How can I get pass the DataKey of a GridView to a usercontol, preferably without code behind.
Why doesn't this work:
<ucOrderDetails:AJAX_OrderDetail ID="od1" runat="server" OrderNumber='<%# GridView1.SelectedValue.ToString() %>' />
GridView1 is just a list of orders with a DataKey of OrderNumber.
od1 is not inside of a databout control, does it need to be?
I have a web form, and an "add vendor" button. Click the button, a modal dialog pops up (ajax:ModalPopupExtender). User selects one of two radio buttons which shows a data bound asp:View in an update panel - this view is data bound to a single row and must be populated by the user. However I also want to provide a cancel button which should close the modal dialog and reset the bound view.
However what is happening is that the ModalExtender closes, but when the "add vendor" button is presented again, it's still bound to the same data. Do I need to clear my data source? How so I reset the forms/views so that when the 'add vendor' button is clicked again the form is presented as it should be (IE the 2 select options, picking one re-binds the asp:View)?
I have a gridview inside a user control bind to an object datasource. Now I want to bind the object datasource with a parameter from parent page.
For this purpose I defined a public property in user control but how do I pass it with object datasource ?
I am calling from parent page like
myusercontrol.parameter=querystring["id"];
How to bind object datasource with my parameter ?
What is the best way to create a data bound ASP.NET user control? I have a user control that contains a drop down list and three label controls. I would like to data bind the drop down list, and have the label controls display different properties of the data source. I have Googled for an example of IDataSource and User Control, but cannot find any good information. This must be a common use of a user control?
View 1 RepliesI have a ListView control that is bound to an SQLDataSource.
View 6 RepliesHow can I bind a datalist control with a list of objects. I have a list of objects that contain a name, desc, and url for menu commands that I am trying to show in a DataList. I am getting the list from a WCF service so I have a list called something like menuList which consists of a List<MenuCommands>. I then do a menuDataList.DataSource = menuList and then a menuList.DataBind but nothing is happening. What am I missing here? I need to use a DataList because I need the commands to be selectable.
View 11 Repliesis there a way to get the PropertyName of a data bound control? For example:
I have a text box like this:
[Code]....
How can I get the info that this text box is bound to the property with the name "Test"?
I've been using the Item Inserted event for my data controls, such as details view. I'm wondering if there are advantages to doing this with the data sources instead of the data control. There is a lot of overlap in the events provided by these two types of controls. Are there advantages to using the events raised by the data source instead of the ones raised by the data control itself. Should I be using the events raised by the data source instead of the control used to enter the data?
View 2 RepliesI need to develop a custom data-bound control which will contain, few text-boxes, drop-down lists, labels, and other standard web-server controls. And, I want to be able to load this control from a web page on button click. When the user enters any data to any of its child controls, i should be able to save, and also retrieve when the data-bound control is loaded again. Also, the data in the child control should retain their value on postback. What approach should i follow?
View 7 RepliesI have a situation where I currently have a HyperLinkColumn control that I would like to modify to have a Label or simple text appear in the same column as the hyperlink. I tried setting this in the ItemCreated event but encountered the following error message
View 3 RepliesI have a 3 level deep nested gridview. The expansion/contraction of each record was originally done with javascript. There were html <div> tags around each gridview. Since these were HTML div tags I could give them IDs that were dynamically bound to record ID value within the database. I then had onclick buttons that passed in a bound record ID value that coresponded to the appropriate div tag that needed to be expanded (e.g. display: inline (show it) or if it is already inline then display: none).
This worked beautifuly. Unfortunatley I wanted to be able to do in-girdview editing of the child records. When expands a parent record and clicks to edit a child record the OnRowEdit event fires which automatically generates a postback and resets the variables within the JavaScript. THEREFORE THE ENTIRE GRIDVIEW STATE BECOMES CONTRACTED.
So finally I decided to change the div tags to <asp: Panel> and the onclick images to .net clickable images (all .net objects no framework). This works because the state is remembered within each postback. However, the problem I'm having is I can't dynamically bind ID's for panel since this is not allowed. HOW CAN I GIVE THE PANEL <% Bind("id") %>. THAT I CAN REFER TO SO I CAN OPEN THE APPROPRIATE PANEL.
have two user controls on one aspx page. UC1 has a grid which contains a link button column which user clicks. Based on the value of clicked cell, I need to show some data into UC2.How do I pass data from UC1 to UC2? How do I invoke a function of UC2 from UC1?
View 2 RepliesHere is data binding expression (dropdown list is nested in gridview)
[Code]....
Code Behind has function which looks like
[Code]....
The whole reason for passing the reference is to save round trip to database and not to use SESSION
I have a page that deploys a user control to display an article. The page will show a different article depending on the ID parameter fed in via querystring, and there are many thousands of articles in our db. Here is the problem: I need to cache the user control to improve performance. But editors constantly need to go in and make changes/corrections, which they want to appear instantly on the site. Is it possible to clear the cache for a specific article only once it has been edited? ie for the request article.aspx?id=123? If so how would I do this? Otherwise, if the cache is cleared for all our content every time a single piece of content is edited, it will defeat the object of caching in the first place. I have tried using a cache key as recommended here: [URL] However, this apporach suffers from the drawback mentioned above. have also seen that you can set caching up to be cleared by changes to the db. However, the particular table concerned holds content for a number of other sites and would also have the same disadvantage.
View 5 RepliesI am doing a library application. I am using a formview control to display and edit the details of an existing borrower.
What I wish to do is to allow the user to enter the borrower barcode into a textbox and select the details of the borrower corresponding to the barcode.
At present I have kept the textbox and a button outside the formview. Once the user enters the barcode in the texbox and clicks the button, the data is displayed in the formview control.
Now, my doubt is that is there a way to keep the textbox inside the formview control itself and use the value(Which should be user input) for selecting the details?
i am new to asp.net and need some help with writing a user control that fits the following specification:
i have a list of properties. each property is a string triplet (type, name, value). TYPE can be "boolean", "string", "int" with VALUE taking appropriate values.
so a list of properties would look like: {("boolean", "isMember", "true"), ("int", "age", "39")} .
i need to display the list of properties in a table with a corresponding control for each value type
("boolean" in a CheckBox, "string" "int" in a TextBox)
and be able to to edit the values. I wrote a small control that displays a single property. It puts the NAME in a Label and depending on the TYPE inserts
the value in a TextBox or CheckBox and then puts that in a PlaceHolder. I could afterwards display the list in a table when a button is clicked.
I Have an InsertTemplat in FormView that has a DD List.
I also have an Insert Parameter in a SQLDataSource that tries to reference it but can't.
Is my only solution to use event code to move the data to the SQL Parameters?
[Code]....
I have a Formview ('formview1') with a pager. I also have a gridview ('gridview1') linked to a SQL datasource ('History'). I need to set the SelectParameter ('Serial') of the datasource to be the value of a field on the current page in the formview. The value i need to get is in the ItemTemplate and is a label called 'SerialNumberLabel'. So, something like:
<SelectParameters>
<asp:ControlParameter Text = "Eval fromview1.currentpage.itemtemplate.SerialNumberLabel" >
I also need to ensure that the SQL source and gridview rebind when the pager is activated.
How to use Control Parameter with SQLDataSource When FindControl is required?
[Code]....
Basically, the user Selects a row on GV that executes an Insert into a table the GV cell values of the selected row.
The SQL field data type is varchar. If the GV field is Null, the Insert adds the value to the SQL field. How do I keep the @nbsp; from being displayed in the cell of a data control when it is called at a later time? Do I add some more asp to my control parameter? do I add some vb code behind? Here are some relevant code snippets of existing code.
[Code]....
[Code]....
I want to move some parts of the html page containing this function to a new web user control. now "form1" is not defined and it is not working correctly without any error message!
admin.aspx:
Collapse |
Copy Code
I have the following function signuture:
public JsonResult PopulateGrid(int page, Guid? accountId, Guid? systemUserId, Guid? branchId, DateTime? fromDate, DateTime? toDate, HomeVisitType? homeVisitType)
Every single parameter is bound just fine except toDate which turns out to be always null. When inspecting the Request.QueryString["toDate"] it retrives the right value which is 30/09/2010. It seems that DateTime expects another format when binding.
What is the right format?
I have a user control which I call like this:
<MyNamespace:MyControl runAt="server" ID="foo" /> Is there any way I can determine the ID parameter at run-time and pass it in?
how to user control pass as parameter
View 2 RepliesHow can I build an user control that takes a list as a parameter, i.e:
<foo:TabMenu runat="server">
<Tabs>
<Tab Label="Tab1" PanelId="pnlTab1"/>
<Tab Label="Tab2" PanelId="pnlTab2"/>
<Tab Label="Tab3" PanelId="pnlTab3"/>
</Tabs>
</foo:TabMenu>