeater on page which has his own sql data source. I've placed 2 dropdown lists on the page. The repeater has jQuery DataTable plugin. With 2 dropdownlist I wish to change the sql stored procedures so when each will be selected the data in repeater will change. When user select the first there will be only data (users) according to selected item and in the second the same. I wrote 2 simple functions for changing stored procedure of repeater and rebiding it. Everything works but when I try the second one and then the first I always get warning about error "Procedure or function .... has too many arguments specified".
I think that when I select the first one the second function is still called although I don't call it.
[Code]....
I have a gridview with dropdown boxes. As soon as the complete gridview is databound, I want to loop through ALL the rows and set the values of the dropdown boxe in a row based on the value of another column in the same row. The gridview is databound, all data shows up. The condition "If ddl.Items(j).Value = searchstring Then" evaluates as true, but somehow the selected item in the dropdownbox is NOT changed and remains "<ignore>"
[Code]....
how I get the selectedvalue of a dropdown list in a gridview?
cmdInsert.Parameters("@Cost_ID").Value = gvItems.Rows(i).Cells(0).FindControl("ddCostID").
[Code]....
I got one web page which is developed by using Asp.net. and in that page I have got one tab control which developed by using Ajax control toolkit (tab container). In that tab container i have got three tab pannels. In the first tab pannel have got two drop down list boxes and one image control box. wat I was trying to do is that by using calendar extender control in ajax control toolkit i was trying to display a day in the first drop down list box and month and year in second drop down list box. when user click on image control during run time a small calender will pops up and then user will select the propective date according to there choice and when they have finish selecting the date from the calender a day will display on first drop down list box and month and year will display on second drop down list box.
I was keep trying to do that but i was failed. then i took one test box from the toolbox and i was got success in displaying the user selected date in the text box by using ajax calender extender. How to display that date instead of one textbox into two separate drop down list boxes from which a user can select manual date from drop down list as well and from the calendar as well also when the page loads, the two drop down list boxes must show current date ( by default)
I have the following structure 3 Dropdown Boxes, the 2nd and 3rd dependant on the 1st and when I change the first combo the pages refreshes with error I am assuming it's happening when posting back. I have nothing in my code behind file for this page so far.
Databinding methods such as Eval(), XPath(), and Bind() can only be used in the context of a databound control.
This is a very Basic application that I am creating using Visual Basic and ASP.Net 3.5. Am using a SQL Datasource have searched for this error some of the answers seem extremely complex and I can't figure them out, surely a simple tasks like this has to be easy to bind back to the database from several drop down lists.
I am developing page for maintaing employee record using Visual Studio 2008, MS SQL server 2005. I am able to fetch and display all the employee information in gridview, the gridview have the dropdown list to display the employee type [ Part Time, Full Time, Permanent , Contract ], in the item template i am having dropdown list. IN the dropdown list i am displaying this. But While saving the record in gridview the droppdown selected index are changed to 0 of other dropdown list.
the user may be change the dropdown value from permanent to contract, or so. but while click on the save button in gridview, all the previous selection are gone, and always showing the first record of dropdown list. I know this is happening because we are doing dropdown list bind on onRowDataBound.
I have a gridview that had a field called "GenericNameHepDrug" within the row. It's not the key field. I have an insert button that opens a formview in insertmode. How can I get the selected value of generichepdrug into the formview that opens when the button is clicked? I am using VB.NET 2.0.
here is some code from the source:
[Code]....
Here is what I tried to do in the code nehind of the button3_click:
[Code]....
[Code]....
CLearly I am lost. I have been working with ASP.NET VB for 2 months. I'm in over my head with figuring this one out - I've been at it for days.
i am making a web page in which there is a dropdown list and a text box.i want to display the selected item in dropdown and textbox in a Gridview.
View 1 RepliesI have a drop down which contain dealer name..i want to do when i select name in dropdown it show releated item list how we can perform.
View 1 RepliesIn my query i have 1 gridview..
In this gridview i have 1 dropdownlist and 1 textbox..
textbox is in visible=false state..
My question is after selecting dropdown list selected value i want visible textbox in gridview..
I want to display the selected value from gridview in a dropdownlist.Here I am not getting the Dropdown from Database as it contains two values.After getting the data user can modify the DDL and change the selection.The data type where the values are saved is declared as Bit.
<asp:Label ID="lblQuery" CssClass="labelbold" runat="server" Text="Query"></asp:Label>
<asp:TextBox ID="txtQuery" runat="server"></asp:TextBox>
<asp:Label ID="lblStatus" CssClass="labelbold" runat="server" Text="Active Status"></asp:Label>
<asp:DropDownList ID="ddlStatus" runat="server">
<asp:ListItem>--Select--</asp:ListItem>
[code]....
Till here it works fine how do I fill the dropdown from database.Eg Active text is coming from Database,so DDL should show Active along with Inactive value.
How to show Gridview selected row in popup using Jquery asp.net 2010
View 1 RepliesI have two dropdown list boxes I select the first one and I get the index value of what i selected say item number 2,Using that indexvalue I would like to acccess the second dropdown box and get the value of it Both boxes will have the same amount of items in it.
View 4 Repliesthis is with ref & continuation of post [URL]
in which day drop is dynamicalluy populated at run time based on the month selected
the values selected are stored in the database.
suppose the user selects NOV 22 of the current year
when the user want to rertive the same stored data i need NOV in month dropdown & 22 in day dropdown
i get the month correctly but day dropdown is balnk
i have a dropdown with month names if the user has data for the month tht is selected then gridview displays the rows with day nos as per the month but if the gridview has no data for the same the dropdown or gridview via some event should call a insert procedure to insert data into the table for tht month with daynos ad rebind the gridview witht the rows just created
View 6 RepliesI have a nested gridview dynamically added. It seems I resolved all issues with the loading this control on a parent page along with other controls and I can trigger the edit of the first level - the master part of the gridview. However, I cannot trigger the edit on a child gridview.
OnRowEditing="grdChildGridEdit_RowEditing"
The master and the child gridviews have objectdatasources in a markup but I have to do the additional data binding after the loading the control on the parent page (see the code below). I'm doing that additional data binding only for the master gridview that is working fine and shows the data for the master and the child gridviews. When I click the Edit button on the master gridview it shows text boxes for the editing but when I click the Edit button on the child gridview it's doing nothing and moreover the editing mode for the master gridview is going back to the initial stage (labels).
I was trying to trigger it throughuse the registering the event:
[code]....
have created a gridview with input text boxes inside which can be added by the user.
So in order to populate the gridview on form load I use grdView.DataSource = PopulateDT(); this.grdView.DataBind();
Now is there a neat way of retriving the data content after the user has entered data from the gridview and store as a datatable. The only way is doing a for next loop which i think its time wasting.
I have a gridview. The gridview contains multiple dropdownlist boxes.Two of the dropdownlist boxes work together.Dropdownlist 1 called cmbLocations & Dropdownlist 2 called cmbSubLocations. On first load of the gridview the data is bound to the gridview.When 'Edit' is selected, the dropdownlist boxes are filled with their appropriate datasource (BindLocation)for the first dropdownlist and BindSubLocation for the second. HOWEVER, BindSubLocation, does not yet work, because the query that produces the data has a parameter. This parameter is the datavalue of the first dropdownlist box. (see routine below sample gridview).
Question: How can I get the datavaluefield (LocId) from the the first dropdownlist to feed the second?
see below how they look in gridview:
[Code]....
The sublocation bind routine:
[Code]....
I have a gridview where i have two fields. one is product and second is sub category.
I need to do 2 things.
1. I need to populate the two combos from the database. But depending what is selected in dropdown 1 this will determine what needs to be populated in drop down 2?
how can i achieve this?
