IIS7 Rewrite - Strip HTTP Header?
Apr 1, 2010
Is it at all possible to use IIS7's rewrite capability in web.config to strip a particular HTTP header from a client request?We have an application that makes an HTTP POST to our website, and apparently the request contains the HTTP Expect header. Previously this was not a problem, but we've switched hosts and now the site is returning HTTP error 417 Expectation failed. So the real solution is to fix the software so it doesn't send the Expect header, but that can't happen soon enough for the folks in charge, who'd like to come up with an immediate web-based fix.I've used ISAPI_Rewrite before and I've read that it can strip a header, and the new host claimed they had ISAPI installed... but that seems to have been a lie, as I cannot get it to work, and support's only response on the subject is "use IIS7 Rewrite instead."
View 2 Replies
Similar Messages:
May 6, 2010
I have web services built with ASP.NET and ASP.NET clients consuming them. When consuming the webservices, how would I to force the clients to use https?
I don't want to force the whole site to use https by turning on require SSL in IIS.
Can I use the IIS7 URL rewrite module to re-route http requests to https?
View 2 Replies
Jan 18, 2010
I have the following setting in my web.config to redirect to a default page:
<defaultDocument>
<files>
<clear/>
<add value="default.aspx"/>
</files>
</defaultDocument>
For example when a user enters www.homeforhire.com they should be redirected to default.aspx (for operational reasons the user is then redirected to
www.homeforhire.com/home.aspx).
Instead an error is caught in the Rewrite module (which should not be activated). I am using an http module to perform URL rewriting.
It appears as if the default document setup is not working correctly, and the requested page ~/ is being sent to the Rewrite module, causing an error (which is then caught by my error handler and the user is redirected to the home page).
Entering www.homeforhire.com/default.aspx works correctly.
Can anyone tell me why the default document settings in the web.config do not appear to be working?
View 1 Replies
Jan 16, 2010
First, a little background. I have written a custom HTTP compression module for ASP.NET. My development machine has Windows 7 Ultimate, which comes with IIS7. My production environment uses IIS6.
The problem I'm having is, Resource Expert Droid (redbot.org) tells me that I need to add a header to my response to properly support compression: "Vary: Accept-Encoding"
On IIS7 in integrated mode, it works properly. However, in classic mode, which is how my application ultimately runs, I cannot get my code to output this header using any of Response.AppendHeader(), Response.Cache.SetVaryByCustom(), or Response.Cache.VaryByHeaders.
View 1 Replies
Oct 21, 2010
I am attempting to set the content-type of an asp.net .ashx file to text/plain.
When I run this through the ASP.NET Development Server, the content-type is properly set. When I serve it through IIS7, however, the content-type (and any other header values I set) don't come through (it came through as text/html).
The only value set in the HTTP Response Headers section of IIS Manager is the X-Powered-By attribute. I tried setting the content-type here, but that didn't work. But if I removed the X-Powered-By attribute, it was removed from the header.
[code]....
View 1 Replies
Feb 19, 2010
Is it possible to use iis7 url rewrite module for html pages?
Like this:
http://www.site.com/index.html?x=newfolder =>
http://www.site.com/newfolder
View 2 Replies
Sep 15, 2010
Experimenting with URL rewrites using this module, however I'm getting the following error when attempting to hit the URL. Looked online for answers, but not sure what the best way to get around this is...
HTTP Error 500.52 - URL Rewrite Module Error. Outbound rewrite rules cannot be applied when the content of
the HTTP response is encoded ("gzip"). IIS received the request; however, an internal error occurred during the processing of the request. The root cause of this error depends on which module handles the request and what was happening in the worker process when this error occurred. IIS was not able to access the web.config file for the Web site or application. This can occur if the NTFS permissions are set incorrectly. IIS was not able to process configuration for the Web site or application. The authenticated user does not have permission to use this DLL. The request is mapped to a managed handler but the .NET Extensibility Feature is not installed.
View 1 Replies
Nov 19, 2010
In my local enviroment it just works. Iam no IIS Admin so ....
i try the following
My domain "http://mysite.com/" goes to my url provided by my hosting service (discountasp.net)
I want that this url goes to the root/mysite/ virtual directory but i want that the url stays on "http://mysite.com/". So i defined the following rule, but it doesnt work for me.
here is my web.config that is placed in the root directory (generated by the IIS7 Remote Administration UI)
<?xml version="1.0" encoding="UTF-8"?>
<configuration>
<system.webServer>[code]....
View 1 Replies
Mar 9, 2010
I'm using the iis7 URL Rewrite module and it's working fine, except for two things. Being new to this, I might be missing something obvious.
1) My URL gets converted from www.mysite.com/search.aspx?fName=John&sName=Smith to www.mysite.com/John/Smith. This works fine, but if I add a trailing / , a few images on the site disappear, wheras a few don't. (They're all in the same location). However, the search results are fine.
2) Is it possible to make cerain querystrings optional? Server side, this is implemented (i.e. if nothing is entered, then assume a default value). But how would this work with the URL rewrite module? e.g. www.mysite.com/John would search for John and use a default value for the sName parameter.
View 1 Replies
Nov 20, 2010
I am using a project that rewrites URL. I am not familiar with this code, but it works fine on IIS 6 and with VS2010. Problem begins when I need to deploy into IIS7.5 server. Seems like the rewrite doesn't work and the page doesn't fount after rewriting page.
[Code]....
I am trying to use this web.config code, but then I could see this:
[Code]....
View 1 Replies
Apr 23, 2010
I've run into a strange problem regarding default buttons in master pages and IIS7 rewrite module. All my content pages have default buttons set in the code-behind (on prerender), or they are in panels on the aspx page. This works fine on my local machine and on the production server. However, when I enable IIS7 URL Rewrite, the default button is always to the one in the master page.
protected void LoginButton_PreRender(object sender, EventArgs e)
{
Button btnDefault = sender as Button;
this.Page.Form.DefaultButton = btnDefault.UniqueID;
}
That's how I set my default button in the code-behind. I'm not sure what the rewrite module could be doing.
View 1 Replies
Oct 30, 2010
I call a webservices from my javascript and im getting response as error.
Server did not recognize the value of HTTP Header SOAPAction:
View 1 Replies
Feb 24, 2011
I have a domain which is receiving quite a few hits per day and have been asked if I can serve the static content from a subdomain. As the site is quite extensive and already written, I was wondering if there is any way I can use URL rewriting to change:
www.example.com/image.gif
to
static.example.com/image.gif
I have a solution which works using 301 redirects but from what I understand, this is counter productive as 2 requests will have to be made per image. I don't really want to go through all the aspx pages and css to hard code the new url as it will cause problems further down the line - some parts of the site are still being developed and static content could change at any time. I tried using rewrite (as opposed to redirect) to change the url but it came out something like:
http://www.example.com/http://static.example.com/image.gif
How would you achieve this? I have full access to dns and the server (win 2008r2 / IIS 7.5) so can make any changes if url rewriting is not the answer.
View 1 Replies
Aug 20, 2010
is this something basic or am I missing something?My ASP.NET (4.0) site has a web.config with URL rewrite rules. When I run it in debug mode (local webserver) all the URLs fail because the local web server does not recognize the rules (e.g. I have /register which maps to register.aspx etc.)Is there someway I can get the debug system to recognize my URL rewrite rules? Should I be doing something else?
View 2 Replies
Feb 16, 2011
I need to force every request to https://www.mysite.com (always with https and www)
The site is hosted in GoDaddy and I need to do it via IIS7 URL Rewrite Module.
I've been able to do the HTTPS redirect with the following code:
<system.webServer>
<rewrite>
<rules>
<rule name="Canonical Host Name" stopProcessing="true">
<match url="(.*)" />
<conditions>
<add input="{HTTP_HOST}" pattern="^mysite.com$" />
</conditions>
<action type="Redirect" url="https://www.mysite.com/{R:1}" redirectType="Permanent" />
</rule>
</rules>
</rewrite>
</system.webServer>
Test cases
http://mysite.com -> https://www.mysite.com OK
http://www.mysite.com -> https://www.mysite.com NOT WORKING
I guess the condition is not being satisfied when I enter www.mysite.com in the browser, so there's no redirect and the page serves as HTTP instead of HTTPS.
I think I just need to modify the condition pattern, but I have almost nothing regex knowledge and I need this asap.
View 1 Replies
Dec 10, 2010
For an ASP.NET 4.0 / IIS7 web app, I would like to support compressed HTTP requests. Basically, I would like to support clients that would add Content-Encoding: gzip in the request headers, and compress the body accordingly.
Does anyone known how I achieve such a behavior?
View 1 Replies
Jun 24, 2010
We are planning to move our website to https, which currently running on only http only. Web site is running on IIS7 in Windows 2008 server. Do I need to update/modify any configuration settings in the website to make it work on HTTPS? Is it fine just installing certifictes?
View 3 Replies
Feb 4, 2011
I was hosting published site in IIS 7 on Windows 7 installed machine.I had done setting for .NET framework version, Security Options but got Error as shown below
HTTP Error 500.19 - Internal Server
Error
The requested page cannot be accessed because the related configuration data for the page is invalid. Detailed Error Information Module IIS Web Core Notification BeginRequest Handler Not yet determined
Error Code 0x800700b7
Config Error There is a duplicate
'system.web.extensions/scripting/scriptResourceHandler'
section defined
View 1 Replies
Mar 15, 2010
I have published my site using Visual Stuido's 2008 publish feature. I have then copied these files to a windows 2008 web server with IIS7 installed, it also has .net 3.5 sp1 and MVC installed In IIS I added the site using the 'Add a new site' right click option and then pointed this at the directory my site files are located in, I used the default application pool and it is set to integrated. Then when I attempt to browse I got the error message The Web server is configured to not list the contents of this directory. So I added Default.aspx to the default document list and I then get the following error message
HTTP Error 404.3 - Not Found The page you are requesting cannot be served because of the extension configuration. If the page is a script, add a handler. If the file should be downloaded, add a MIME map. Has anyone got any ideas on what I do next ? I have read lots of articles on this online but most are confusing and dont explain the solution in simple terms Surely it should be pretty straightforard to just deploy an MVC website to IIS7
View 4 Replies
Dec 22, 2010
I have a site that dynamically loads website contents based on domain host name, served from IIS7. All of the domains share a cached collection of settings. The settings are being flushed from the cache on almost every page request, it seems. This is verified by logging the times at which the Cache value is null and reloaded from SQL. This codes works as expected on other servers and sites. Is it possible that ASP.NET Cache is being stored separately for each domain host name?
View 3 Replies
Jan 7, 2011
I need to add an expires header to my .less files in IIS7. Not quite sure how to do it.
View 2 Replies
Feb 9, 2010
I have a simple web site with two pages. One displays a list of files, and the other streams a file when it's clicked in the list. All was fine in production for 6 months, but now I have to move the site to Windows 2008/IIS7. I have it mostly working, but the files don't open properly (in Firefox) because my content-type header is being ignored. On the production site (IIS6) the headers are (using Fiddler):
HTTP/1.1 200 OK
Date: Tue, 09 Feb 2010 16:00:51 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
X-AspNet-Version: 2.0.50727
Content-Disposition: attachment; filename="myfile__foo.pdf"
Content-Length: 236841
Cache-Control: no-cache, no-store
Pragma: no-cache
Expires: -1
Content-Type: application/octet-stream
but on the test IIS7 server I get:
HTTP/1.1 200 OK
Cache-Control: private
Content-Length: 236841
Content-Type: text/html; charset=utf-8
Server: Microsoft-IIS/7.5
X-AspNet-Version: 2.0.50727
Content-Disposition: attachment; filename="myfile__foo.pdf"
Fiddler also reports a protocol violation and says "Content-length mismatch: Response Header claimed 236841 bytes, but server sent 238378 bytes."
My code looks like this:
[code]....
View 1 Replies
Jun 15, 2010
We are implementing a single sign on mechanism in an enterprise environment, where the token is shared between applications using HTTP header. Now, in order to do the integration test, I need to write an application to simulate this. Is there any way in ASP.NET where I can redirect to another web-page and pass a custom HTTP header in the process?
View 3 Replies
May 14, 2010
I have an asp.net appliction on the one server. There I've added code on server-side in Page_Load:
Response.AddHeader("key", "password-key-from-hotel");
On the client side I have a form:
<form ... action="www.link-to-another-domaint" >
<input type="hidden" id="asd" value="fgh" >
....
</form>
<script type="text/javascript">
document.forms[0].submit();
</script>
Then on the other domain - there is also my other application - I'm trying to get the hedaer "key" by this code:
Request.Headers["key"].ToString();
But there is no such header. Is there is a desicion? Where is my mistake?
View 2 Replies
Aug 4, 2010
I have one ajax call web service, and want to add some http headers using javascript, can we do that use setrequestheader in ms ajax?This is my javascript
[Code]....
[Code]....
View 3 Replies
