I want to know how can we send direct request to .DLL with some parameters. I really don't want to use .ASPX and .ASHX. I hope this .DLL request is used for more secure site.
For example: IRCTC (India Railway site):
[URL]
how we can send or execute page from .DLL in ASP.NET.
Session("CellNo") = New List(Of String)() From { _
"CellNo1", _
"CellNo2" _
}
Session("SMSMess") = New List(Of String)() From { _
"Messagetext1", _
"Messagetext2" _
}
' Popup window.
' Generate many iframes to send SMS.
Dim CellNo As List(Of String) = DirectCast(Session("CellNo"), List(Of String))
Dim SMSMess As List(Of String) = DirectCast(Session("SMSMess"), List(Of String))
For i As Integer = 0 To CellNo.Count - 1
Dim url As String = [URL]
?usr=USERID&pwd=PASSHERE&sndr=SENDERID&ph=" & CellNo(i).Trim() & "&text=" & SMSMess(i).Trim() & "&rpt=1"
Response.Write("<iframe frameborder=""0"" height=""1px"" width=""1px"" src=""" & url & """ />") Next
I'm using above Code to send SMS. For some reason I can't send SMS Directly as my web server doesn't allow to browsing other sites. But above code sending only 1 SMS.
it's possible to directly send a PDF mail from microsoft report, or automatically save PDF report on server.
View 1 RepliesI send programatically a request to remote server:
string xml = "SomeXML Data";
string url = @"http://someserver.com";
WebRequest request = WebRequest.Create(url);
request.Method = "Post";
request.ContentType = "text/xml";
//The encoding might have to be chaged based on requirement
UTF8Encoding encoder = new UTF8Encoding();
byte[] data = encoder.GetBytes(xml); //postbody is plain string of xml
request.ContentLength = data.Length;
Stream reqStream = request.GetRequestStream();
reqStream.Write(data, 0, data.Length);
reqStream.Close();
System.Net.WebResponse response = request.GetResponse();
System.IO.StreamReader reader = new System.IO.StreamReader(response.GetResponseStream());
string str = reader.ReadToEnd();
but this code throws error:
The remote server returned an error: (401) Unauthorized.
I know user/pass to authorize when IE ask me.
I'm having a problem with telerik RadGrid, I want to enable multiple row selection. I also want to go to the server whenever a row is selected or deselected. I created a javascript function to handle the Grid's client side events (OnRowSelected, and OnRowDeSelected). The functions look like this:
function onOperationRowSelected(sender, eventArgs) {
__doPostBack("<%=myControl.ClientID %>", "rowSelected:" + eventArgs.get_itemIndexHierarchical());
}
The other function is very similar, the only difference is that it sends the string "rowDeselcted" instead of "rowSelected".
On Page_Load I check to see if the request is a Post request using "IsPostBack" and if so, I check to see if it's a rowSelected or rowdeselected.
My problem is when I select a first raw on my grid, a Post request happens (which is expected), however, when I select the second row, a GET request is issued, which (obviously) will result in IsPostBack returning false.
What am I missing here?
I'm having difficulties to find a good explanation and tutorial on how to send an ajax request from one asp.net control (when clicking on an item in its )to update from the server another control.
Is UpdatePanel is the only solution- and does it really avoid a postback?
I'll be thankful for any useful link,
I have this wsdl file and here is how the requets look like.
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP-ENV:Header/>
<SOAP-ENV:Body>
<Request xmlns=http://www.sometest.com/ttt>
<UserDetails xmlns="">
<UserName>username</UserName>
<PassWord>password</PassWord>
<AsiakkaanViite/>
</UserDetails>
<DestDetails xmlns="">
<SearchNameAndAddress>
<Name>company name</Name>
</SearchNameAndAddress>
</DestDetails>
</Request>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
how i can code this in c# or send the request?
All I need is to send a http post request I pulled from fiddler.
I do not want to use HttpWebRequest class. It makes it hard to set up a request, does not allow to change host,
and when it does send it it looks nothing like the request I want. The server is very sensitive and unless I copy the request headers 100% it will return an empty page. Why can't I just type in the headers and send it that way? What would be 5 minutes of
work in php is taking the whole evening in asp.net.
This is what I am trying to send, simple as it gets: ...
how to send email when you submit a new request into the database.
View 6 Repliesi have some aspx page that handle form data submit from few websites. how can i retrieve the ip of the site (server) that send the request? (not the ip of the user that use the site and fill the form) if the form is hosted in server like 55.343.33.343 i need to retrieve to the handler page this ip. (Just to be clear : the handler.aspx is hosting in one server xx.xx.xxx.xx and the forms hosting in other servers cc.ccc.cc.cc, yy.yyy.yy.yy etc
View 8 RepliesI am trying to create a web service that can do the following functionality:
Request XML
[Code]....
How can I create web service to do this.
I'm working with asp.net c# web application. We have completed site and hosted in dedicated server (own server).
This server having only one site (sharepoint site). A page having 1000+ images. Loading in base page. And slide show in popup page.
Base page image painting is going on. At same time popup page image is not loading up to base page paint complete. I changed popup image download to some other server means working fine.
Here my problem is same domain more than 2 request web server (iis) not responding up to first 2 requests complete. We can call 2 requests at a time. How to increase more than 2 request in ie. This problem is not available in Firefox. Firefox can manage more than 2 requests. Ie not allows only 2 requests to one domain at a time.
How to send more than 2 requests from ie to a domain?
The statement is correct:
<asp:HyperLink
ID="HyperLink2"
runat="server"
Text="Telefone(s)"
NavigateUrl='<%#
"~/Autenticados/DadosClienteTelefone.aspx?codSegurado=" + DataBinder.Eval(FormView1.DataItem, "INT_CODSEGURADO") %>'
/>
The HyperLink does not work, I click and does nothing
I am developing the web site, It consists of device name list and related Build Button. When one click the Build button the one process will run in server. When more than ten user click the Build button more processes will create at that server will hang. How can send all request from client to single process in server.
View 2 RepliesHow to send request from one domain to another. And also get the response from that domain?
View 1 RepliesWe're trying to implement functionality that intercepts, inspects, and alters if needed data in the Request.QueryString and Request.Form collections.
Since Request.QueryString and Request.Form are readonly, is it possible to use a HttpModule to do this without Reflection or Response.Redirect?
We're thinking that we can construct a new HttpRequest, and replace the original one. Would there be any implications in doing this?
I know mocking this object is impossible without using HttpRequestWrapper, but wasn't sure whether ASP.NET sets other things beyond the constructor.
I have a webservice which works 100% fine on my developer machine. Where Web Service is installed on LOCALHOST on my developer machine,Then i went to my servers, I installed webservice on one server and map it with the server where the website is hosted, Then i tried accessing this service using BROWSER from my web server, it worked fine, That means the mapping was done perfect.Then i run my program on web server (website). It worked fine on page1, then on page2, but when i did the same and call same function on page3, It popped me any error of
View 4 RepliesIs it at all possible to inject a request into IIS for a page, have IIS and ASP.Net handle it as normal, but get the response as html handed back to me programmatically?
Yes, I know that I could connect to port 80 using WebRequest and WebResponse, but that becomes difficult if you are accessing the IIS server from the same physical machine (loopback security controls et al).
Basically, I want to inject the request (eg for [URL]) between the points at which IIS would normally talk to the browser, and the point at which it would route it to the correct ASP.Net application, and get a response back from IIS between the points at which ASP.Net/IIS applies the httpfilters and hands the html back to the browser.
I'm predominantly working with IIS7 so if there is a solution that works just for IIS7 then thats not an issue.
This is a input
<input type="image" src="<%=Url.Content("~/images/shopping-cart.jpg")%>" alt="shopping cart" id="btnshoppingCart" name="btnshoppingCart" value="shoppingCart" />
when i browse the page with firefox and click on the input Request.Params["btnshoppingCart"] != null or Request.Form["btnshoppingCart"] != null is statisfied.
When i browse the same page with internet explorer 8 and click on the same input Request.Params["btnshoppingCart"] != null or Request.Form["btnshoppingCart"] != null is not satisfied. When i used the watch i saw that there is no key by the name of "btnshoppingCart" in either Request.Form or Request.Params if input is clicked from internet explorer. However when it is clicked from firefox there is value "shoppingCart" inside Request.Form and Request.Params against "btnshoppingCart" key. One more strange thing that i observed was that are two keys "btnshoppingCart.x" and "btnshoppingCart.y" inside both Request.Form and Request.Params whenver clicking is done from both internet explorer and firefox. This is happening against all inputs of type image irrespective if the input is present inside a html form or not. Forms are created like this
<% using (Html.BeginForm("Action", "Controller", FormMethod.Post)){%>
The version of internet explorer is 8.0 and firefox is 3.6.6
I there a way to know if a request is a soap request on AuthenticateRequest event for HttpApplication? Checking ServerVariables["HTTP_SOAPACTION"] seems to not be working all the time.
public void Init(HttpApplication context) {
context.AuthenticateRequest += new EventHandler(AuthenticateRequest);
}
protected void AuthenticateRequest(object sender, EventArgs e) {
app = sender as HttpApplication;
if (app.Request.ServerVariables["HTTP_SOAPACTION"] != null) {
// a few requests do not enter here, but my webservice class still executing
// ...
}
}
I have disabled HTTP POST and HTTP GET for webservices in my web.config file.
<webServices>
<protocols>
<remove name="HttpGet" />
<remove name="HttpPost" />
<add name="AnyHttpSoap" />
</protocols>
</webServices>
Looking at ContentType for soap+xml only partially solves my problem. For example,
Cache-Control: no-cache
Connection: Keep-Alive
Content-Length: 1131
Content-Type: text/xml
Accept: */*
Accept-Encoding: gzip, deflate
Accept-Language: ro
Host: localhost
mymethod: urn:[URL]
Some clients instead of having the standard header SOAPAction: [URL], have someting like in example above. "mymethod" represents the method in my web service class with [WebMethod] attribute on it and [URL] is the namespace of the webservice. Still the service works perfectly normal. The consumers use different frameworks (NuSOAP from PHP, .NET, Java, etc).
I develop an asmx web service (i.e. ASP.NET 2.0). There's a piece of code that may read the contents of the HTTP request (via HttpContext.Current.Request.InputStream) while processing it. I realise that InputStream may only be read once for a request, and I make sure I never try to read it more than once.
The problem seems to be that if InputStream happens to be read during the early stages of the application's lifecycle (e.g. after pskill w3wp, during Application_Start), the HTTP request fails with a HTTP 400 - Bad Request error, with no explanation given, no exception thrown and no entry in the httperr log. If it is read later (e.g. within the web method itself), requests run fine whether InputStream is read or not. Application_Start runs fine if InputStream isn't read.
Is this some sort of ASP.NET bug? IIS bug? Or am I doing something wrong by daring to read InputStream? And if so, is there another way to get a look at the "raw" contents of the request without disturbing the inner workings of IIS/ASP.NET? In short, adding this code within Application_Start is enough to reproduce this error: using (StreamReader reader = new StreamReader(HttpContext.Current.Request.InputStream))reader.ReadToEnd();
I want to component to upload large filesP.How can I bypass request size и request processing time restrictions?
View 4 RepliesI am trying to use curl to access 3rd party webservice, I used the following code which works well if I try it on my own linux server, the data is being sent ok, but the IIS on the 3rd party server returns an error.
$longdata is a long string of data, maybe over 1000 characters long the 3rd party has many working clients with various implementations so the problem is on my side. what do I need to add to the request in order to get this through ?
<?php
$c = curl_init();
// curl_setopt($c, CURLOPT_HTTPHEADER, array('Expect:'));
curl_setopt($c, CURLOPT_URL, 'http://XXX.com/test/index.asmx');
curl_setopt($c, CURLOPT_POST, 1);
curl_setopt($c, CURLOPT_HEADER, 1);
curl_setopt($c, CURLOPT_RETURNTRANSFER, 1);
$post = array('param1' => 'XXXX', "param2" => "Y", "Param3" => $long_data);
curl_setopt($c, CURLOPT_POSTFIELDS, $post);
$response = curl_exec($c);
echo $response;
/*
Response:
HTTP/1.1 100 Continue
HTTP/1.1 500 Internal Server Error
Date: Tue, 05 Apr 2011 14:11:51 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
X-AspNet-Version: 2.0.50727
Cache-Control: private
Content-Type: text/plain; charset=utf-8
Content-Length: 100
Request format is invalid: multipart/form-data; boundary=----------------------------5d738237d9e0.
*/
?>
I am facing an issue while calling a web request thru my code. I have searched a lot on number of sites but did not get any solution.
Here is the code which I am using:
[Code]....
I have a project with lots of ObjectDataSource controls. They collect their data from various classes. am going to move all my classes (that handles the DAL) to a separate class library.Will that cause me any problems?How do i set the TypeName (directly in the .aspx file)?
View 2 Replies